Maxima Forums
Burnt at base of #7 pin ... original EFI relay ... BAD!
Burnt at base of #7 pin ... original EFI relay ... BAD!
0 2016/10/09 10:43:15
Before & After: Top Side of INJECTORS
Before & After: Top Side of INJECTORS
0 2016/02/21 15:04:59
Before & After Cleaning: BARE INJECTORS
Before & After Cleaning: BARE INJECTORS
0 2016/02/21 15:04:10
Crap from injector cleaning
Crap from injector cleaning
0 2016/02/21 15:03:13
Close-up of new PINTLE CAPS
Close-up of new PINTLE CAPS
0 2016/02/21 15:02:22
Before & After: REFURBISHED INJECTORS with new, lubed o-rings, screens & pintle caps
Before & After: REFURBISHED INJECTORS with new, lubed o-rings, screens & pintle caps
0 2016/02/21 15:01:01
Before & After Cleaning: RETAINER CLIPS with new bolts
Before & After Cleaning: RETAINER CLIPS with new bolts
0 2016/02/21 14:59:40
Injectors out ... insides look clean, only cruddy around top edges
Injectors out ... insides look clean, only cruddy around top edges
0 2016/02/21 14:58:26
1st view of original injectors with UIM, connectors & retainer clips off
1st view of original injectors with UIM, connectors & retainer clips off
0 2016/02/21 14:57:12
1st obvious issue - CPS O-Ring FAIL
1st obvious issue - CPS O-Ring FAIL
0 2015/03/21 10:41:02
The culprit - CPS O-Ring FAIL - snapped like a toothpick
The culprit - CPS O-Ring FAIL - snapped like a toothpick
0 2015/03/21 10:37:36
Cleaned up TC Cover around CPS but everything below still caked with sludge
Cleaned up TC Cover around CPS but everything below still caked with sludge
0 2015/03/21 10:37:36
Lower view of oil leak mess
Lower view of oil leak mess
0 2015/03/21 10:37:36
Lower view of oil sludge from leak(s) on Alternator
Lower view of oil sludge from leak(s) on Alternator
0 2015/03/21 10:34:37
Airbox & MAF off (cleaned) - original UIM Gasket seepage
Airbox & MAF off (cleaned) - original UIM Gasket seepage
0 2015/03/21 10:34:37
UIM ... OFF!
UIM ... OFF!
0 2015/03/21 10:34:37
Valentines Day 2015 - this is what my boyfriend came home to find me doing in our garage when he returned from working on the road - tune up done & ready to put the UIM back on
Valentines Day 2015 - this is what my boyfriend came home to find me doing in our garage when he returned from working on the road - tune up done & ready to put the UIM back on
0 2015/03/21 10:27:14
UIM removed - EGR Port & Tube cleaned (COMPLETELY packed full with carbon, blocked solid) - also removed & cleaned out IACV & TB along with their ports on the UIM
UIM removed - EGR Port & Tube cleaned (COMPLETELY packed full with carbon, blocked solid) - also removed & cleaned out IACV & TB along with their ports on the UIM
0 2015/03/21 10:27:14
Original gasket seepage & the infamous blocked EGR Tube
Original gasket seepage & the infamous blocked EGR Tube
0 2015/03/21 10:27:14
Before & after cleaning - Rear Valve Cover
Before & after cleaning - Rear Valve Cover
0 2015/03/21 10:25:03
Rear VC - mating surfaces cleaned
Rear VC - mating surfaces cleaned
0 2015/03/21 10:25:03
Rear Valve Cover with new Gasket, Tube Seals & Grommets
Rear Valve Cover with new Gasket, Tube Seals & Grommets
0 2015/03/21 10:25:03
Original Gasket seepage on Front VC with cover plate off
Original Gasket seepage on Front VC with cover plate off
0 2015/03/21 10:22:05
Gasket Fail Sludge before cleaning Front VC mating surfaces
Gasket Fail Sludge before cleaning Front VC mating surfaces
0 2015/03/21 10:22:05
Before & after cleaning - Front Valve Cover
Before & after cleaning - Front Valve Cover
0 2015/03/21 10:22:05
Varnish & fused Plug Tube Seals inside Front Valve Cover
Varnish & fused Plug Tube Seals inside Front Valve Cover
0 2015/03/21 10:18:55
Front VC - mating surfaces clean
Front VC - mating surfaces clean
0 2015/03/21 10:18:55
Front VC replaced with new Gasket, Tube Seals & Grommets
Front VC replaced with new Gasket, Tube Seals & Grommets
0 2015/03/21 10:18:55
Spark Plugs, Valve Covers & Gaskets - done!
Spark Plugs, Valve Covers & Gaskets - done!
0 2015/03/21 10:06:25
Me putting UIM back on
Me putting UIM back on
0 2015/03/21 10:06:25
Oil leak nightmare
Oil leak nightmare
0 2015/03/21 10:06:25
Most sludge wiped off - oil like mud
Most sludge wiped off - oil like mud
0 2015/03/21 10:00:31
Everything top-end cleaned & replaced
Everything top-end cleaned & replaced
0 2015/03/21 10:00:31
All the crap that got replaced top-end
All the crap that got replaced top-end
0 2015/03/21 10:00:31
No choice but to cut out old bolts & bushings to make bolt holes available for "the fix"
No choice but to cut out old bolts & bushings to make bolt holes available for "the fix"
0 2015/03/21 09:54:54
Fit & bolted in steel bar with some rubber gasket material in lieu of bushings, original bolt holes
Fit & bolted in steel bar with some rubber gasket material in lieu of bushings, original bolt holes
0 2015/03/21 09:54:54
Props to the boyfriend - end result of homemade repair for rusted out Radiator Core Support - SOLID.
Props to the boyfriend - end result of homemade repair for rusted out Radiator Core Support - SOLID.
0 2015/03/21 09:54:54
Top down view of oil leak mess with Condenser & Alternator removed
Top down view of oil leak mess with Condenser & Alternator removed
0 2015/03/21 09:51:36
Varnish & selant residue - Upper Oil Pan
Varnish & selant residue - Upper Oil Pan
0 2015/03/21 09:51:36
Oil leaks are messy - looking up from Condenser position toward Alternator Mount & Thermostat Port
Oil leaks are messy - looking up from Condenser position toward Alternator Mount & Thermostat Port
0 2015/03/21 09:51:36