I'll stay at KID then. lol

Going for 12s in two weeks. Gonna try to lighten up the car a bit.

 

good luck, btw here is something cheap you can try

get some old clogged bad precats which should be cheap since they're trash. Then gut and sleeve them and just get a safc2 to tune the car and a find someone with a ciper and bump the timing 2degree's. You should be able to do all this for around 250.00 or less

 

That's a good idea with sleeving a clogged cat. I'll start looking for some clogged ones. At that point, I might just want to go with the ebay headers though.

I'll be tuning with an safc, don't want to spend the 550 for uprev. lol

 

not sure how much ebay headers are for 6th gens, but you could get an safc for 100-150, get a wideband for 160-170 and those headers and ur the fastest NA 6th gen

 

It depends how much clogged cats go for. I put a WTB thread up. If they are really cheap, I can weld in a sleeve myself and have a really cheap setup that will appear stock.

If they cost like $100 or more, I won't waste my time and just get the ebay headers. The ebay headers are around $150.

 

OMG AMAZING~

 

if ebay headers make the same power as cattmans, i would def. get those!! those are cheapppp

also how much did your traps improve?

 

if someone wants a 100buck for some bad precats they need to be smacked

the price of metal has gone down big time and they won't get even close to that amount for them at a scrap yard

 

Thanks man!
Seriously lol.

I'm looking to spend about $30 max.

 

http://forums.maxima.org/6th-generat...at-shield.html

Jump on that deal man!!!!!

 

i have heard about who 6th gen maxima owner with NA Motor hit 13.1 @ 106 mph

 

That is a good deal!
Although, he is stating that he would need my stock manifolds first. My car is my daily, and I can't really have any downtime. Especially because the shipping would probably be about 2 weeks.
Any links or more info on the car?
That is some good mph.

EDIT: Found the thread on this car
http://forums.maxima.org/6th-generat...ml#post7246530

Here is one of his posts:
Sounds like he is spraying.

 

i was research on his post and i found this car have vq35hr cam swap.

 

Hey did you have full interior when you ran 13.3 or was it all there.??

 

Gutted trunk, no rear seat, no front seat.

 

how much does your car weigh? (if you weighed it at the track)

 

No idea lol

Replied to your PM by the way.

 

wat? i though you hit 13.3 sec on full weight on interior but its impressive! so what your car weight without full interior? so think about 2.5 or 3 inch pipe towards out the headlight and either make your on Velcoity stack will improve power as your et and trap mph will improve maybe be 12 sec?

 

Also, you are very hard to understand. lol

 

weight? 3200 lbs?

 

think about 2.5 or 3 inch pipe towards out the headlight and either make your on Velcoity stack will improve power as your et and trap mph will improve maybe be 12 sec?

 

I'll just stick to what I got, thanks though.

 

I should def gut my trunk and take some seats out.. My car weighed 3395 with me in it last time

 

I think its a no brainer. No need for the trunk carpet, back seats, and passenger seat at the track.

Free speed!

 

I'm lazy when it comes to that stuff lol

 

stock 04 maxima 3.5 se 6 speed weight is 3540 lbs!

 

Just do it! lol

Remember every 100lbs is approximately a tenth in the 1/4.

 

Please check it out:

http://forums.maxima.org/1-4-1-8-mil...ons-stock.html

 

how much for the headers? email me, trobuck07@live.com

 

he use stock header on during 12.99 @ 106.9 mph, i think Cattman header around 500-600 w/o y-pipe.

 

hey thats cool & fast !

 

yo... this car get some headers would be insane....

 

krazy i say buy the ebay headers n make a 3" Y-pipe... thank me later lol.. sell the Y to get back some $$$

 

they do

 

Thanks, but I'll just have fun with the car the way it is. I'm building a turbo bike that is super cheap and will haul ***!!!

Bikes are fun!

 

mmk i can dig... so close to history man

 

I'm fine with where im at. As far as I know, I'm the fastest all motor 6th gen. I'm happy with that.

 

Hopefully you come out to Maxus in Houston so I can see this clean, fast 6th gen in person.

 

I gussi couldlive with that lol

 

I just checked out the thread on it. There's a lot of cool stuff to do but it's too expensive for me.

I wish I could come though.