1st-3rd Generations Classifieds (1981-1994) No superchargers in here, but you will find other useful parts and accessories.

CAN-Vancouver wtb strut bar

Thread Tools
 
Search this Thread
 
Old Aug 31, 2014 | 11:52 AM
  #1  
LLkoolJJ's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: May 2014
Posts: 49
wtb strut bar

I found a couple on ebay but they are advertised as sohc only. I have the ve so i dont think those strut bars would work...if not im looking to buy one asap.
Old Sep 2, 2014 | 02:54 PM
  #2  
James92SE's Avatar
2 VE's are better than one!
iTrader: (31)
 
Joined: Sep 2000
Posts: 7,362
From: Dallas
Originally Posted by LLkoolJJ
I found a couple on ebay but they are advertised as sohc only. I have the ve so i dont think those strut bars would work...if not im looking to buy one asap.
You can buy one for a 2000-2003 5th gen, most of them fit the VE.

I know for certain the Otto Racing 5th gen bar fits, as I personally have one. Not sure if they still make them, but the Otto bar is just a clone of the Stillen bar (or vice versa perhaps), so the Stillen bar should fit too. Again though not sure if those are still around.

If you're looking at generic cheap eBay ones, any 5th gen bar that angles up in the center should fit
Old Sep 3, 2014 | 08:29 AM
  #3  
londonflu's Avatar
Member
 
Joined: Nov 2010
Posts: 292
From: Atlanta
Originally Posted by LLkoolJJ
I found a couple on ebay but they are advertised as sohc only. I have the ve so i dont think those strut bars would work...if not im looking to buy one asap.
Why wouldn't the GXE strut bar fit? the struts are the same.
Old Sep 3, 2014 | 10:23 AM
  #4  
James92SE's Avatar
2 VE's are better than one!
iTrader: (31)
 
Joined: Sep 2000
Posts: 7,362
From: Dallas
Originally Posted by londonflu
Why wouldn't the GXE strut bar fit? the struts are the same.
The VE intake manifold sits up much higher than the VG. GXE struts bars are typically just solid straight bars connecting the strut towers, which does not work with the VE because it won't clear the intake manifold. That's why the VE strut bar needs to be shaped like the top of a stop sign
Old Sep 3, 2014 | 10:26 AM
  #5  
londonflu's Avatar
Member
 
Joined: Nov 2010
Posts: 292
From: Atlanta
Originally Posted by James92SE
The VE intake manifold sits up much higher than the VG. GXE struts bars are typically just solid straight bars connecting the strut towers, which does not work with the VE because it won't clear the intake manifold. That's why the VE strut bar needs to be shaped like the top of a stop sign
AHHA! Thanks for clearing that up James m8.
Old Sep 5, 2014 | 09:13 PM
  #6  
LLkoolJJ's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: May 2014
Posts: 49
Right on thanks james

Ive been hella busy with work so havent been able to search too much. I might buy a custom maxima fstb off th3shuck from the 5th gen classifieds. Any idea how well those bars hold up?
Old Sep 5, 2014 | 09:39 PM
  #7  
londonflu's Avatar
Member
 
Joined: Nov 2010
Posts: 292
From: Atlanta
Originally Posted by LLkoolJJ
Right on thanks james

Ive been hella busy with work so havent been able to search too much. I might buy a custom maxima fstb off th3shuck from the 5th gen classifieds. Any idea how well those bars hold up?
LL, I just ordered one the other day from here, I offered him $43:

http://www.ebay.com/itm/111304601535...%3AMEBIDX%3AIT
Old Sep 9, 2014 | 10:42 PM
  #8  
LLkoolJJ's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: May 2014
Posts: 49
Originally Posted by londonflu

LL, I just ordered one the other day from here, I offered him $43:

http://www.ebay.com/itm/111304601535...%3AMEBIDX%3AIT
Hey have you recieved your fstb yet? I was wondering how it worked out for you
Old Sep 9, 2014 | 10:56 PM
  #9  
londonflu's Avatar
Member
 
Joined: Nov 2010
Posts: 292
From: Atlanta
Originally Posted by LLkoolJJ
Hey have you recieved your fstb yet? I was wondering how it worked out for you
Not yet it's scheduled to be here tomorrow though, I keep you posted LL.
Old Sep 10, 2014 | 12:16 PM
  #10  
londonflu's Avatar
Member
 
Joined: Nov 2010
Posts: 292
From: Atlanta
Originally Posted by LLkoolJJ
Hey have you recieved your fstb yet? I was wondering how it worked out for you
Test fitted it today, holes match-up & it clears the intake manifold, it's a go. 5th gen strut tower bar fits our 3rd gens.

