1st-3rd Generations Classifieds (1981-1994) No superchargers in here, but you will find other useful parts and accessories.

CAN-Other 1992 Maxima SE parts car

Old Dec 20, 2010 | 09:36 AM
  #161  
DMad8724's Avatar
Senior Member
iTrader: (4)
 
Joined: Nov 2003
Posts: 2,078
From: Midwest
http://www.a1electric.com/install/maxima/02.htm

you have to have the window most of the way down and its 2 bolts i think..
Old Dec 20, 2010 | 09:38 AM
  #162  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by DMad8724
http://www.a1electric.com/install/maxima/02.htm

you have to have the window most of the way down and its 2 bolts i think..
Perfect man. Thanks alot
Old Dec 20, 2010 | 11:02 AM
  #163  
Tool's Avatar
Junior Member
iTrader: (1)
 
Joined: Sep 2010
Posts: 55
From: Eau Claire, WI
any word on the injectors?
Old Dec 20, 2010 | 10:34 PM
  #164  
maximo018's Avatar
Senior Member
iTrader: (6)
 
Joined: Jan 2007
Posts: 2,260
From: Houston/Missouri City
Who did you send it out through? Just want to know who took look out for (fedex, ups or usps)
Old Dec 21, 2010 | 04:18 AM
  #165  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by Tool
any word on the injectors?
ok, I have 3 of them out. Did you want the 3? or would you like to wait for me to get the rear 3 off?
Old Dec 21, 2010 | 04:20 AM
  #166  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by maximo018
Who did you send it out through? Just want to know who took look out for (fedex, ups or usps)
Canada post. I never ship via UPS cause the cost is literally double what the Can post offers
Old Dec 21, 2010 | 07:03 AM
  #167  
Maxima Skinner's Avatar
Newbie - Just Registered
 
Joined: Jan 2009
Posts: 3
From: League City, TX
How does the ABS hydraulic module look? I need some parts to rebuild mine.
Old Dec 21, 2010 | 07:34 AM
  #168  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by Maxima Skinner
How does the ABS hydraulic module look? I need some parts to rebuild mine.
Are you referring to the "ABS Control Module (Computer) "
or
ABS Actuator Assembly
Old Dec 21, 2010 | 10:54 AM
  #169  
Maxima Skinner's Avatar
Newbie - Just Registered
 
Joined: Jan 2009
Posts: 3
From: League City, TX
That would be the ABS Actuator Assembly.
Old Dec 21, 2010 | 11:06 AM
  #170  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by Maxima Skinner
That would be the ABS Actuator Assembly.
Everything under the engine bay is relatively clean. Would you like the actuator?

$25 + shipping
Old Dec 21, 2010 | 01:34 PM
  #171  
maximo018's Avatar
Senior Member
iTrader: (6)
 
Joined: Jan 2007
Posts: 2,260
From: Houston/Missouri City
ah hah. Idk the car had abs. How much for the wheel sensors for the front?
Old Dec 22, 2010 | 05:43 AM
  #172  
maxima94ever's Avatar
Member
iTrader: (3)
 
Joined: May 2005
Posts: 165
By the way do you still have the stering wheel airbag coil, its a little coil under the steering cover, if yes how much
Old Dec 22, 2010 | 06:47 AM
  #173  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by maxima94ever
By the way do you still have the stering wheel airbag coil, its a little coil under the steering cover, if yes how much
i'll check it out..i'm sure it's there, i never sold it lol. $15 shipped? Depending on how big it is
Old Dec 22, 2010 | 06:48 AM
  #174  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by maximo018
ah hah. Idk the car had abs. How much for the wheel sensors for the front?
Can't take the wheels off the car till it's ready to go. It neds to stay on 4 tires where I am or i'll get a fine. I'm not really allowed to even be parting it out, but i'm takin a hit for the .org :P
Old Dec 22, 2010 | 06:05 PM
  #175  
Tool's Avatar
Junior Member
iTrader: (1)
 
