7th Generation Maxima (2009-2015) Come in and talk about the 7th generation Maxima

Rims on their 7th Gen Max MEGA Thread!

Thread Tools
 
Search this Thread
 
Old Jan 5, 2016 | 07:44 PM
  #3001  
Swissbeast1's Avatar
Newbie - Just Registered
 
Joined: Nov 2015
Posts: 8
All you had to say is, I'm in the wrong thread. No need to be a jerk about. Smdh
Old Jan 5, 2016 | 08:52 PM
  #3002  
MaximaDrvr's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2012
Posts: 1,269
From: Charlotte, NC
Yes, because clearly a navigation question totally belongs in a wheel thread.
Smdh is right.

Last edited by MaximaDrvr; Jan 5, 2016 at 08:52 PM. Reason: .
Old Jan 11, 2016 | 09:39 AM
  #3003  
ATS's Avatar
ATS
Junior Member
 
Joined: Jun 2010
Posts: 27
From: escondido, ca
Originally Posted by Voltaire
New tires (Nitto Motivo) on Rohana RF1 (Brushed Titanium)

front: 20x9 ET35 w/ 255/35ZR20
rear: 20x10 ET45 w/ 295/30ZR20



Wowsers...super nice. Can you post more of a profile pic?
Old Jan 18, 2016 | 09:33 AM
  #3004  
brichi's Avatar
Member
 
Joined: Jan 2015
Posts: 227
so this is the setup I'm thinking or purchasing this week, Should everything fit good, no rubbing, good offset not to stick out, etc...... Im clueless on this stuff so I'm reaching out to the pros 1 more time now that I narrowed it down.





Old Jan 18, 2016 | 07:44 PM
  #3005  
Maximam's Avatar
Supporting Maxima.org Member
 
Joined: Nov 2000
Posts: 2,909
From: Reno, NV
Originally Posted by brichi
so this is the setup I'm thinking or purchasing this week, Should everything fit good, no rubbing, good offset not to stick out, etc...... Im clueless on this stuff so I'm reaching out to the pros 1 more time now that I narrowed it down.





All good except the tires. Do not get a Chinese tire.
Old Jan 19, 2016 | 05:13 AM
  #3006  
brichi's Avatar
Member
 
Joined: Jan 2015
Posts: 227
I have been hesitant because the 1 place i went to so far said the 20x10 would be too wide that i have to for 8.5 or 9. I really don't want to roll back the fenders and just toss these on as is and lower the car with Eibachs

the place was performanceplustire.com
Old Jan 19, 2016 | 02:46 PM
  #3007  
Maximam's Avatar
Supporting Maxima.org Member
 
Joined: Nov 2000
Posts: 2,909
From: Reno, NV
Originally Posted by brichi
I have been hesitant because the 1 place i went to so far said the 20x10 would be too wide that i have to for 8.5 or 9. I really don't want to roll back the fenders and just toss these on as is and lower the car with Eibachs

the place was performanceplustire.com
It is a stretch. I have Niche 20x9 with a 245 and that fits great.
Old Jan 19, 2016 | 02:48 PM
  #3008  
MaximaDrvr's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2012
Posts: 1,269
From: Charlotte, NC
I run a 9.5 with a 275 tire. You shouldn't have any problems.
Old Jan 19, 2016 | 07:06 PM
  #3009  
Maximam's Avatar
Supporting Maxima.org Member
 
Joined: Nov 2000
Posts: 2,909
From: Reno, NV
Originally Posted by MaximaDrvr
I run a 9.5 with a 275 tire. You shouldn't have any problems.
But you agree 255 on a 10 is a stretch.
Old Jan 20, 2016 | 09:07 AM
  #3010  
MaximaDrvr's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2012
Posts: 1,269
From: Charlotte, NC
Ahh, yes. That is fairly stretched.
I interpreted stretch as in close to not fitting.

A 275/30/20 would be a better tire size, but more expensive.
Old Jan 20, 2016 | 10:38 AM
  #3011  
brichi's Avatar
Member
 
Joined: Jan 2015
Posts: 227
20x9 - 255/35/20 or 245/35/20 2 different sites show 2 different recommendations, the bastards, lol
Old Jan 20, 2016 | 11:19 AM
  #3012  
Maximam's Avatar
Supporting Maxima.org Member
 
Joined: Nov 2000
Posts: 2,909
From: Reno, NV
Originally Posted by brichi
20x9 - 255/35/20 or 245/35/20 2 different sites show 2 different recommendations, the bastards, lol
245/35 has the closest overall diameter of the factory combo. On a 9" go 245 IMO.
Old Jan 20, 2016 | 02:23 PM
  #3013  
MaximaDrvr's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2012
Posts: 1,269
From: Charlotte, NC
245 is still a mild stretch on a 9".
I would recommend the 255/35 on a 9" wheel.
It is the other setup I run.

