4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Few questions with front suspension

Thread Tools
 
Search this Thread
 
Old 11-29-2015, 09:59 AM
  #1  
Member
Thread Starter
 
jerrod99_se-l's Avatar
 
Join Date: Jun 2015
Posts: 249
Few questions with front suspension

Hello everyone! Should I just by new LCAs or rebuild my existing ones? What are the best outer tie rod ends to buy? My inners are good no play in them at all...I also bought some camber bolts today and will probably be installing them as well...the car is lowered...
jerrod99_se-l is offline  
Old 11-29-2015, 11:25 AM
  #2  
Member
 
Half Assed's Avatar
 
Join Date: Jul 2015
Location: The Sunshine State
Posts: 132
Rebuild with energy suspension polyurethane bushings.
Half Assed is offline  
Old 11-29-2015, 12:25 PM
  #3  
Member
Thread Starter
 
jerrod99_se-l's Avatar
 
Join Date: Jun 2015
Posts: 249
Originally Posted by Half Assed
Rebuild with energy suspension polyurethane bushings.
I went ahead and ordered some...mostly because of ease of installing new vs trying to rebuild them...lack of press and all that...also new outer tie rod end..(one was replaced within last few months)...and ordered new steering rack bushings... Sway bar and end link bushings were replaced over the summer... Should I replace subframe bushings as well?
jerrod99_se-l is offline  
Old 11-29-2015, 06:02 PM
  #4  
Junior Member
 
bloodthirstyemu's Avatar
 
Join Date: Jul 2014
Location: Mesa, AZ
Posts: 39
I ordered the subframe and the lca bushings together at importrp. they gave me discount since i ordered both. Might as well lol
bloodthirstyemu is offline  
Old 11-29-2015, 07:03 PM
  #5  
Member
Thread Starter
 
jerrod99_se-l's Avatar
 
Join Date: Jun 2015
Posts: 249
Originally Posted by bloodthirstyemu
I ordered the subframe and the lca bushings together at importrp. they gave me discount since i ordered both. Might as well lol
I'm gonna stick with stock bushings over ES mostly because its a daily..and I plan on passing the car down to my son as his first car..
jerrod99_se-l is offline  
Old 11-30-2015, 02:17 PM
  #6  
Member
Thread Starter
 
jerrod99_se-l's Avatar
 
Join Date: Jun 2015
Posts: 249
Originally Posted by jerrod99_se-l
I'm gonna stick with stock bushings over ES mostly because its a daily..and I plan on passing the car down to my son as his first car..
Little update: actually got outside between rain showers...my toe on the pass side was horrible...straightened that up and looked at the camber and I have a little negative camber which is expected with 18s and a drop..I'll slap on the new LCAs and tie rod end this weekend and report back
jerrod99_se-l is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
njmaxseltd
4th Generation Classifieds (1995-1999)
1
03-23-2016 12:28 PM
DennisMik
Garage and Workshop
6
12-19-2015 09:37 PM
GNCMaxima
7th Generation Maxima (2009-2015)
2
11-26-2015 07:49 AM
spazma7ik
8th Generation Maxima (2016-)
2
11-25-2015 07:38 PM
Grego214
7th Generation Maxima (2009-2015)
1
11-23-2015 07:35 PM



Quick Reply: Few questions with front suspension



All times are GMT -7. The time now is 08:07 PM.