Perfect!!

 

Any rubbing issues?

 

hey ZarMaxima,

Could you get a side profile shot of the rear wheels on your Maxima to see how far they stick out?

Thanks

 

PM me your email and I’ll email you the ones I took. For some reason they won’t show on here.

 

Hi guys new to the forum just picked a new white Platinum with medallion package for my wife. I'm wanting to swap out the medallion wheels for some 20x10 Rohannas in a +45 offset with some 255/35/20 tires front and back. Vehicle will stay stock height for awhile since our current drive way is on a incline. Trying to avoid scrapping the front bumper. For you guys running the 20x10 setup, are you guys having any clearance issues with that setup while being stock height? I may drop the car later maybe an 1" or so, but it will be a while. Thanks..!!

 

Black out those pillars and that would be one hella of max.

 

245/35/20's









245/35/20's

 

Pre wheel's, Blacked out pillars.

 

 

Well stated. Hanging on 22+ inch plus wheels (not rims) and the larger tires in many cases can add lots of extra weight which will in fact slow down your cars performance in the quarter and 0-60. That combined with a truck like ride seems like too many trade offs. Wheels that are forged are made better and alot lighter so that is a better way to go but it will cost much more.

 

Does anyone have a picture of this said metal plate? I'm worried about the 20x10 +45 with 255 /35r20 will rub on this plate.

 

So I'm set on running a full set of Rohanna RF2 20x10 +45 with 255/35/r20 square on my wife's Maxima. I recieved great input from a couple members as far as fitment, but still worried about rubbing even though vehicle will be stock height. So I decided to pull off the front wheel liner and do some peeking. I believe I found the plate a couple members have mentioned about removing. This plate seems like the most likely location to rub since there is a rectangular hump that protrudes out from the plate. I not exactly sure about the purpose of the plate, maybe to add extra protection from blow out? Doesn' look like it would really add much more rigidity. I also didn't notice any major wiring harness behind the plate either at least on the drivers side. I'll probably remove the plate, heat up and reform the plastic liner in that location for extra clearance. 🤔

 

Do you have any pics of how the rf2's on your car? Would love to see them mounted

 

Not installed yet, they are on order. I will post pics when I get them on. Probably be in a couple weeks when I have the time to take the car in.

 

If I wanted to run 20x10 +38 offset would it rub? Would run 255/35/20 tires on it

Has anyone gone +35 offset with no issues? want to get the deepest concave in my rim possible

Cant wait to see this!

 

Hey folks,
So I'm narrowing down getting new rims/tires for summer. I pretty much got the wheel I'm going w/ but have been researching various threads here on size & doing a stare & compare w/ member feedback on what sizes rub/don't rub & trying to nail down offset & tire width. On willtheyfit.com it doesn't look like the poke & inset would be a huge difference if I get 19x9.5 w/ an offset of +42 to +45.(Tire size of 255/35/19) I am planning on lowering as well w/ Eibach springs. From all of the members that have provided feedback, it seems like offset of lower than +40 makes it more likely for rubbing. If anyone has feedback or running this size that can confirm, I would really appreciate it.
Thanks!
bghouse

 

245/30/20's and yes their is a slight rub on the front's when doing a tight turn/u-turn's.



245/30/20's and yes their is a slight rub on the front's when doing a tight turn/u-turn's.



245/30/20's and yes their is a slight rub on the front's when doing a tight turn/u-turn's.

 

Anyone interested in adding a nice touch to the interior of their max get these real aluminum layover switches <br/>EBAY Chrome Front seats adjust button switch Cover trims For 2016 2017 2018 Nissan Maxima<br/>Chrome Front seats adjust button switch Cover trims For 2016 2017 2018 Nissan Maxima<br/>( 192206209165 )<br/>

 

245/30/20's Gloss black wheel's.

 

You got 20x10s?

 

Bones,
What offset are those 20s?

 

Yes sir, except the tires are 245/35/20 not 245/30/20.

 

What do you think would help you not rub? And whats the full specs of rims?

 

20x8.5<br/>255-35-20. No rubbing at all

 

Whit,
What offset?

 

35 offset. And I used 5mm spacers on the rear

 

Thanks for the reply Whit, ride looks sick!

 

Thank you 😊

 

 

So 20x10 should be fine right? I was thinking about getting rims of this size. Also does bigger rims/bigger tires make your car slower?

 

I just wanted to thank everyone's input, information & help on this thread! After extensive looking and research I finally got my new shoes & luv em. Looking forward to installing my eibach springs in the next couple weeks, once I get my garage cleared. But on the wheels I ended up going w/ KMC 685, machined face, satin black. 19x9.5' w/ Nankang 245/40/19 tires offset +42. Very happy to report a perfect fit w/ no rubbing. Thanks again everyone!

 

Your Max almost look like mine. But mine or 20's.

 

yeah man, lookin good!

 

20x8

 

A couple pics of my wife's Maxima with the Rohana RF2 20x10 +45 with 255/35r20 Nitto on all 4 corners. Will post pics of the car clean and with the front splitter installed this weekend.

 

Absolutely. We make a variety of 20" wheels (1 piece, 2 piece, 3 piece) for the Maxima! Our head of shipping owns a 2017!

 

Those Vossen Wheels are sick.

 

20x8 all around.

 

Thanks. There are 3 styles and 19-22" sizes and various finish choices! www.vossenxwork.com

 

What offset do you recommend? I would want the most lip possible for my setup.