Valve cover vent?
Valve cover vent?
I just put in my SC and did the CAI.
What do I do with the vent line off of the valve cover?
Do I run it before the SC or after?
or do I just leave it to ambient preassure under the hood?
What do I do with the vent line off of the valve cover?
Do I run it before the SC or after?
or do I just leave it to ambient preassure under the hood?
I got the FMU in and ground out some of the SC plate where the wire goes thru that was pinched. I rev it up in park just to see and at higher RPM's it bogs down and tries to die...it did once. Almost as if it runs out of gas. But without gauges I can't be to sure. The guages don't get here til Mon the 24th.
Owe Valve body mod got here today. I will be putting it in on Mon or Tues.
I will have to be doing alot of tuning still.
Owe Valve body mod got here today. I will be putting it in on Mon or Tues.
I will have to be doing alot of tuning still.
Originally posted by LatinMax
I got the FMU in and ground out some of the SC plate where the wire goes thru that was pinched. I rev it up in park just to see and at higher RPM's it bogs down and tries to die...it did once. Almost as if it runs out of gas. But without gauges I can't be to sure. The guages don't get here til Mon the 24th.
Owe Valve body mod got here today. I will be putting it in on Mon or Tues.
I will have to be doing alot of tuning still.
I got the FMU in and ground out some of the SC plate where the wire goes thru that was pinched. I rev it up in park just to see and at higher RPM's it bogs down and tries to die...it did once. Almost as if it runs out of gas. But without gauges I can't be to sure. The guages don't get here til Mon the 24th.
Owe Valve body mod got here today. I will be putting it in on Mon or Tues.
I will have to be doing alot of tuning still.
if you are saying when it comes down off the revs it near or actually stalls, you need to raise the idle to about 800-900rpm.
Originally posted by LatinMax
I got the FMU in and ground out some of the SC plate where the wire goes thru that was pinched. I rev it up in park just to see and at higher RPM's it bogs down and tries to die...it did once. Almost as if it runs out of gas. But without gauges I can't be to sure. The guages don't get here til Mon the 24th.
Owe Valve body mod got here today. I will be putting it in on Mon or Tues.
I will have to be doing alot of tuning still.
I got the FMU in and ground out some of the SC plate where the wire goes thru that was pinched. I rev it up in park just to see and at higher RPM's it bogs down and tries to die...it did once. Almost as if it runs out of gas. But without gauges I can't be to sure. The guages don't get here til Mon the 24th.
Owe Valve body mod got here today. I will be putting it in on Mon or Tues.
I will have to be doing alot of tuning still.
Thread
Thread Starter
Forum
Replies
Last Post
TKHanson
5th Generation Maxima (2000-2003)
6
Nov 24, 2018 01:39 AM
tseng1023
5th Generation Classifieds (2000-2003)
3
Oct 15, 2015 08:30 AM
hayne
6th Generation Maxima (2004-2008)
2
Oct 5, 2015 11:53 AM