Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   Supercharged/Turbocharged (https://maxima.org/forums/supercharged-turbocharged-38/)
-   -   "You'll blow the welds on your intake manifold" (https://maxima.org/forums/supercharged-turbocharged/199417-youll-blow-welds-your-intake-manifold.html)

hlh0501 Dec 28, 2003 03:01 AM

"You'll blow the welds on your intake manifold"
 
so fast and furious was right..
http://68.224.178.194/hlh0501/privat...i_problems.jpg

MardiGrasMax Dec 28, 2003 05:53 AM

FOK!

Nitrous backfire?

CullenJ76 Dec 28, 2003 06:34 AM

OMG! hope everything works out hal

CiViC KiLLeR Dec 28, 2003 07:36 AM

Dang that looks bad hope everthing works out.

hlh0501 Dec 28, 2003 07:41 AM

yes this hood is latched securely closed.
wtb: cf hood.

http://68.224.178.194/hlh0501/privat...od_problem.jpg

bottom:
http://68.224.178.194/hlh0501/privat...d_problem1.jpg

mardigras, you're quick. also can't really see it in the other pic, the intake manif. gasket or whatnot blew out from under the mevi too. every charge pipe I had blew off including the IC ones behind the bumper, the IAC hose blew off off(clamped), MAF let go, etc.
http://68.224.178.194/hlh0501/privat..._problems1.jpg

cullen, you missed all this fun last night down at 11th. lets just say I put on one heck of a show

for anyone who cares: motor seems fine.. car should run later today when I get myself in the garage.

CullenJ76 Dec 28, 2003 07:54 AM

haven't been to 11th or 13th in a LONG while.
you have to check your skivveys for stains after that one? :wall:
bet that sh!t was loud

stephenlc Dec 28, 2003 08:36 AM

What kind of shot were you running?

Fezzik Dec 28, 2003 09:22 AM

DANG HAL. If you're saying u'll be running again soon must not have been as bad as it looks in the pictures. I gotta hit 11th or 13th Street up sometime

CiViC KiLLeR Dec 28, 2003 10:36 AM

That is good it was just the manifold and not the motor. Good luck getting it all fixed.

Conrad283 Dec 28, 2003 11:12 AM

Oh man, pics don't work :( sounds bad

Jr'sMaxima Dec 28, 2003 12:00 PM

Wow........that had to have been a really loud bang! Hope everything works out.

redstradic Dec 28, 2003 02:22 PM

that shows you i have no clue about motors. the pictures look bad and it bent your hood like that, but yet you will have it drivable by today!

subs1000w Dec 28, 2003 04:27 PM

i know i guy with a 306 mustang. he was running a wet 150 shot and the same thing happed although his intake didnt break it just blew the freeze plugs, vacume hoses and all the intake hoses apart. he thinks fuel puddled in the bottom of the maniphold and a spark got up in there and ignited it. very scary stuff

MrGone Dec 28, 2003 06:55 PM

thats because you shouldnt run wet shots on 5.0 mustangs, the fuel puddles in the intake runners and BAM!

why do you think dry shots are so popular with them?

Quicksilver Dec 29, 2003 08:50 AM


Originally Posted by MrGone
thats because you shouldnt run wet shots on 5.0 mustangs, the fuel puddles in the intake runners and BAM!

why do you think dry shots are so popular with them?


Actually, the NX kit has never had any problems with puddling in the 5.0L or 4.6L GT engines...

I have friends that run that kit every day (silly bastards) with no damage at all.

MardiGrasMax Dec 29, 2003 09:22 AM

Sooner or later...

hlh0501 Dec 29, 2003 09:51 AM

couple more if anyone cares

http://68.224.178.194/hlh0501/privat..._problems2.jpg http://68.224.178.194/hlh0501/privat..._problems3.jpg

Dreizehn Dec 29, 2003 10:02 AM


Originally Posted by hlh0501


Is that coolant in the intake?

Was this a fuel puddling issue? Sorry I haven't been following too close...

C MAX Dec 29, 2003 10:03 AM


Originally Posted by MardiGrasMax
FOK!

Nitrous backfire?

yo sorry to hear about your car i look forward to exchanging some good car stories soon. i just dropped about 14,000 into my max it will be ready soon hopefully as fast as yours LOL.

dmontzsta Dec 29, 2003 10:03 AM

This is crazy stuff dude. That sucks that you damaged some prime aftermarket parts, CF hood, MEVI, etc...

hlh0501 Dec 29, 2003 10:31 AM

it was purely driver error closely related to nitrous (its a NX wet setup)

and yes that is coolant sitting in the busted MEVI, but it that is from the destroyed radiator thanks to shrapnel from the mevi, maf, pipes, hood etc, all which blew into my 1mo old radiator.

valves appear visually fine, and no af in the oil.. so I think the motor will be ok. cross your fingers

Originally Posted by MadMax95
Is that coolant in the intake?

Was this a fuel puddling issue? Sorry I haven't been following too close...


desertmaxima Dec 29, 2003 01:27 PM

What sucks even worse is that it was an MEVI, you guys know how hard it is to get those in.

