1/4 and 1/8 Mile Racing Talk about track times, launch techniques, strategies, etc. Check out the "Timeslips" subforum for posted times.No discussion of street racing will be tolerated.

0-60 times

Thread Tools
 
Search this Thread
 
Old Jun 15, 2003 | 09:36 AM
  #1  
ZeRo--MaX's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2003
Posts: 117
0-60 times

What is your best 0-60 time?

I got 7.13 0-100km/h..is that good for an auto with ghetto intake,y-pipe,2.5piping with universal muffler?
Old Jun 15, 2003 | 09:39 AM
  #2  
ZeRo--MaX's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2003
Posts: 117
I brake torqued at 1500rpm and then launch and left it on D.
Old Jun 15, 2003 | 10:14 AM
  #3  
BlueC's Avatar
wat
iTrader: (5)
 
Joined: Sep 2002
Posts: 3,623
Thats pretty good, you do any weight reduction at all?

That time you put up would probably equal to anywheres from 15.3-15.6 for the 1/4mile times,. That time you said equals to about 7.13 for a 0-62mph time.
Old Jun 15, 2003 | 10:17 AM
  #4  
ZeRo--MaX's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2003
Posts: 117
nope had me and my friend in the car and no weight reduction. but its all about the launching, sometimes i do 7.56 7.23 7.86
Old Jun 15, 2003 | 10:46 AM
  #5  
mayhemI30's Avatar
"I'm running with scissors!"
 
Joined: Feb 2003
Posts: 582
Originally posted by ZeRo--MaX
nope had me and my friend in the car and no weight reduction. but its all about the launching, sometimes i do 7.56 7.23 7.86
i've got 6.7,6.9,6.6 0-60 times in my i30 and 1/4 times of 15.1,14.8,and14.9. i did that on 18's 1/4 tank of gas. if you are wondering about mods look in sig.

those times of yours are saying that your car is quick for the mods that you have.
Old Jun 15, 2003 | 10:31 PM
  #6  
BadKarma99-4spd's Avatar
Senior Member
iTrader: (4)
 
Joined: Mar 2003
Posts: 1,113
From: Nashville, TN
how did you measure those times? i used my friends getech pro with y pipe and intake got a 6.8 0-60 and a 15.3 in the quarter. although i know there is a lot of controversy over their accuracy.
Old Jun 15, 2003 | 10:41 PM
  #7  
mayhemI30's Avatar
"I'm running with scissors!"
 
Joined: Feb 2003
Posts: 582
Originally posted by BadKarma99-4spd
how did you measure those times? i used my friends getech pro with y pipe and intake got a 6.8 0-60 and a 15.3 in the quarter. although i know there is a lot of controversy over their accuracy.
if you do an average of three runs it is 95% accurate
Old Jun 16, 2003 | 10:02 AM
  #8  
BadKarma99-4spd's Avatar
Senior Member
iTrader: (4)
 
Joined: Mar 2003
Posts: 1,113
From: Nashville, TN
mayhem did you have your vb and converter installed or did you do it?

i did mine and im having some slight slipping problems on occasion. it will drive fine for a long time until i go wot. then the slight slipping starts when i come to a full stop at a light.

have you had anything like this? my fluid is fine, im 99% positive i got the shift linkage right, could my gasket have a leak that is forcing fluid out of the tranny and back into the pan when i go wot?

thanks
Old Jun 16, 2003 | 01:41 PM
  #9  
mayhemI30's Avatar
"I'm running with scissors!"
 
Joined: Feb 2003
Posts: 582
Originally posted by BadKarma99-4spd
mayhem did you have your vb and converter installed or did you do it?

i did mine and im having some slight slipping problems on occasion. it will drive fine for a long time until i go wot. then the slight slipping starts when i come to a full stop at a light.

have you had anything like this? my fluid is fine, im 99% positive i got the shift linkage right, could my gasket have a leak that is forcing fluid out of the tranny and back into the pan when i go wot?

thanks
i had my vb and torque converter installed professionally. i also had my tranny completely rebuilt with stage three clutch packs, posi diff, and borg and warner bands. the guy that built my tranny also built race car trannys for modified class race cars, drag transmissions, and off road trucks.

so basically what i'm trying to say is that you should take it to someone with a good rep and a lot of experience and have them tell you what is wrong with it. if you cant figure it out have someone that can help you. it would prevent a lot of headache down the road
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sctludwig
3rd Generation Maxima (1989-1994)
8
Sep 1, 2022 01:32 PM
mvm062
Infiniti I30/I35
3
Nov 30, 2020 09:00 AM
kjlouis
4th Generation Maxima (1995-1999)
12
Oct 3, 2015 05:29 AM
trungg86
4th Generation Maxima (1995-1999)
7
Sep 4, 2015 04:58 AM
Wareagle92
8th Generation Maxima (2016-)
4
Sep 3, 2015 07:18 PM




All times are GMT -7. The time now is 09:06 AM.