These are almost vertical, but still a micro amount of stretch.
255/35/20 DWS tires on a 20x9 et30 dropped on Bc coils about 3"


Last edited by MaximaDrvr; Jan 20, 2016 at 02:26 PM.
Old Jan 20, 2016 | 04:29 PM
  #3014  
Maximam's Avatar
Supporting Maxima.org Member
 
Joined: Nov 2000
Posts: 2,909
From: Reno, NV
Originally Posted by MaximaDrvr
255/35/20 DWS tires on a 20x9 et30 dropped on Bc coils about 3"

Loved the Conti DWS on my E55. I ran the first gens which had a mushy sidewall but I hear the new "06" has stiffened up the sidewalls. Great tire for those with four seasons. Currently I am trying the Comp 2 A/S through winter and so far am pretty impressed with the performance. I am not impressed with the aggressive looking sidewall tread.






Old Jan 20, 2016 | 05:12 PM
  #3015  
brichi's Avatar
Member
 
Joined: Jan 2015
Posts: 227
thank you so much, ill go 255/35
Old Feb 6, 2016 | 10:53 AM
  #3016  
phat89max's Avatar
Member
 
Joined: Sep 2001
Posts: 260
From: Monmouth County,New Jersey
Originally Posted by AZ_Rich
Came with the Velocity 20's, but I am not really liking them as much as I thought. Thinking of going closer to stock and going for the blacked out look.

I like the look.. Would look better with a slight drop Eibachs maybe?
Old Feb 9, 2016 | 01:39 PM
  #3017  
MidnightMaxima_22's Avatar
Member
 
Joined: Apr 2014
Posts: 101
From: SOUTH TEXAS





Installed my 20inch niche wheels
Old Feb 10, 2016 | 09:20 AM
  #3018  
dexcool's Avatar
Junior Member
 
Joined: Dec 2014
Posts: 66
From: Chicago, IL
Originally Posted by MidnightMaxima_22





Installed my 20inch niche wheels
I love these wheels, sheesh!!
Old Feb 15, 2016 | 04:44 AM
  #3019  
Squiddoc's Avatar
Junior Member
 
Joined: Jan 2016
Posts: 46
Originally Posted by Voltaire
I can finally post on this thread! :-D

Rohana RF1 in Brushed Titanium
Front: 20x9 (23 lbs) ET35 with 255/35-20 tires
Rear: 20x10 (24 lbs) ET45 with 285/30-20 tires






What is the name of the mesh grille on your Maxima? It looks awesome. I've been thinking of adding a billet grille but I feel mesh looks better.
Old Feb 15, 2016 | 05:17 PM
  #3020  
MidnightMaxima_22's Avatar
Member
 
Joined: Apr 2014
Posts: 101
From: SOUTH TEXAS
Originally Posted by dexcool
I love these wheels, sheesh!!
Thanx Bro
Old Feb 17, 2016 | 09:35 PM
  #3021  
Diehard's Avatar
Junior Member
 
Joined: Apr 2015
Posts: 28
Hi I'm new

Im new hi guys here's my set up so far















These I just bought they will be going on my car this weekend I am getting rid of the bronze
Old Feb 18, 2016 | 06:48 AM
  #3022  
beachbum23's Avatar
Newbie - Just Registered
 
Joined: Feb 2015
Posts: 12
From: Tampa, FL
Originally Posted by Diehard
Im new hi guys here's my set up so far















These I just bought they will be going on my car this weekend I am getting rid of the bronze
What are those bottom wheels from? It looks like a Nissan emblem in the middle of them
Old Feb 18, 2016 | 06:54 AM
  #3023  
Diehard's Avatar
Junior Member
 
Joined: Apr 2015
Posts: 28
Originally Posted by beachbum23
What are those bottom wheels from? It looks like a Nissan emblem in the middle of them
G37 rims
Old Feb 18, 2016 | 06:13 PM
  #3024  
Diehard's Avatar
Junior Member
 
Joined: Apr 2015
Posts: 28
New rims :D




G37 rims 😍
Old Feb 19, 2016 | 08:13 PM
  #3025  
MidnightMaxima_22's Avatar
Member
 
Joined: Apr 2014
Posts: 101
From: SOUTH TEXAS


At the gas station pulled up next to this max
Old Feb 19, 2016 | 08:14 PM
  #3026  
MidnightMaxima_22's Avatar
Member
 
Joined: Apr 2014
Posts: 101
From: SOUTH TEXAS
Originally Posted by Diehard



G37 rims 😍
Sick!!


