DJ Technischer

iTrader: (1)

http://forums.maxima.org/showthread.php?t=454906

DJ Technischer

iTrader: (1)

http://forums.maxima.org/showthread.php?t=454906

SurraTT

iTrader: (59)

they are 5lug.....

DJ Technischer

iTrader: (1)

looks more then 5 lugs , No way to fit them on?

DJ Technischer

iTrader: (1)

damn man this sucks , Would it be better just selling them on ebay ? Then trying to do the 5 lug conversion? the rim is 18 inches , And then the tires are low profile tires.

lowandslow88

u prolly wont get what your mom payed for em dude,but then again I dont know...Post a picture of the center cap and I'll find out what kind they are...

DJ Technischer

iTrader: (1)

i did its up in the middle of the pictures its like l l with a ring around the two lines.

Big_E-Dog

iTrader: (14)

they are 5 lug it just has 10 lug holes because of the 2 diff car 5 lug offsets, now there is a solution to this......5 lug comversion....check the stickies, although they look as they would rubb you might wanna also roll those fenders

DJ Technischer

iTrader: (1)

http://forums.maxima.org/showthread.php?t=454906

Mr. Blue Sky

iTrader: (1)

The 5 lug conversion isn't too hard to do. You will need to get parts from a 1991 maxima that had rear disc brakes(to make it easier) The sticky will guide you through the rest. It took me about 8 hours to do after I had gotten the parts, with little mods here and there.225 will definitely rub when you hit bumps in the road, or are carrying a heavy load. You will have to roll the insides of the fenders(front and back) in order to stop the rubbing. If they are 19" tires, you may not be able to lower the car to not make it look like a 4x4. .

DJ Technischer

iTrader: (1)

roger i dont see the write up how to do it.. It doesnt say what you need etc..

maximase86

iTrader: (24)

You will rub with those size tires with the 5-lug conversion. I'm running 215/35/18 with no rub.

S

DJ Technischer

iTrader: (1)

how bad will the rub be , is there any way to reduce that? and some one said roll the fenders There is nothing to roll..

DJ Technischer

iTrader: (1)

and how how much do you think i could sell them for ? the total cost brand new bought like 2 months ago , They where 1700 , And 2 of the rims are in the shop getting brand new of the same low profile tires. because i doubt i would be even able to do the 5 lug conversion..

DJ Technischer

iTrader: (1)

can any body tell me what kinda rims these are ? the emblem is 2 lines like this

l l

with a ring around them.

DJ Technischer

iTrader: (1)

http://forums.maxima.org/showthread.php?t=454906

max95q

iTrader: (10)

I would probably say sell them. Get some good money and buy some that will fit the 4 lug pattern. It seems like you could get a nice amount for these rims. Im thinking 1k would be a good sale for these rims. since they are coming with tires already mounted. Dont forget about shipping costs.

DJ Technischer

iTrader: (1)

Im sure it would take me a while to sell these rims , Because people dont want to pay much for shipping... Im sure it woiuld be 200 alone to ship these beioches.

cardana24

iTrader: (81)

what do you mean when you say the wheels are 19.5" s? Do you think the wheels are 19s and they have 18" tires? Why did you buy wheels that are not the same lug pattern as your car?

DJ Technischer

iTrader: (1)

My mother bought them, From a friend that just bought them that had to sell them because she dident have any money to pay for her car. My mom just bought them to surprise me. And i made a couple of typos they are 18 inch .

cardana24

iTrader: (81)

haahhahahahha....ok, no reply

max95q

iTrader: (10)

I tell ya if you did have the five lug with that pic you posted, they actually wouldve looked kinda nice. But its all good. There are better rims out there that will fit the ride anyway. Sell them jokers.

DJ Technischer

iTrader: (1)

Seriously , My moms friend a girl , Some one crashed into her , and she got Alot of money from taking the person to court , She bought all this rediclus things insted of saving the money and putting it into stocks , She bought a new eclipse , Whole cust sound system With coust Fiber glass enclosement , Got a peresence paint job with some tribal vnyals , Body kit , And got me to find her a cold air intake , And she also bought a huge *** tvs and all this crap , Needless to say she lost the money due to some thing i have no clue about , And they took her car witch she was making payments on , So she sold every thing that she put into the car. My mom went over there the other day and just bought the rims/tires...

lowandslow88

Cant u get adapters?To go 4 into 5 lug?

maximase86

iTrader: (24)

Yeah, it's called a suspension swap. Then 5 lug wheels bolt on easy as pie.

I've done said swap....mmmmmm lotsa fun.

S

DJ Technischer

iTrader: (1)

ive been searching online for that , And cant find any , And as for doing a conversion , from 4 to 5 , Im looking on this site , I dont see wany where how to complete a 4 to 5 lug conversion... yeah theres like 2 threads about it but it only goes on to explain a few problems they had , I dont see any where it tells you how to do it... with out having to grind things..

lowandslow88

i think the wheels would look pimp so find whatever u need and start swapping...hehehe

Mr. Blue Sky

iTrader: (1)

ahh, the wonderful memories

DJ: for the swap you will need the suspension and brakes from around a 1991 year GXE maxima(the ones with rear disc brakes) For the rear, they are pretty much a direct fit into the 2nd gen, the only thing you need to do is to remove the top boot(the one with the 3 screws on top. where you would put a rear strut bar if there was one for the car) from yours and put it on the 3rd gen struts. For the calipers, I had to adjust the parking brake line tension and route the brake line so it would connect correctly. The front is a bit trickier. I think sarin can help you with that one.

maximase86

iTrader: (24)

No don't use GXE parts. GXE's have drum brakes, it won't work. Use specifically all 89-91 SE or all 92-94 SE parts for the rear. 92-94 will require changing the parking brake cables.

S

DJ Technischer

iTrader: (1)

forget it im just going to sell them and get it over with , To much of a hassle for me at the moment..

cardana24

iTrader: (81)

PM, "Uncdood" , he is looking for some wheels...he may be interested.

DJ Technischer

iTrader: (1)

He dident like them ..

cardana24

iTrader: (81)

oh really? He mentioned to me he kinda liked them

DJ Technischer

iTrader: (1)

oh... Well im selling them for 800 now , they weigh close to 50 pounds , and i would be willing to drop them off , Where ever , aslong as its eather in va , pa , Or md.

Jason R

iTrader: (39)

carson-> <- me


you suck.