Maxima Forums
Clear lens '06 TSX projectors. Nice wide beam, crisp cut-off and decent output. Didn't take much creativity to get these to replace the stock projectors.
Clear lens '06 TSX projectors. Nice wide beam, crisp cut-off and decent output. Didn't take much creativity to get these to replace the stock projectors.
2 2009/01/27 12:13:35
'09 Gen 4 Matsushita Ballasts. Yes, the stock halogen combination light is the same as the xenon version, so these just screw right into the recess on the bottom on the headlight.
'09 Gen 4 Matsushita Ballasts. Yes, the stock halogen combination light is the same as the xenon version, so these just screw right into the recess on the bottom on the headlight.
1 2009/01/27 12:13:35
Violet fringe as seen 20" off the ground at 40 feet
Violet fringe as seen 20" off the ground at 40 feet
1 2009/01/26 23:02:08
Violet color fringe example - my camera can't capture the true vivid color produced by the stock projectors. I assume the color is due to a slightly mis-positioned (rebased) bulb.
Violet color fringe example - my camera can't capture the true vivid color produced by the stock projectors. I assume the color is due to a slightly mis-positioned (rebased) bulb.
1 2009/01/26 23:02:08
TSX pattern with Halogen high beams fogs. Camera doesn't do it justice
TSX pattern with Halogen high beams fogs. Camera doesn't do it justice
1 2009/01/26 22:56:41
TSX projector front view - negligable glare and nice wide pattern
TSX projector front view - negligable glare and nice wide pattern
1 2009/01/26 22:53:46
TSX projector cut off with a 2 washer color mod.
TSX projector cut off with a 2 washer color mod.
1 2009/01/26 22:53:46
TSX projector (right) versus Stock Halogen projector. The TSX doesn't have the plastic lens on the headlight - was adjusting the rotation and aim.
TSX projector (right) versus Stock Halogen projector. The TSX doesn't have the plastic lens on the headlight - was adjusting the rotation and aim.
1 2009/01/26 22:53:46
Stock Projectors 5000K Pattern
Stock Projectors 5000K Pattern
1 2009/01/26 09:49:18
xenon HL exploded schematic
xenon HL exploded schematic
1 2009/01/25 00:19:13
Rebased H11 5000K HID in stock projector (right side only). Definitely more center focused than the TSX projectors.
Rebased H11 5000K HID in stock projector (right side only). Definitely more center focused than the TSX projectors.
1 2009/01/24 23:45:44
HID 5000K vs Halogen (stock projectors)
HID 5000K vs Halogen (stock projectors)
1 2009/01/24 23:43:26
Violet fringe disappears when viewed at heights above 24", but still hints of blue/purple
Violet fringe disappears when viewed at heights above 24", but still hints of blue/purple
0 2009/01/26 23:02:08
How they look from a sharper angle
How they look from a sharper angle
0 2009/01/26 22:58:45
TSX projectors (with 2 washer color mod) cut off pattern
TSX projectors (with 2 washer color mod) cut off pattern
0 2009/01/26 22:58:45
TSX pattern with fogs on
TSX pattern with fogs on
0 2009/01/26 22:56:41
Stock Projector 5000K with fogs on
Stock Projector 5000K with fogs on
0 2009/01/26 09:55:22
Stock Projector 5000K with fogs off
Stock Projector 5000K with fogs off
0 2009/01/26 09:55:22
VelocityGetter Ballast & Bulb
VelocityGetter Ballast & Bulb
0 2009/01/26 09:51:46
H11 rebased pic overlayed on stock H11. Xenon capsule still about 0.5mm too far into lamp which probably causes the wild color and less sharp cut-off
H11 rebased pic overlayed on stock H11. Xenon capsule still about 0.5mm too far into lamp which probably causes the wild color and less sharp cut-off
0 2009/01/26 09:51:46
Front of fender protector pulled down
Front of fender protector pulled down
0 2009/01/26 09:51:46
What you can see behind the fender protector - circled tab is a good place to fix the ballast
What you can see behind the fender protector - circled tab is a good place to fix the ballast
0 2009/01/26 09:49:18
Stock projectors pattern with fogs on. You can see some of the intense blue/purple color at the cut-off. More color than the TSX projectors (even with the color mod).
Stock projectors pattern with fogs on. You can see some of the intense blue/purple color at the cut-off. More color than the TSX projectors (even with the color mod).
0 2009/01/26 09:49:18
Headlight Removal Exploded Schematic
Headlight Removal Exploded Schematic
0 2009/01/25 00:20:33
halogen exploded schematic
halogen exploded schematic
0 2009/01/25 00:19:13
7th Gen Headlight Parts - Pretty sure that the combination light is shared between the Halogen & Xenon setups.
7th Gen Headlight Parts - Pretty sure that the combination light is shared between the Halogen & Xenon setups.
0 2009/01/25 00:19:13
H11 conversion with squirrel leakage. Picture taken at 2-3' from light.
H11 conversion with squirrel leakage. Picture taken at 2-3' from light.
0 2009/01/24 23:50:13
Stock projector HID H11 conversion /w squirrel blocked. Very little leakage above the cut-off.
Stock projector HID H11 conversion /w squirrel blocked. Very little leakage above the cut-off.
0 2009/01/24 23:48:24
Stock halogen (left) and rebased H11 Xenon (right) in stock projectors.
Stock halogen (left) and rebased H11 Xenon (right) in stock projectors.
0 2009/01/24 23:48:24
stock H11 halogen pattern (left only)
stock H11 halogen pattern (left only)
0 2009/01/24 23:45:44
Stock projector Halogen/Xenon comparison. Surprisingly little glare, actually more glare from stock H11 halogen bulb. Pic taken 24" off the ground at 30 feet
Stock projector Halogen/Xenon comparison. Surprisingly little glare, actually more glare from stock H11 halogen bulb. Pic taken 24" off the ground at 30 feet
0 2009/01/24 23:45:44
The hidden bolt holding on the bumper facia. You can get access without removing the fender protector completely. Then pull the facia out away from the body to release the slip in clips.
The hidden bolt holding on the bumper facia. You can get access without removing the fender protector completely. Then pull the facia out away from the body to release the slip in clips.
0 2009/01/24 23:43:26
Passenger side back of headlight from inside the wheel well. H11 bulb removed. Remember to remove the red silicon/rubber seal before trying to install your rebased H11 bulb (it should have its own seal).
Passenger side back of headlight from inside the wheel well. H11 bulb removed. Remember to remove the red silicon/rubber seal before trying to install your rebased H11 bulb (it should have its own seal).
0 2009/01/24 23:43:26