Why is my strut almost touching my tire?
#1
Why is my strut almost touching my tire?
i have k-sports, and i am not to low about 2 inches. and i went to get an alignment today? He said he coudl not do it cause mu strut is aboce 1/8th inch from my tire. I looked and it is!
where my bottom spring pearch is it like about right on the tire. 1/8th inch off. Sorry if this is not a good expenation, but i will try to get some pics.
the guys said it might be a bent spindle? does this sound liek something i culd be or do anyone have any other idea's
where my bottom spring pearch is it like about right on the tire. 1/8th inch off. Sorry if this is not a good expenation, but i will try to get some pics.
the guys said it might be a bent spindle? does this sound liek something i culd be or do anyone have any other idea's
#5
Originally Posted by JSutter
You may have dialed in all the negative camber with the slotted hole in the strut bolts. It would angle the tire close to the strut if you have set it like that.
#6
Originally Posted by ManualMaxima
can you explain more? which bolts? the lower strut mount bolts? sorry just do not understand
#7
No I mean the 2 lower strut bolts. One of them is oval to aid in camber adjustment. You can try loosening them and pulling the wheel away from the strut. That will give you maximum positive camber, so you'll need to dial it in with the camber plates.
#10
Originally Posted by JSutter
That will give you maximum positive camber, so you'll need to dial it in with the camber plates.
#11
Originally Posted by JSutter
No I mean the 2 lower strut bolts. One of them is oval to aid in camber adjustment. You can try loosening them and pulling the wheel away from the strut. That will give you maximum positive camber, so you'll need to dial it in with the camber plates.
cardana which one is it and how much you askin?
Thread
Thread Starter
Forum
Replies
Last Post
dvcamp
6th Generation Maxima (2004-2008)
7
09-18-2015 10:17 AM