Maxima Forums
0 2025/11/24 18:46:41
0 2025/11/24 18:46:39
0 2025/11/24 18:42:01
0 2025/11/24 18:41:59
Interior console disassembled, no more cable will move rearward
Interior console disassembled, no more cable will move rearward
0 2025/09/18 11:57:28
Driver's side unhooked from caliper lever and housing un-clipped from caliper
Driver's side unhooked from caliper lever and housing un-clipped from caliper
0 2025/09/18 11:57:24
Passenger side, note lack of length compared with photos of driver's side
Passenger side, note lack of length compared with photos of driver's side
0 2025/09/18 11:57:19
Passenger side, unhooked from caliper lever, with collapsed boot
Passenger side, unhooked from caliper lever, with collapsed boot
0 2025/09/18 11:57:15
Driver's side still assembled
Driver's side still assembled
0 2025/09/18 11:57:12
0 2024/11/01 21:04:17
0 2024/11/01 21:04:15
Fob2
Fob2
0 2022/12/17 11:42:24
Fob1
Fob1
0 2022/12/17 11:42:20
0 2022/04/24 15:03:14
0 2022/01/19 16:08:56
0 2020/04/29 13:33:04
0 2020/04/12 17:05:13
0 2020/04/12 17:04:56
0 2020/04/12 17:04:35
0 2020/04/12 17:04:23
0 2020/04/12 17:03:20
0 2020/04/12 17:02:32
0 2020/04/12 17:02:05
0 2020/03/19 19:16:12
0 2020/03/06 18:45:59
this is a half-ass attempt to install both pads with springs into the assembled caliper. the springs fall out of the pad holes (because it's upside down, right)
this is a half-ass attempt to install both pads with springs into the assembled caliper. the springs fall out of the pad holes (because it's upside down, right)
0 2019/12/19 14:18:38
these are the springs installed on the pads
these are the springs installed on the pads
0 2019/12/19 14:18:34
this is how the springs are supposed to ride - INSIDE the caliper of course
this is how the springs are supposed to ride - INSIDE the caliper of course
0 2019/12/19 14:18:31
the clamp is 10" long
the clamp is 10" long
0 2019/11/30 11:41:35
another pic of the cv-boot style clamp
another pic of the cv-boot style clamp
0 2019/11/30 11:41:32
this is the cv-boot style clamp that was removed from the aftermarket rack itre
this is the cv-boot style clamp that was removed from the aftermarket rack itre
0 2019/11/30 11:41:29
the "other" style of cv boot clamp
the "other" style of cv boot clamp
0 2019/11/30 11:41:27
OEM wire, with outside clamp I am unable to install this as-designed - I can't keep it on the rack rim and twist it at the same time.
OEM wire, with outside clamp I am unable to install this as-designed - I can't keep it on the rack rim and twist it at the same time.
0 2019/11/30 11:41:24
the wrench necessary to install the cv-boot style clamps
the wrench necessary to install the cv-boot style clamps
0 2019/11/30 11:41:21
closeup of the "other" tool
closeup of the "other" tool
0 2019/11/30 11:41:17
Gearwrench tool to install the "other style"
Gearwrench tool to install the "other style"
0 2019/11/30 11:41:14
Stainless zip ties
Stainless zip ties
0 2019/11/29 10:49:37
Stainless zip ties
Stainless zip ties
0 2019/11/29 10:47:39
Stainless zip ties
Stainless zip ties
0 2019/11/29 10:42:58
details of magnet packaging
details of magnet packaging
0 2019/11/27 19:15:55