What's your cuurent project(s) and future plan on?
#1
What's your cuurent project(s) and future plan on?
let's hear it...
my current project - get my ghetto adjustable FMU tuned and figure out what causes the high EGT....
my future plan - water injection, S-AFC and get a cat-back system to complete the exhaust.
wishlist : larger injectors......
my current project - get my ghetto adjustable FMU tuned and figure out what causes the high EGT....
my future plan - water injection, S-AFC and get a cat-back system to complete the exhaust.
wishlist : larger injectors......
#3
I just finished making an adapter plate for a Pathfinder throttle body, so right now I'm working on getting that installed. I'm probably going to take the mevi off in order to match port it with the TB, so I'll be putting the USIM back on temporarily.
I'm also working on a modified intake pipe setup that ought to be a little less restrictive than the Stillen setup. Details later, it should be interesting.
In the near future, I'm putting Z32 injectors in, along with a JWT ecu and a Z32 maf. The Z32 maf will have to go before the SC inlet, so I'm working out the details related to that.
Longer term projects planned are a Cattman header/y-pipe and 3" cat back with Flowmaster muffler.
After all that, it's time to think about a Quaife.
Then, if I win the lottery or my son decides he wants to join the Army instead of going to college, I'm building an engine and going turbo.
I'm also working on a modified intake pipe setup that ought to be a little less restrictive than the Stillen setup. Details later, it should be interesting.
In the near future, I'm putting Z32 injectors in, along with a JWT ecu and a Z32 maf. The Z32 maf will have to go before the SC inlet, so I'm working out the details related to that.
Longer term projects planned are a Cattman header/y-pipe and 3" cat back with Flowmaster muffler.
After all that, it's time to think about a Quaife.
Then, if I win the lottery or my son decides he wants to join the Army instead of going to college, I'm building an engine and going turbo.
#4
Pathfinder TB as well, 550 cc injectors, JWT/something ECU/computer, New y-pipe, new down pipe, new exhaust, New turbo, some stuff that I have yet to figure out, trying to get 12 PSI, aiming for 400 WHP/TQ
Thinking about 245/40 19 's thinking traction and "stance"
Thinking about 245/40 19 's thinking traction and "stance"
#5
Well with about 12000 saved up. Im just waiting to get back to the world to do a auto to manual conversion and the good ole hairdryer to the engine bay. Im gonna spend about 10,000 on the maxima and the extra I have left, which after this deployment will be about 8000 will go to mymnext project, SE-R drag. Hey gotta still rep the nissan camp and destroy the VTEC badge
#6
Originally Posted by Stephen Max
or my son decides he wants to join the Army instead of going to college, I'm building an engine and going turbo.
Current plan - 3.125" pully, 370cc injectors, SAFC, dyno. Gonna tune it "Mardi Style" as there is no ECU option for me.
Next up (spring?) - Intercooler. Haven't decided between a FMIC or AWIC, but right now I'm leaning towards a FMIC.
#7
Built Level 10 Tranny with custom LSD (it's never been done before)
8.5:1 CR pistons from SGP Racing (already ordered)
Custom weight matched lightweight forged connecting rods (ordering next month from Pauter Machine)
Custom turbo kit of the T04B nature (still dunno exactly...too many choices)
Stand alone engine control system (FAST or something like it...still researching)
FMIC and appropriate piping
18x8" Volk GT-7's (maybe gunmetal) +38mm offset for the street and 16x8" TE-37's for the track
That's enough damage for one year...
8.5:1 CR pistons from SGP Racing (already ordered)
Custom weight matched lightweight forged connecting rods (ordering next month from Pauter Machine)
Custom turbo kit of the T04B nature (still dunno exactly...too many choices)
Stand alone engine control system (FAST or something like it...still researching)
FMIC and appropriate piping
18x8" Volk GT-7's (maybe gunmetal) +38mm offset for the street and 16x8" TE-37's for the track
That's enough damage for one year...
#8
My current project is rebuilding the entire turbo kit, which is 95% done.