CullenJ76 Dec 29, 2003 03:17 PM


Originally Posted by desertmaxima
What sucks even worse is that it was an MEVI, you guys know how hard it is to get those in.

not that hard anymore, but getting JUST the cover will be.

JAY25 Dec 29, 2003 04:13 PM

Now you and the mad Scietist are going to have sit there and rip apart the block and replace the piston rings you burnt :goofy:


What were you doing when that happened? :eek:

Got your PM will get you them Jpegs!

ABK Dec 29, 2003 11:53 PM

damn I seen a guy crack his intake matifold on dsm with his 20g that thing was pretty loud, I could imagine how loud that thing had to be!!!

luckee2bhere Dec 30, 2003 10:28 AM


Originally Posted by C MAX
i just dropped about 14,000 into my max .

tg


jebus! thats a healthy wad!

HitManSE Jan 1, 2004 01:13 AM

:eek: ouch is right. Goodluck man.

michaelnyden Jan 1, 2004 02:37 PM

what kinda shot were you runnin when you did this?

hlh0501 Jan 1, 2004 03:51 PM

What I always run... :nervous:
just too early.

Originally Posted by michaelnyden
what kinda shot were you runnin when you did this?


|Bijan| Jan 1, 2004 05:31 PM

Ouch -

http://www.student.smsu.edu/s/san232...astfurious.jpg

RULE # 50!!


Hope you get that up and runnin soon man.

Aaron92SE Jan 1, 2004 05:34 PM


Originally Posted by hlh0501
What I always run... :nervous:
just too early.

Oh, I was about to ask exactly how it was driver error, so that we could all learn from your mistake. But it sounds like you simply sprayed too early in a certain gear. Was that the only reason you think?

hlh0501 Jan 1, 2004 09:25 PM

yep, split second of spray - too early. it was at 8.7psi when it blew, so def not that.

I have put 10+ bottles at 10+psi on this exact setup with no problems.

got all the junk taken care of, hood for 65$ (and I get free painting), radiator 75$, maf 30$..

Originally Posted by Aaron92SE
Oh, I was about to ask exactly how it was driver error, so that we could all learn from your mistake. But it sounds like you simply sprayed too early in a certain gear. Was that the only reason you think?


CiViC KiLLeR Jan 1, 2004 10:06 PM

(bijan gxe) That is some funny ****!!!!!!!! Do you mind if I print that out and show some friends?

stephenlc Jan 2, 2004 07:39 AM

Sprayed in first gear?

plurco Jan 2, 2004 07:59 AM


Originally Posted by CiViC KiLLeR
(bijan gxe) That is some funny ****!!!!!!!! Do you mind if I print that out and show some friends?

I am sure it would not be nearly as funny if it were your car

MardiGrasMax Jan 2, 2004 09:19 AM


Originally Posted by spanishrice
Sprayed in first gear?

Prolly to low in the rpm range.

Ive sprayed on the hole with slicks and never had a problem.

Hal, I guess you didnt have an RPM window switch?

Blu Jan 2, 2004 09:24 AM


Originally Posted by spanishrice
Sprayed in first gear?


Im sure it was a higher gear. 1st gear can be sprayed out of the hole without problems. Its the taller gears that you have to be careful with that don't wind out so quick...

|Bijan| Jan 2, 2004 10:10 AM

CivicKiller - hell nah I dont care....I didnt make it :wall:



Those F&F pointers = funny as hell
Hal blowin his mevi = not funny

coincidence.....maybe

stephenlc Jan 2, 2004 10:14 AM

Why is spraying in too low an rpm bad? Is that bad in a gear other than first?

hlh0501 Jan 2, 2004 10:18 AM

I left a parking lot headed home to garage the max until it's gone. I normally NEVER show off, I pull up with the car almost idling in - in hopes to get some races haha. This was my last time the car would be out, so I figured I'd show off just once. I pulled out (with slicks) and gunned it in 1st gear - that gear is WICKED... then trouble came - 2nd gear. I let it sit, It got stuck at too low of rpm's , so the car wouldn't move and for the split second that it saw spray it created insane TQ and couldn't move. BAM.

The car gets engulfed by one giant flame (Seen from under the hood, out the rear view mirror etc). Traffic on all 4 lanes stops bc they can't see 100feet ahead bc of the smoke and I steer it over onto the sidewalk and jump and run. People run up with fire extinguishers but luckily nothing was on fire. Then the couple hour wait began for the tow truck, IN THE GHETTO in the middle of the morning.

No RPM window switch, although now I'm def a believer! haha

on a side note, Ijust picked up a new car and am getting real tempted to keep the max now haha.. SP67 is looking sooo good!

Originally Posted by MardiGrasMax
Prolly to low in the rpm range.

Ive sprayed on the hole with slicks and never had a problem.

Hal, I guess you didnt have an RPM window switch?



All times are GMT -7. The time now is 04:31 PM.


© 2026 MH Sub I, LLC dba Internet Brands