"FIX" for HP EVO's
 

From what I've read in previous posts about HP evo's the center cap for the front wheels do not fit correctly on our cars and there is a way to make them work. Anyone know about this?

i had this problem when i installed mine. all i did was get some black plastic stock about 1/8 thick, cut 2 circles with a 2 inch diameter, then put a 1 inch hole in the middle. superglued the two of them together (you need about 1/4 of plastic to fit over the peice that sticks out), then onto the black centercap they give you and finally put the logo on top.
by the way, i wish i had evos on a 2000 grey lustre, its got to be the sexiest look out there by far!! :wall:
http://img.photobucket.com/albums/v4...c/hpracing.jpg
you can sortof see the extensions on the centercap but you cant really tell unless your looking for it

5mm spacer...

how would spacers look with a 38mm offset?