What I did was ceramic coat all the exhaust piping except the downpipe. Made new Intercooler piping, new silicone couplers, new Tbolt clamps. Removed the steel brake line as the oil feed for turbo and put in a 6an braided line inplace with AN fittings. Re-did the fuel hoses with braided lines and AN fittings. Moved MAF over to intake side.
Also ordered a Big Brake kit will be here in two days. Also ordered a Carbon Fiber hood which will also be here soon.
So I think that enough for me for now.
Next plans are to go 5spd as soon as I smoke up my auto tranny.
Dixit
What I did was ceramic coat all the exhaust piping except the downpipe. Made new Intercooler piping, new silicone couplers, new Tbolt clamps. Removed the steel brake line as the oil feed for turbo and put in a 6an braided line inplace with AN fittings. Re-did the fuel hoses with braided lines and AN fittings. Moved MAF over to intake side.
Also ordered a Big Brake kit will be here in two days. Also ordered a Carbon Fiber hood which will also be here soon.
So I think that enough for me for now.
Next plans are to go 5spd as soon as I smoke up my auto tranny.
Dixit
#9
Supporting Maxima.org Member
iTrader: (3)
Join Date: Mar 2002
Location: Fort Collins, Colorado
Posts: 1,035
GT series BB turbo upgrade (been waiting for months to put on)
Larger injectors 370CC (really need 440CC or bigger)
Emanage first followed by standalone a little later
Big brake upgrade (waiting for months for the right parts)
Rods and pistons (shelved for now)
Electric cutout
Alcohol injection system
Larger injectors 370CC (really need 440CC or bigger)
Emanage first followed by standalone a little later
Big brake upgrade (waiting for months for the right parts)
Rods and pistons (shelved for now)
Electric cutout
Alcohol injection system
#10
gutting everything from front seats back
remove all radio components
put orange corner lights back in
get rid of 18's
drag slicks
new low mounted turbo with sump setup
Remove all AC components
garret GT3035R turbo (on order)
Emanage (have)
Larger Injectors (have)
pistons and rods (on order... should be here soon... hint hint hint haha)
quaife LSD (have)
cryotreat gear stacks (nothing yet)
I would also like to ditch my ****ty cattman coilovers for some JIC magic and get at least one racing seat, because leather + turns = no good...
F*CK SHOW, all go
remove all radio components
put orange corner lights back in
get rid of 18's
drag slicks
new low mounted turbo with sump setup
Remove all AC components
garret GT3035R turbo (on order)
Emanage (have)
Larger Injectors (have)
pistons and rods (on order... should be here soon... hint hint hint haha)
quaife LSD (have)
cryotreat gear stacks (nothing yet)
I would also like to ditch my ****ty cattman coilovers for some JIC magic and get at least one racing seat, because leather + turns = no good...
F*CK SHOW, all go
#11
2.87" Pulley
300Z TT Injectors
JWT SC/300z Injector programming
Aquamist
NOS 5124 Kit with 36hp jet
J&S Safeguard
Switch out S-AFC for Fields SFC
Then next year I scrap it all and go Turbo, after everyone else works out all the issues.
300Z TT Injectors
JWT SC/300z Injector programming
Aquamist
NOS 5124 Kit with 36hp jet
J&S Safeguard
Switch out S-AFC for Fields SFC
Then next year I scrap it all and go Turbo, after everyone else works out all the issues.
#13
Originally Posted by Y2KevSE
Current project:
- blow up motor when new motor is ready (or swap with another stock motor)
Future project:
- blow up motor when new motor is ready
- blow up motor when new motor is ready (or swap with another stock motor)
Future project:
- blow up motor when new motor is ready
#14
Originally Posted by Stephen Max
Some serious R&D work going on here...
Simple stuff
- Finish NX install (just need to connect the nitrous line and fill up bottle)
- GReddy Emanage (?)
- still searching for larger injectors (don't want to use additional injectors)
More complicated stuff
- Full motor build up
- AWD conversion
Just kidding on the AWD conversion.
