General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

I have a bad O2 sensor and now I have some ?'s

Thread Tools
 
Search this Thread
 
Old Dec 3, 2000 | 03:41 PM
  #1  
Black95Se's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Aug 2000
Posts: 425
I got the code 0901 which is FR O2 SEN HTR B1. I know this is the Front 02 sensor heater, but what is the B1? Also where is this located on the car? And how much will it cost to get a new one? Thanks
Old Dec 3, 2000 | 03:44 PM
  #2  
DanNY's Avatar
Ad·min·is·tra·tor
iTrader: (14)
 
Joined: Aug 2000
Posts: 17,724
if memory serves me correctly the front O2 is at the front downpipe part of the Y-pipe.
price is prob around $105 bucks or so..at courtesy nissan
Dan

Originally posted by Black95Se
I got the code 0901 which is FR O2 SEN HTR B1. I know this is the Front 02 sensor heater, but what is the B1? Also where is this located on the car? And how much will it cost to get a new one? Thanks
Old Dec 3, 2000 | 04:39 PM
  #3  
Black95Se's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Aug 2000
Posts: 425
I think the heater is bad not the sensor hence the HTR in the ECU code
Old Dec 3, 2000 | 06:01 PM
  #4  
1MAX2NV's Avatar
Moderator running more PSI than all the boosted Maximas... combined
iTrader: (5)
 
Joined: Aug 2000
Posts: 6,344
Bank 1 maybe. I remember reading something like that in the FSM. There are two o2 sensors on the y-pipe. One on each side. It's just telling you which one.

Originally posted by Black95Se
I got the code 0901 which is FR O2 SEN HTR B1. I know this is the Front 02 sensor heater, but what is the B1? Also where is this located on the car? And how much will it cost to get a new one? Thanks
Old Dec 3, 2000 | 06:38 PM
  #5  
NYCe MaXiMa's Avatar
...needs to please stop post whoring.
iTrader: (9)
 
Joined: Aug 2000
Posts: 9,284
O2 sensor...

Before you replace it,
I think there was a recall by Nissan on o2 Sensor in 95' Maximas. Might wanna check and see if your car has been recalled. Again, I am not sure about this.

Old Dec 4, 2000 | 12:35 AM
  #6  
buss95max's Avatar
Senior Member
 
Joined: Aug 2000
Posts: 1,991
Re: O2 sensor...

Originally posted by NYCe MaXiMa
Before you replace it,
I think there was a recall by Nissan on o2 Sensor in 95' Maximas. Might wanna check and see if your car has been recalled. Again, I am not sure about this.

Old Dec 4, 2000 | 05:19 AM
  #7  
JULIAN's Avatar
Donating Maxima.org Member
iTrader: (3)
 
Joined: Aug 2000
Posts: 276
I just changed mine a few weeks back >>>>.

and had the same code if I rememeber correctly, it was the O2 sensor closest to the oil filter. Very easy to change took like 15 minutes tops, get the O2 sensor from Courtesy for about $65. Remember to screw in the O2 sensor first on the exhaust manifold first before plugging it in to the wire harness to avoid twisting the 3 wires.Good Luck !!!!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bbsitum
4th Generation Maxima (1995-1999)
7
Sep 6, 2019 07:31 PM
Djsmaxima
6th Generation Maxima (2004-2008)
1
Sep 14, 2015 11:58 PM
conansriver
5th Generation Maxima (2000-2003)
0
Sep 11, 2015 10:26 AM




All times are GMT -7. The time now is 03:00 AM.