has anyone done this? I seen people swap the 240 front subframes to the chassis, but cant find any info on 240/z32na rear subframes in a 1g maxima. I have a spare 4.9 welded r200 id like to put in the car, thanks.

 

is it a long nose or short nose R200?

 

its a z32 case with open welded guts with a xterra 4.9. its not a r230 if that what u are asking....

 

ok short nose R200, shouldn't be to hard with the use of these, just wanted to be sure it wasn't a long nose since you would need the trailing arm style rear sub frame like the S12,z31 but yea thought about it and was like duh don't think a long nose would ever be 4.9.....

http://responsetype.com/shop/gazelle...me-swap-kit-2/

 

You rock man thanks for the link!

 

can someone confirm the maxima rear and the s30 rear subframe are the same? I know 280 r200 swaps go right in and can just add all the s13 suspension to the 280z including knuckles/hubs. trying to see if it's the same. I have the maxima measurements but no the s30's subframe.

 

I done something close to that...