Niche Veronas for my Gen 7
#1
Niche Veronas for my Gen 7
I know this is an old question but it remains a big deal to so many. What is the offset for Niche Veronas 20X9 front and 20X10 rear? I was told it was 35, 40. For some reason i am struggling with that answer. Your thoughts,concern, comment hell i'll even take sly remarks at this point!
#4
You should have no problem there. Even running a 285 rear will be fine with no rub. The only thing you need to figure out is which size tire you want to run up front on that 9 either a 245 or 255 will be fine. Just respect the dips in the road since you are lowered and getting closer to the fender now.
#6
35, 40 is good
those offsets will work. I'm running a 20x10 squared set with an offset of +40 on Megan Racing Coilovers no rubbing issues whatsoever. 245/35/20 with a 1 1/2 front and an 1 1/4 rear drop and no fender mods. Hope that helps? The lower the number of the offset the more it pushes the wheel out pass the fender.
#9
#12
Originally Posted by Devo
My max is still in the shop but I stopped by to take a quick pic.
[I]Im having it raised just a pinch
[I]Im having it raised just a pinch
#14
#15
#16
#18
Thread
Thread Starter
Forum
Replies
Last Post
James92SE
3rd Generation Maxima (1989-1994)
142
01-02-2024 09:23 AM
imported_Nismo_max
4th Generation Maxima (1995-1999)
2
09-21-2015 07:24 PM
ik95
7th Generation Maxima (2009-2015)
7
09-16-2015 08:11 PM