Thanks again James92SE!

Last edited by londonflu; Sep 10, 2014 at 12:18 PM.
Old Sep 13, 2014 | 08:37 PM
  #11  
LLkoolJJ's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: May 2014
Posts: 49
Originally Posted by londonflu

Test fitted it today, holes match-up & it clears the intake manifold, it's a go. 5th gen strut tower bar fits our 3rd gens.
Did u offer 43 shipped??..or how much did u pay for shipping?
Old Sep 13, 2014 | 09:32 PM
  #12  
londonflu's Avatar
Member
 
Joined: Nov 2010
Posts: 292
From: Atlanta
Originally Posted by LLkoolJJ
Did u offer 43 shipped??..or how much did u pay for shipping?
Shipping is free! Geeze just click on the bleedin' link, yo!
Old Sep 13, 2014 | 10:06 PM
  #13  
LLkoolJJ's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: May 2014
Posts: 49
Originally Posted by londonflu

Shipping is free! Geeze just click on the bleedin' link, yo!
Weird-its saying $50 for shipping to canada..owell thanks anway
Old Sep 16, 2014 | 10:02 AM
  #14  
ac max 92's Avatar
Senior Member
iTrader: (13)
 
Joined: Oct 2010
Posts: 1,712
From: Ont. Canada
Originally Posted by londonflu
Shipping is free! Geeze just click on the bleedin' link, yo!
Shipping may be free for the U.S
Old Sep 16, 2014 | 10:05 AM
  #15  
ac max 92's Avatar
Senior Member
iTrader: (13)
 
Joined: Oct 2010
Posts: 1,712
From: Ont. Canada
Originally Posted by LLkoolJJ
Weird-its saying $50 for shipping to canada..owell thanks anway
I can't remember the name of the place i got mine but they were in north york i believe. If im not mistaken they had an ad on kijiji. Try going on kijiji and do a search on there and you may find it otherwise im sure there's someone local on kijiji that can get it for you.
Old Sep 16, 2014 | 11:23 AM
  #16  
londonflu's Avatar
Member
 
Joined: Nov 2010
Posts: 292
From: Atlanta
Originally Posted by LLkoolJJ
Weird-its saying $50 for shipping to canada..owell thanks anway
Try here: http://www.amazon.com/gp/offer-listi...02BMNXNP8SY9Q9

Should've gotten mine from there, forgot to check, could've saved $10

Last edited by londonflu; Sep 16, 2014 at 11:28 AM.
Old Sep 16, 2014 | 05:45 PM
  #17  
LLkoolJJ's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: May 2014
Posts: 49
Originally Posted by londonflu

Try here: http://www.amazon.com/gp/offer-listi...02BMNXNP8SY9Q9

Should've gotten mine from there, forgot to check, could've saved $10
Hey london--i looked and found the first few sellers wouldnt ship to bc..checked andysautosport and that one they wanted 75+.

Went back to amazon and found someone willing to ship to canada. Under 50 shipped. Thanks for the lead london.

...hopefully its not as cheap as im expecting it to be. lol
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pnjboyzz
6th Generation Maxima (2004-2008)
2
Nov 16, 2015 12:27 PM
MaxLvr21
5th Generation Maxima (2000-2003)
14
Oct 17, 2015 12:11 PM
maxima-junky
4th Generation Classifieds (1995-1999)
1
Oct 7, 2015 06:13 PM
JakeOfAllTrades
7th Generation Maxima (2009-2015)
1
Sep 30, 2015 03:16 PM




All times are GMT -7. The time now is 08:44 PM.