Joined: Sep 2010
Posts: 55
From: Eau Claire, WI
Originally Posted by Bassbreaker
ok, I have 3 of them out. Did you want the 3? or would you like to wait for me to get the rear 3 off?
If possible, I would like to buy any/all of them that are in spec (10-14 ohms). I need 4 for sure, a couple spare (if they are good) would be nice to have.
Old Dec 23, 2010 | 08:40 PM
  #176  
maximo018's Avatar
Senior Member
iTrader: (6)
 
Joined: Jan 2007
Posts: 2,260
From: Houston/Missouri City
Originally Posted by Bassbreaker
Can't take the wheels off the car till it's ready to go. It neds to stay on 4 tires where I am or i'll get a fine. I'm not really allowed to even be parting it out, but i'm takin a hit for the .org :P
No the part I meant to ask about is the rubber insulated cable that runs to the sensor. Theres a picture on rockauto's website. It looks to be held on with 3 screws and pigtail at other end of sensor. Looks like another brake line at first. You just take the wheels off to get them and put the wheels back on when done. If anyone ask your just changing brake pads.
Old Dec 24, 2010 | 05:03 AM
  #177  
maxima94ever's Avatar
Member
iTrader: (3)
 
Joined: May 2005
Posts: 165
Originally Posted by Bassbreaker
i'll check it out..i'm sure it's there, i never sold it lol. $15 shipped? Depending on how big it is
ok let me know.:
Old Dec 25, 2010 | 01:46 AM
  #178  
DMad8724's Avatar
Senior Member
iTrader: (4)
 
Joined: Nov 2003
Posts: 2,078
From: Midwest


seat-bottom-removal
Old Dec 27, 2010 | 09:31 AM
  #179  
Augustus Maximus's Avatar
Senior Member
iTrader: (6)
 
Joined: May 2009
Posts: 1,004
From: Connecticut
What condition are the rear calipers in?
Old Dec 28, 2010 | 05:32 AM
  #180  
maxima94ever's Avatar
Member
iTrader: (3)
 
Joined: May 2005
Posts: 165
window regulator n motor

Bassbreaker what is the status on the regulator n motor, been waiting for an answer.
Old Dec 28, 2010 | 02:43 PM
  #181  
maximo018's Avatar
Senior Member
iTrader: (6)
 
Joined: Jan 2007
Posts: 2,260
From: Houston/Missouri City
i received the master switch and housing today. The housing is actually for the lower im. Thermo housing hooks up to water pipe in the valley, the other ends are to the heater valve and lower radiator hose.(Back of the motor right over the trans) Thanks! Don't worry about it I took mine off last night and I'm going to seal up the leak. At least I have an extra housing.
Old Dec 30, 2010 | 04:20 AM
  #182  
maxima94ever's Avatar
Member
iTrader: (3)
 
Joined: May 2005
Posts: 165
Still waiting for answer, from bassbreaker.
Old Jan 3, 2011 | 09:13 AM
  #183  
Augustus Maximus's Avatar
Senior Member
iTrader: (6)
 
Joined: May 2009
Posts: 1,004
From: Connecticut
Anybody here?
Old Jan 3, 2011 | 03:27 PM
  #184  
maxima94ever's Avatar
Member
iTrader: (3)
 
Joined: May 2005
Posts: 165
He's on holiday vacation
Old Jan 4, 2011 | 04:35 AM
  #185  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
OK everyone, I appologize for the delay in my responding. Yes I was on vacation but I didn't go anywhere. My problem was having to be everywhere at the same time for the past 10 days. The HD on my laptop crashed too Thats not a good thing. But now i'm back to work so i have computer access all the time.

Anyone who is still looking for parts can contact me if they so choose. I hope no one thought I was jacking them or anything, it's a hard time of year as I know most of you probably already realize.

