I recently bought a supercharger kit from a fellow org member, it was missing some minor parts. But the Oil Tee adapter assembly on the oil feed line is messed up it drips about 3 drops of engine oil every 10 seconds. I tried looking on the web and cannot locate a vendor that sells one. If any of you supercharge maximas out there could please help.


Thanks

David

 

http://www.stealthmodeperformance.co...blockfit.shtml

Happy Boosting!

Eric

 

is the kit on the car right now? i am missing this part from my kit too. what i did was that i contacted stillen and told them to send me a replacement from the 350z sc kit. it HAS to be the same part.

you are so local, i wanna hear that I30 spooling !

 

Funny Vip maxima, i just send you a pm about the T fitting. Gonna try this one and ill let you know. Im in K-Town, if your swinging by let me know.

 

Get some 1/8 NPT plugs with that block fitting from stealthmode... Also use a light amount of RTV on the pressure senor, plug, block fitting male end, and the 1/8 NTP side of the 1/8 NTP to -4 AN conversion piece.

 

How does that Steathmode part work ??

-matt

 

Perfect... No leaks and everything fits in nice and good.

 

for feeding a turbo with this, is anything else needed? or this part will work well for feeding the turbo the oil it needs?

I've heard a reducer or restricted is needd to make sure the turbo doesnt get too much oil.

 

Depends on the turbo and the oil pressure from the car. I know the GT BB turbos and most BB turbos don't like high oil pressure and need a restrictor.