Maxima Forums
0 2018/07/07 13:09:13
0 2018/07/07 13:09:10
0 2018/07/07 13:09:08
Old black fluid...
Old black fluid...
0 2018/07/07 13:09:06
0 2018/07/07 13:04:10
0 2018/07/07 13:04:07
0 2018/07/07 13:04:04
0 2018/07/07 12:37:55
0 2018/07/07 12:37:17
0 2018/07/07 12:33:54
0 2018/07/05 18:41:42
0 2018/07/05 18:41:19
0 2018/07/05 18:40:53
0 2018/06/30 21:20:05
0 2018/06/30 21:17:08
0 2018/06/30 21:16:10
0 2018/06/30 20:32:25
0 2018/06/30 20:31:27
Diff bearing clearance is .018”’
Diff bearing clearance is .018”’
0 2018/06/29 23:42:57
Input shaft clearance is .050”. This correspond to
Input shaft clearance is .050”. This correspond to
0 2018/06/29 23:42:55
New Bearings pressed in.
New Bearings pressed in.
0 2018/06/29 23:42:52
Tranny case cleaned.
Tranny case cleaned.
0 2018/06/29 23:42:49
Bellhousing cleaned.
Bellhousing cleaned.
0 2018/06/29 23:42:47
Removing shifter rod seal. It was pretty easy to do.
Removing shifter rod seal. It was pretty easy to do.
0 2018/06/29 23:42:44
Diff assy with old bearings and seal and new ones next to it. The bearing for the front and back is identical. The driver side seal is different than the passenger side one. The diameter is the same but the lip construction is different.
Diff assy with old bearings and seal and new ones next to it. The bearing for the front and back is identical. The driver side seal is different than the passenger side one. The diameter is the same but the lip construction is different.
0 2018/06/29 23:42:42
Main shaft with old bearings/shims and new ones next to it. The front bearing is significantly smaller than the rear one.
Main shaft with old bearings/shims and new ones next to it. The front bearing is significantly smaller than the rear one.
0 2018/06/29 23:40:54
Input shaft with old bearings/seal/shims and new bearings and seals next to it. The front bearing is significantly smaller than the rear one.
Input shaft with old bearings/seal/shims and new bearings and seals next to it. The front bearing is significantly smaller than the rear one.
0 2018/06/29 23:40:51
Diff bearing shims. All the shims were installed in the tranny case side.
Diff bearing shims. All the shims were installed in the tranny case side.
0 2018/06/29 23:40:47
Pulling the Diff Bearings
Pulling the Diff Bearings
0 2018/06/29 23:40:45
0 2018/06/29 23:40:15
Rear (bell housing side) diff bearing removal. Not easy, since the speedo gear was on the way. You can see the lip got busted. Had to create different “lip” for the gear puller to grab on.
Rear (bell housing side) diff bearing removal. Not easy, since the speedo gear was on the way. You can see the lip got busted. Had to create different “lip” for the gear puller to grab on.
0 2018/06/29 23:26:49
Rear (bell housing side) main shaft bearing removed (didn’t need to be pressed out, just fell out).
Rear (bell housing side) main shaft bearing removed (didn’t need to be pressed out, just fell out).
0 2018/06/29 23:26:46
Removing the front (tranny case side) main shaft bearing.
Removing the front (tranny case side) main shaft bearing.
0 2018/06/29 23:26:45
Input Shaft Seal and oil channel for the main shaft. Notice the orientation of the lip.
Input Shaft Seal and oil channel for the main shaft. Notice the orientation of the lip.
0 2018/06/29 23:26:21
0 2018/06/29 23:23:43
0 2018/06/29 23:22:59
0 2018/06/29 23:21:09
0 2018/06/29 23:20:16
0 2018/06/29 23:18:07
0 2018/06/29 23:17:41