Nice whip bro!
Old Feb 25, 2016 | 05:54 AM
  #3027  
jobiggs24's Avatar
Newbie - Just Registered
 
Joined: Feb 2016
Posts: 12
Originally Posted by Techsan
So, got the TSWs on. I wanted to go for a simple, clean look. I'm really liking them. Just trying to decide if I want to drop with Eibach and/or install spacers.
Which wheels are these? I like these a lot!
Old Feb 27, 2016 | 07:19 PM
  #3028  
steen27's Avatar
 
Joined: Feb 2016
Posts: 19
Originally Posted by Diehard



G37 rims ��

looks great! Are they the same size wheel front and back? What size tire are you running on those? Looks awesome man - congrats!
Old Mar 3, 2016 | 07:46 PM
  #3029  
Diehard's Avatar
Junior Member
 
Joined: Apr 2015
Posts: 28
Originally Posted by steen27
looks great! Are they the same size wheel front and back? What size tire are you running on those? Looks awesome man - congrats!
Yeah everything's the same front and back 245/40zr19
Old Mar 6, 2016 | 04:40 PM
  #3030  
Diehard's Avatar
Junior Member
 
Joined: Apr 2015
Posts: 28
New wheels again

I don't know I just like treating myself lol







Also I'm selling these g37 rims cheap with tires that I have on pervious picture
Old Mar 8, 2016 | 05:52 AM
  #3031  
jobiggs24's Avatar
Newbie - Just Registered
 
Joined: Feb 2016
Posts: 12
So I really like the MRR HR9's...I'm just confused about what offset to order. 8.5"(245/35/20) for the fronts and 9.5"(255/35/20) on the rears. Any help would be appreciated




Would 8.5" +35 and 9.5" +43 look good?

Last edited by jobiggs24; Mar 8, 2016 at 06:54 AM.
Old Mar 11, 2016 | 05:15 PM
  #3032  
HonorableRuler's Avatar
Newbie - Just Registered
 
Joined: Mar 2016
Posts: 4
From: Milwaukee Wisconsin
Finally got em on. Lovin em. Rohana rc7
Attached Thumbnails Rims on their 7th Gen Max MEGA Thread!-image.jpeg  
Old Mar 13, 2016 | 05:36 PM
  #3033  
Diehard's Avatar
Junior Member
 
Joined: Apr 2015
Posts: 28
Check these out :)




Decided to switch to 19s pot holes in nyc started to **** me off. I did a 245/45zr19 tire all the way around looks great on my car don't need to worry too much about lowering it 🤔 Loving it
Old Mar 21, 2016 | 08:14 AM
  #3034  
jobiggs24's Avatar
Newbie - Just Registered
 
Joined: Feb 2016
Posts: 12
20x8.5 +30 front 245/35/20
20x9.5 +35 rear 255/35/20







Old Mar 21, 2016 | 09:37 AM
  #3035  
Dudemaine's Avatar
Senior Member
iTrader: (1)
 
Joined: Dec 2013
Posts: 577
From: Rhode Island
Originally Posted by HonorableRuler
Finally got em on. Lovin em. Rohana rc7
Looks good man, nice work. Interesting placement on that LED light bar there, got my wheels turning. Pretty neat. You got any more pics with it on? How do you like it?
Old Mar 21, 2016 | 03:46 PM
  #3036  
Fubar 361's Avatar
Newbie - Just Registered
 
Joined: Mar 2016
Posts: 11
Originally Posted by HonorableRuler
Finally got em on. Lovin em. Rohana rc7
love the light bar
Old Mar 21, 2016 | 08:02 PM
  #3037  
HonorableRuler's Avatar
Newbie - Just Registered
 
Joined: Mar 2016
Posts: 4
From: Milwaukee Wisconsin
Originally Posted by Dudemaine
Looks good man, nice work. Interesting placement on that LED light bar there, got my wheels turning. Pretty neat. You got any more pics with it on? How do you like it?
Thank you. I love the light bar. It's crazy bright. Not sure if both with post but the pic from the side/behind the car is light bar only.
Attached Thumbnails Rims on their 7th Gen Max MEGA Thread!-image.jpeg  
Old Mar 21, 2016 | 08:04 PM
  #3038  
HonorableRuler's Avatar
Newbie - Just Registered
 
Joined: Mar 2016
Posts: 4
From: Milwaukee Wisconsin
Only the one posted. Here's a front shot.
Attached Thumbnails Rims on their 7th Gen Max MEGA Thread!-image.jpeg  
Old Mar 21, 2016 | 08:05 PM
  #3039  
HonorableRuler's Avatar
Newbie - Just Registered
 
Joined: Mar 2016
Posts: 4
From: Milwaukee Wisconsin
Originally Posted by Fubar 361
love the light bar
Thank you.
Old Mar 23, 2016 | 11:29 PM
  #3040  
xFlipy's Avatar
 
Joined: May 2013
Posts: 19
From: Sacramento, CA
K3 Projekt One.
20x9 +10 225/35
20x11 +15 255/35



Last edited by xFlipy; Mar 23, 2016 at 11:44 PM.



All times are GMT -7. The time now is 11:55 AM.