Well I'am in the process of getting some but, I don't know where to get them from, and I'am looking for either 440cc- 550cc injectors. Does any know a place?????

Thanks
James

 

You mean like, besides www.deatschwerks.com - the fuel injector company owned by one of our forum members

 

Deatschwerks are all side feed injectors, and the vq30dek takes top feed injectors, so that won't work........

 

They sell top feed as well

-matt

 

Thanks Matty I didn't know that. So what do you guys think I should get then, the 450cc or 555cc???? Please note that I will be using the SC 2.87 pulley soon, and getting the Greddy EU or maybe a Haltech.

 

Deatschwerks are not all side feed... I have deatschwerks top feeds. They sell tons and tons of styles...

 

http://www.rceng.com/technical.htm
Plug in the info and find out

 

I have DW injectors. Top-feed 555cc. They are a great company very fast with everything. They also provide flow charts with the injectors they give you. I also have the 2.87pulley and the car is getting tuned with the EU.

 

Thanks for the input Nealoc, and JSutter I checked rc-eng, but then they talk about "peak and hold injectors" which are low resistance, and saturated injectors for high resistance...........Lost me there on those two parts, don't know which to pick...LOL

 

Sweet..... 2.87 pulley + tuned EU=

 

He was just giving you the site because they have a good fuel injector size calculator on there... not that he was advocating RC injectors... at least I think that's why.

 

Yes, we do have injectors for the VQ30dek. 450, 550, or 650.

What type of power goals do you have? What type of fuel management are you planning to run? What fuel pressure do you plan to run?

It is a general ruel of thumb that you can get 1hp for every 1cc of injector on a 6cyl motor.

Going a bit bigger than needed on injector size is fine if you have the proper fuel management to controll them.

 

I know that, I had known about the site from before. But that was just something I couldn't figure out.

 

Great!!!! And I'am expecting 350whp or a little more once my car is done. Tuning will done with either a EU or a Haltech ecu. So I'am thinking the 450cc will do, but I really don't know.

 

so even if u want 350 hp and use a 2.87 pulley the 440c injectors can hold that?