CAN-Toronto 93' GXE non-ABS rear Brembo blank rotors and pads, OEM oil filter, fuel pump
#1
89-90' GXE non-ABS rear Brembo rotors, QCP ball joint, OEM oil filter, fuel pump
Still have the brand spanking new Brembo blanks for the rear wheels which I bought and never installed in my long gone '93 Maxima GXE non-ABS. US$30 (if shipping to the US) or CDN$50 for both. Brembo P/N 25148 Niss P/N 43206 88E03. Tire Rack sold them for 93 Max, but now I look them up and they show under 89-90 model years. Confirm they fit your Maxima!
Also have an OEM oil filter. CDN$5.
One QCP front lower ball joint for 93 Max, greasable with a nipple. CDN$10.
Good used fuel pump from my Maxima. Was replaced but found not to be the problem, CDN$50.
All prices plus ship.
Also have an OEM oil filter. CDN$5.
One QCP front lower ball joint for 93 Max, greasable with a nipple. CDN$10.
Good used fuel pump from my Maxima. Was replaced but found not to be the problem, CDN$50.
All prices plus ship.
Last edited by Tarzan; 05-08-2017 at 09:38 AM.
#3
I am in Brampton. If you are interested in the rotors, let me get you the Brembo P/N first, then you check compatibility. I was told there could be at least 2 different kinds of rotors on the 3d gen Maxima, and they changed between 92 to 93 or from 93 to 94, can't remember which year exactly.
#4
I have a 92. I'm located just 30 minutes north of t.o. I currently have cross drilled rotors all around but I may still be interested. Let me know if you have any other interesting 3rd gen parts kicking around and maybe we can meet up sometime. It would be nice to meet another local member too. Pm me the part #
#5
The Brembo part# is 25148, Nissan 43206 88E03
Sounds like this is for 1989-1990 models only, so may not fit your 92.
Tire Rack sold them for '93 and the front rotors I got in the same purchase fit my 93, go figure.
Also found one ball joint for the front, greasable type with a nipple (not sealed like OEM).
Sounds like this is for 1989-1990 models only, so may not fit your 92.
Tire Rack sold them for '93 and the front rotors I got in the same purchase fit my 93, go figure.
Also found one ball joint for the front, greasable type with a nipple (not sealed like OEM).
Thread
Thread Starter
Forum
Replies
Last Post
Redline
6th Generation Maxima (2004-2008)
61
02-25-2006 02:45 PM
Hurley42385
3rd Generation Maxima (1989-1994)
14
08-04-2003 08:10 PM