#15
Originally Posted by Quicksilver
Built Level 10 Tranny with custom LSD (it's never been done before)
My tranny is built with posi-trac
current project
vq30det pistons
heavy duty valve springs
get rid of the safc-2 and get a greddy emanage
larger injectors want 555 but can only afford 370.
changing to intrax springs.
walbro fuel pump
sard fpr
14-18lb spring and manual boost controller
then blow up the new engine since that just my luck!!!
#16
Originally Posted by Redmax
My tranny is built with posi-trac
current project
vq30det pistons
heavy duty valve springs
get rid of the safc-2 and get a greddy emanage
larger injectors want 555 but can only afford 370.
changing to intrax springs.
walbro fuel pump
sard fpr
14-18lb spring and manual boost controller
then blow up the new engine since that just my luck!!!
current project
vq30det pistons
heavy duty valve springs
get rid of the safc-2 and get a greddy emanage
larger injectors want 555 but can only afford 370.
changing to intrax springs.
walbro fuel pump
sard fpr
14-18lb spring and manual boost controller
then blow up the new engine since that just my luck!!!
#17
I have 100% limited Slip in my car, its a custom differential made by NRH Transmissions in md. My tranny is fully built with kevlar clutch bands and high stall converter as well. knight Rider has the same tranny as mine
He actually posted everything thats in the tranny about 3 months ago in this post
http://forums.maxima.org/showthread....ght=nrh+kevlar
Maxnout has the same tranny too.
He actually posted everything thats in the tranny about 3 months ago in this post
http://forums.maxima.org/showthread....ght=nrh+kevlar
Maxnout has the same tranny too.
#18
Originally Posted by Redmax
I have 100% limited Slip in my car, its a custom differential made by NRH Transmissions in md. My tranny is fully built with kevlar clutch bands and high stall converter as well. knight Rider has the same tranny as mine
He actually posted everything thats in the tranny about 3 months ago in this post
http://forums.maxima.org/showthread....ght=nrh+kevlar
Maxnout has the same tranny too.
He actually posted everything thats in the tranny about 3 months ago in this post
http://forums.maxima.org/showthread....ght=nrh+kevlar
Maxnout has the same tranny too.
#19
Originally Posted by ejj
Current plan - 3.125" pully, 370cc injectors, SAFC, dyno. Gonna tune it "Mardi Style" as there is no ECU option for me.
#20
Originally Posted by deezo
He did use a GFORCE ECU though..
#21
Originally Posted by Stephen Max
I wish Matt would chime in more often than he does, but if you read his writeup on his webpage he says that he put the GFORCE on about 2 weeks after he had already installed the 370 injectors and gotten the car running.
#27
Originally Posted by ejj
What's that mean?
#28
- This Month
Vortech V1 Supercharger
Gatorback belt
3.125 Pulley and 3.33 Pulley (going to use the 3.3 until tranny is ready.)
Greddy Type - S BOV
Car-tech FMU
AEM FPR
Walbro fuel pump
Apexi - S-AFC
- After Christmas
Level 10 transmission upgrade
- Soon after that
Full suspension
- A while after that
Repaint the car
- And finally
Custom leather interior
Then I'll start saving for a new engine.
Vortech V1 Supercharger
Gatorback belt
3.125 Pulley and 3.33 Pulley (going to use the 3.3 until tranny is ready.)
Greddy Type - S BOV
Car-tech FMU
AEM FPR
Walbro fuel pump
Apexi - S-AFC
- After Christmas
Level 10 transmission upgrade
- Soon after that
Full suspension
- A while after that
Repaint the car
- And finally
Custom leather interior
Then I'll start saving for a new engine.
#29
my current project is to get this "supercharger" hooked up to my car somehow
actually i'm just trying to get my car running right now. Once I do I plan on keeping it near stock while building up my original engine for some big power.
actually i'm just trying to get my car running right now. Once I do I plan on keeping it near stock while building up my original engine for some big power.
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM
DC_Juggernaut
7th Generation Maxima (2009-2015)
4
09-28-2015 04:07 PM