Happy New year to all
Old Jan 4, 2011 | 05:19 AM
  #186  
maxima94ever's Avatar
Member
iTrader: (3)
 
Joined: May 2005
Posts: 165
HAPPY NEW YEAR, Bass
Old Jan 17, 2011 | 05:26 PM
  #187  
devious_se's Avatar
Newbie - Just Registered
 
Joined: Jul 2010
Posts: 4
front hubs shipped to 93221, just hubs. and they are five lug right....sry i have a g20 these are for my sister.
pm me please im not on here much.

thanks
Old Jan 18, 2011 | 11:29 AM
  #188  
DMad8724's Avatar
Senior Member
iTrader: (4)
 
Joined: Nov 2003
Posts: 2,078
From: Midwest
seat bottom?
Old Jan 18, 2011 | 06:43 PM
  #189  
twomissanman's Avatar
Newbie - Just Registered
 
Joined: Jan 2004
Posts: 7
How much for the rear calipers?
Old Jan 19, 2011 | 04:03 AM
  #190  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
sorry for the lack of responses org'ers but i've fallen into a hard time these past couple of weeks. Rear calipers were called by another member (Agustus) I havent forgotten about the seat bottom but i've also havent had a chance to get out at it. Please be patient people.
Old Jan 19, 2011 | 04:21 AM
  #191  
DMad8724's Avatar
Senior Member
iTrader: (4)
 
Joined: Nov 2003
Posts: 2,078
From: Midwest
interested in the main ACC unit with pigtails if you still have that as well and its in good condition, that and right front windshield defroster vent with sensor...price shipped for that + seat botton
Old Jan 19, 2011 | 03:34 PM
  #192  
Tool's Avatar
Junior Member
iTrader: (1)
 
Joined: Sep 2010
Posts: 55
From: Eau Claire, WI
any word on the 6 injectors?
Old Jan 20, 2011 | 04:29 AM
  #193  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by DMad8724
interested in the main ACC unit with pigtails if you still have that as well and its in good condition, that and right front windshield defroster vent with sensor...price shipped for that + seat botton
Which "unit" in the AC are you referring to?
Old Jan 20, 2011 | 04:31 AM
  #194  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by Tool
any word on the 6 injectors?
Give me till the weekend my friend. Been a rough few weeks. But things are looking better now.
Old Jan 20, 2011 | 10:20 AM
  #195  
DMad8724's Avatar
Senior Member
iTrader: (4)
 
Joined: Nov 2003
Posts: 2,078
From: Midwest
Originally Posted by Bassbreaker
Which "unit" in the AC are you referring to?
the one in the dash with the buttons and display for the AC/heat with a couple inches of harness and plug from the back
Old Jan 20, 2011 | 10:23 AM
  #196  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by DMad8724
the one in the dash with the buttons and display for the AC/heat with a couple inches of harness and plug from the back
ohh ok...thats already out...no problem my friend...

and by right front vent, are you referring to when you are in the car or looking in from outside the car
Old Jan 20, 2011 | 01:55 PM
  #197  
Augustus Maximus's Avatar
Senior Member
iTrader: (6)
 
Joined: May 2009
Posts: 1,004
From: Connecticut
Let me get the driver side mirror...if it's still available.

Last edited by Augustus Maximus; Jan 20, 2011 at 02:01 PM.
Old Jan 20, 2011 | 02:46 PM
  #198  
BklynsmoeVE's Avatar
Senior Member
iTrader: (1)
 
Joined: Dec 2009
Posts: 313
From: Brooklyn, NY
Hey wuts up do you happen to have any adjustable lateral links? I'm in NY if ur willing to ship
Old Jan 21, 2011 | 05:02 AM
  #199  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by Augustus Maximus
Let me get the driver side mirror...if it's still available.
Yes it is still available. It will be $25 + shipping and I can pull it tonight if you want it
Old Jan 21, 2011 | 05:05 AM
  #200  
Bassbreaker's Avatar
Thread Starter
Senior Member
iTrader: (8)
 
Joined: Sep 2008
Posts: 1,369
From: St. John's, NL, Canada
Originally Posted by BklynsmoeVE
Hey wuts up do you happen to have any adjustable lateral links? I'm in NY if ur willing to ship
i'm not hauling off any suspension parts as the car will have to be towed eventually...and in the area i'm in, it still has to look somewhat NOT scrapped lol. So i'm really only focusing on interior and motor parts. As well as a few exterior accessories like mirrors and lights.

Unless they are easy to get off, and won't affect the towing job then it may be able to be done

Thread Tools
Search this Thread

All times are GMT -7. The time now is 02:47 AM.