Maxima Forums
0 2011/06/14 06:02:28
2009 VQ35 CAM POS Signal
2009 VQ35 CAM POS Signal
0 2011/06/01 05:32:22
2002 VQ35 CAM POS Signal
2002 VQ35 CAM POS Signal
0 2011/06/01 05:32:22
EVAP Canister Purge Control Volume Valve and EVAP Canister Purge Control Valve
EVAP Canister Purge Control Volume Valve and EVAP Canister Purge Control Valve
0 2011/03/14 06:09:21
Old plate thickness
Old plate thickness
0 2010/11/21 17:26:51
New plate thickness
New plate thickness
0 2010/11/21 17:26:51
Old barrel diameter.
Old barrel diameter.
0 2010/11/21 17:26:51
New barrel diameter
New barrel diameter
0 2010/11/21 17:25:09
Slides side by side. Left is old version. Right is new.
Slides side by side. Left is old version. Right is new.
0 2010/11/21 17:25:09
Side by side of slides and plates. Left is old, right is new.
Side by side of slides and plates. Left is old, right is new.
0 2010/11/21 17:25:09
0 2010/10/05 19:10:58
0 2010/10/05 19:10:58
0 2010/10/05 19:10:58
front view
front view
0 2010/10/01 14:50:19
closer front view
closer front view
0 2010/10/01 14:50:19
left view
left view
0 2010/10/01 14:50:19
Figure 6. Inhibitor harness to reverse neutral switch taped up.
Figure 6. Inhibitor harness to reverse neutral switch taped up.
0 2010/08/26 08:51:50
Figure 5. ASCD brake/clutch cancel switch harness wired to ASCD brake cancel switch harness.
Figure 5. ASCD brake/clutch cancel switch harness wired to ASCD brake cancel switch harness.
0 2010/08/26 08:48:45
Figure 4. ASCD brake pedal cancel switch disconnected and wires from the ASCD brake/clutch pedal cancel switch harness.
Figure 4. ASCD brake pedal cancel switch disconnected and wires from the ASCD brake/clutch pedal cancel switch harness.
0 2010/08/26 08:48:45
Figure 3. Extend the wires on the clutch interlock switch harness to reach the ACU connector.
Figure 3. Extend the wires on the clutch interlock switch harness to reach the ACU connector.
0 2010/08/26 08:47:15
Figure 2. ACU harness and connections.
Figure 2. ACU harness and connections.
0 2010/08/26 08:47:15
Figure 1. Inhibitor and R/N switch harness
Figure 1. Inhibitor and R/N switch harness
0 2010/08/26 08:47:15
parking lamp wire color
parking lamp wire color
0 2010/08/19 05:27:13
EU Connector Pinout
EU Connector Pinout
0 2010/08/13 04:58:06
Custom Emanage Ultimate harness with built in resistors.
Custom Emanage Ultimate harness with built in resistors.
0 2010/08/11 14:01:12
Close up of label. B-12 (24) stands for connector B, pin 12, wire 24.
Close up of label. B-12 (24) stands for connector B, pin 12, wire 24.
0 2010/08/11 14:01:12
Each wire has a label. Each label is formated as follows: connector letter-pin number (wire number)
Each wire has a label. Each label is formated as follows: connector letter-pin number (wire number)
0 2010/08/11 14:01:12
Harness plugged into EU
Harness plugged into EU
0 2010/08/11 13:59:26
The small cylindrical looking thing in the foreground is the resistors potted in epoxy.
The small cylindrical looking thing in the foreground is the resistors potted in epoxy.
0 2010/08/11 13:59:26
Overview for scale. This harness is four feet long.
Overview for scale. This harness is four feet long.
0 2010/08/11 13:59:26
VQ30 cam orientation
VQ30 cam orientation
0 2010/08/08 14:36:00
Rev Up cam orientation
Rev Up cam orientation
0 2010/08/08 14:36:00
VQ35DE Cam orientation
VQ35DE Cam orientation
0 2010/08/08 14:36:00
cam timings revup and non revup vq35de
cam timings revup and non revup vq35de
0 2010/08/02 10:05:30
Front-ish view of controller and bracket.
Front-ish view of controller and bracket.
0 2010/07/16 19:08:11
One cable has been spliced after cutting it, and the other is cut.
One cable has been spliced after cutting it, and the other is cut.
0 2010/07/16 19:06:17
Rear view of OS controller and bracket.
Rear view of OS controller and bracket.
0 2010/07/16 19:06:17
View of controller and bracket from below.
View of controller and bracket from below.
0 2010/07/16 19:06:17
MT case components
MT case components
0 2010/06/29 04:30:14
knock sensor
knock sensor
0 2010/06/17 04:58:56