1st & 2nd Gen Pictures
Member
Joined: Jul 2010
Posts: 194
From: Hayward CA
hahah i would have all centerlines but dude only had 2.. $40 though! drove all the way to sacramento to get em. im most likely going to put the back rims on the front and buy some 15x8s or somthing with a fat lip for the back..
well if i had more money i would have done more than a RB20 but I am going to use this as a DD and I don't really need all that extra power. I got a good deal on the 20. I run the stock SMIC.
Member
Joined: Nov 2010
Posts: 292
From: Atlanta
My old Maxima
[quote=maximase86;4174803]My old Maxima. MOTM July 2005.
THAT IS DEFINITELY ONE OF THE NICEST ONES' I'VE SEEN OR HEARD. I'M ATTEMPTING A COLD AIR INTAKE FOR MY '87; CAN YOU HELP ME OUT, AS FAR AS WHAT I NEED TO DO INCLUDING WHAT SIZE TUBES ETC? ALSO IS YOUR CONE HIDDEN OR SOMETHING?
THAT IS DEFINITELY ONE OF THE NICEST ONES' I'VE SEEN OR HEARD. I'M ATTEMPTING A COLD AIR INTAKE FOR MY '87; CAN YOU HELP ME OUT, AS FAR AS WHAT I NEED TO DO INCLUDING WHAT SIZE TUBES ETC? ALSO IS YOUR CONE HIDDEN OR SOMETHING?
Nice shoehorned motor! I just ran across a really clean 82 this week.....I'm wondering if I can get it for my 18 yr old.....She'll hate me for that......putting in a 28 yr old car! LOL.....You can't hard those old cars......they're solid! I wouldn't really worry if she torn up a older car.....I'll be pissed if I spent $5000 on a used car and she tears it up/totals it in less than 2 yrs..... My first car was 10 yrs old when I got....1974 Toyota Celica ST.......
Junior Member
Joined: Jun 2010
Posts: 72
kman87 are you looking to sell your maxima, if so email me at jetdogcraven@yahoo.com thanks. gerald
Member
Joined: Nov 2010
Posts: 292
From: Atlanta
those will look soooo sick
Junior Member
Joined: Feb 2010
Posts: 32
From: SF Bay
Has anyone done any test fitting to see what the best wheel size and offset are to get the widest tires on the 1st gen?
I'm thinking a 15x7 or 15x8 with a +15 or +20 offset to keep the tires off the fender.
I know the 15x6 0 offset Z car wheels will put the tires too far out and rub but there's sooo much room left under the fenders, it's a huge waste of space.
Thoughts?
I'm thinking a 15x7 or 15x8 with a +15 or +20 offset to keep the tires off the fender.
I know the 15x6 0 offset Z car wheels will put the tires too far out and rub but there's sooo much room left under the fenders, it's a huge waste of space.
Thoughts?
Last edited by lww; Jan 24, 2011 at 09:50 PM.
Has anyone done any test fitting to see what the best wheel size and offset are to get the widest tires on the 1st gen?
I'm thinking a 15x7 or 15x8 with a +15 or +20 offset to keep the tires off the fender.
I know the 15x6 0 offset Z car wheels will put the tires too far out and rub but there's sooo much room left under the fenders, it's a huge waste of space.
Thoughts?
I'm thinking a 15x7 or 15x8 with a +15 or +20 offset to keep the tires off the fender.
I know the 15x6 0 offset Z car wheels will put the tires too far out and rub but there's sooo much room left under the fenders, it's a huge waste of space.
Thoughts?
Newbie - Just Registered
Joined: Feb 2011
Posts: 1
From: Giddings, Tx
New here.
83'
Since there are no suspension setups without retrofitting for this car. I'm just gonna bag it. Once i finish my bagged 88' GMC 1 ton then it's the Datsun
Hopefully get it sittin like HighFiveMaxi!'s but lower. Maybe get some adapters for my Panasport UL's to fit off my FB
83'
Since there are no suspension setups without retrofitting for this car. I'm just gonna bag it. Once i finish my bagged 88' GMC 1 ton then it's the Datsun
Hopefully get it sittin like HighFiveMaxi!'s but lower. Maybe get some adapters for my Panasport UL's to fit off my FB
Last edited by MelloYello; Feb 10, 2011 at 08:22 PM.
Member
Joined: Nov 2008
Posts: 176
From: TAMPA/GREENSBORO
