Wheels/Tires Looking for a new set of shoes for your car? Check out this forum. Sponsored by X-Rims.com

FS: 19" 3-piece chrome Work VS-xx wheels with tires

Thread Tools
 
Search this Thread
 
Old Jul 14, 2007 | 04:30 PM
  #1  
whazzzzuup's Avatar
Thread Starter
Senior Member
iTrader: (22)
 
Joined: May 2004
Posts: 1,827
FS: 19" 3-piece chrome Work VS-xx wheels with tires

My chrome Work VS-xx's are for sale. They are 19" Work VS-xx's with +38 offset all around. They are 8 inch wide in the front and 9 inch wide in the rear. The front tires are brand new Falken FK-452's (245/35/19), which were mounted last Friday. The left rear is a Pirelli P-Zero Nero with 4/32 tread and the right rear is a Toyo T1-R with 4/32, both in 275/30/19. The lips have been repolished on Friday also. All the curb rashes have been taken out. The outside fender on the front and rear clears with a few mm of clearance. I am lowered on Eibach Prokit btw. I give the wheels a 9 out of 10. If you look closely, there is a little bit of chrome chipping around the center cap area; the front passenger is the worst (which can barely be seen). Here is a thread with the wheels after repolishing and tire mounting.

http://www.clublexus.com/forums/showthread.php?t=292440

I am asking $2450 shipped. Paypal payments will require an additional 3.3%.

These pictures were taken a few hours ago.

Side profile:


Front (to show clearance):


Picture taken a week ago. Rear driver side to check for rubbing (car was jacked up on front passenger side):


Front driver:
Old Jul 14, 2007 | 04:30 PM
  #2  
whazzzzuup's Avatar
Thread Starter
Senior Member
iTrader: (22)
 
Joined: May 2004
Posts: 1,827
Rear driver:


Front passenger:


Rear passenger:


Random:


Thanks for looking!
Old Jul 14, 2007 | 05:31 PM
  #3  
CTmax02's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Oct 2002
Posts: 323
Do they fit IS350?
Old Jul 14, 2007 | 07:28 PM
  #4  
whazzzzuup's Avatar
Thread Starter
Senior Member
iTrader: (22)
 
Joined: May 2004
Posts: 1,827
Originally Posted by CTmax02
Do they fit IS350?
Yes, sir, it does. The offsets and widths needed for the 2nd gen GS, Maxima, and 2nd gen IS are very very similar.
Old Jul 17, 2007 | 02:06 AM
  #5  
whazzzzuup's Avatar
Thread Starter
Senior Member
iTrader: (22)
 
Joined: May 2004
Posts: 1,827
I've had a few offers, but nothing serious yet. Someone buy these!
Old Jul 17, 2007 | 10:49 PM
  #6  
sooner02r1's Avatar
Senior Member
iTrader: (6)
 
Joined: Oct 2004
Posts: 848
Bump for Van always having the nicest rims around.
Old Jul 18, 2007 | 07:23 AM
  #7  
hiren_patel_83's Avatar
Supporting Maxima.org Member
iTrader: (2)
 
Joined: Jun 2006
Posts: 689
From: Lawrenceville, GA
I think you put this in the wrong section!! People here won't pay 2450 for rims, because members much rather invest in performance.

They are nice wheels no doubt but i'd put in on ebay or something.
Old Jul 18, 2007 | 02:13 PM
  #8  
whazzzzuup's Avatar
Thread Starter
Senior Member
iTrader: (22)
 
Joined: May 2004
Posts: 1,827
Originally Posted by hiren_patel_83
I think you put this in the wrong section!! People here won't pay 2450 for rims, because members much rather invest in performance.

They are nice wheels no doubt but i'd put in on ebay or something.

Isn't this the wheel/tire subforum? If so, I think it's in the right section. Some members on this forum strive for performance and or appearance modifications. In most cases, they go for both. It's worth a try! Thanks for looking out!
Old Jul 19, 2007 | 09:15 AM
  #9  
nismo0604's Avatar
Supporting Maxima.org Member
iTrader: (18)
 
Joined: Nov 2004
Posts: 1,570
From: Springfield, MA
try my350z.com there is more of a market for work wheels over there
Old Jul 19, 2007 | 12:39 PM
  #10  
whazzzzuup's Avatar
Thread Starter
Senior Member
iTrader: (22)
 
Joined: May 2004
Posts: 1,827
Originally Posted by nismo0604
try my350z.com there is more of a market for work wheels over there
Yeah there is, but the offsets and widths are more applicable with the Maxima world.
Old Aug 23, 2007 | 12:00 PM
  #11  
whazzzzuup's Avatar
Thread Starter
Senior Member
iTrader: (22)
 
Joined: May 2004
Posts: 1,827
Price drop to $2350 shipped OBO. $1800 shipped without tires.
Old Aug 23, 2007 | 05:01 PM
  #12  
now gs's Avatar
Member
iTrader: (1)
 
Joined: Jan 2007
Posts: 78
From: Cali
how much do they weigh, the 8in and 9in no tires?
Old Aug 23, 2007 | 09:41 PM
  #13  
whazzzzuup's Avatar
Thread Starter
Senior Member
iTrader: (22)
 
Joined: May 2004
Posts: 1,827
Originally Posted by now gs
how much do they weigh, the 8in and 9in no tires?
Approximately 23lb for the 8 inch, and 25lb for the 9 inch.
Old Aug 23, 2007 | 09:42 PM
  #14  
whazzzzuup's Avatar
Thread Starter
Senior Member
iTrader: (22)
 
Joined: May 2004
Posts: 1,827
I have to make sure though.
Old Aug 24, 2007 | 05:48 AM
  #15  
ChromeSE5's Avatar
Senior Member
iTrader: (3)
 
Joined: Jan 2003
Posts: 3,533
From: San Diego
So what wheels are next?
Old Aug 24, 2007 | 12:25 PM
  #16  
BLACKonBLACK98's Avatar
Former Vendor
iTrader: (42)
 
Joined: Nov 2002
Posts: 5,414
From: Houston, TX
swithin up already? you're a beast. might wanna try www.vipstylecars.com they love the volks and spendin alot of money. whats next?
Old Aug 24, 2007 | 02:57 PM
  #17  
whazzzzuup's Avatar
Thread Starter
Senior Member
iTrader: (22)
 
Joined: May 2004
Posts: 1,827
I am in no rush to sell them. I want a JDM wheel with a huge huge lip!
Old Aug 27, 2007 | 07:42 PM
  #18  
Drockb418's Avatar
Senior Member
iTrader: (10)
 
Joined: May 2007
Posts: 1,393
From: Edmond Oklahoma
bump for living in Oklahoma!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
homeyclaus
Maximas for Sale / Wanted
1
Sep 3, 2015 06:15 PM
jerrod99_se-l
4th Generation Classifieds (1995-1999)
2
Aug 27, 2015 08:27 PM
cheftoo
New Member Introductions
1
Aug 24, 2015 09:20 AM
kenc15
5th Generation Classifieds (2000-2003)
0
Aug 5, 2015 08:29 AM




All times are GMT -7. The time now is 02:51 AM.