Hubcentric Rings
#1
Hubcentric Rings
I've been looking for a set of these rings for some time now. They are for my 19"x8.5" Alessio F1's. 2 of them got damaged last year when I attempeted to take them off. Any ideas where to try?
-Clark
-Clark
#2
Measure the inner diameter of the wheel's bore. Most aftermarket wheels are 73mm. Nissan's use 66.1mm so you need a 73 to 66.1 ring. I picked up my set from ebay and they fit perfect. Here's the guy I bought mine from.
http://cgi.ebay.com/ebaymotors/ws/eB...1887286&rd=1,1
http://cgi.ebay.com/ebaymotors/ws/eB...1887286&rd=1,1
#5
You should actually do the measurement on your rim to be sure what you order...
Try TireRack. You will have to talk to a representative.
You MAY be able to run them without the rings depending how well they align themselves using the lugnuts though it's not recommended.
Try TireRack. You will have to talk to a representative.
You MAY be able to run them without the rings depending how well they align themselves using the lugnuts though it's not recommended.
Thread
Thread Starter
Forum
Replies
Last Post
Pied
4th Generation Maxima (1995-1999)
0
09-26-2015 03:29 PM