3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

I need replacement for ECU maxima 89

Thread Tools
 
Search this Thread
 
Old Jul 14, 2002 | 12:06 AM
  #1  
davidmartin's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Jul 2002
Posts: 2
I need replacement for ECU maxima 89

I need to buy a replace for my ECU maxima 89 automatic transmission, manual air conditioner VG30E engine.

This got water from the broken heater core, all simptoms bring me to some pins connections of the harness of ECU. I opened it and found water inside. could my ECU get damged for this water?
I´m a electronic Engineer and I opened my ECU to try to find the problem. I found a bad resistor and I changed it, but I still having problems with my car for example:

The A/C dosent work (I checked it and its work good)

I think that my ECU is partially bad so I need a new one (ECU)or if someone knows or have the electrical schematic of ECU. (for a maxima 89 automatic transmission, manual air conditioner VG30E engine.)

Please let me know at my email or let me a post here Thanks you
Old Jul 14, 2002 | 12:17 AM
  #2  
Nismo87SE's Avatar
Senior Member
 
Joined: Aug 2000
Posts: 2,806
Re: I need replacement for ECU maxima 89

Try here www.car-part.com. Any ECU from an automatic maxima should work in your car from the 89-91 years.
Originally posted by davidmartin
I need to buy a replace for my ECU maxima 89 autoimatic transmission, manual air conditioner VG30E engine.

This got water from a broken heater core, all simptoms bring me to some pins connections of the harness of ECU. I opened it and found water inside. I changed a resistor, so I need a electrical schematic of ECU.
Old Jul 14, 2002 | 09:12 AM
  #3  
i_canoe's Avatar
Member
 
Joined: Jun 2002
Posts: 38
Re: I need replacement for ECU maxima 89

Originally posted by davidmartin
I need to buy a replace for my ECU maxima 89 automatic transmission, manual air conditioner VG30E engine.

This got water from the broken heater core, all simptoms bring me to some pins connections of the harness of ECU. I opened it and found water inside. could my ECU get damged for this water?
I´m a electronic Engineer and I opened my ECU to try to find the problem. I found a bad resistor and I changed it, but I still having problems with my car for example:

The A/C dosent work (I checked it and its work good)

I think that my ECU is partially bad so I need a new one (ECU)or if someone knows or have the electrical schematic of ECU. (for a maxima 89 automatic transmission, manual air conditioner VG30E engine.)

Please let me know at my email or let me a post here Thanks you
I spilled a quart coffee on my kid's 85's ECU. The engine would flood, never started after that. Took the ECU apart, washed it with bottled water. Then used a pencil eracer to clean the edge connectors on the ECU. Plugged it back together, never had a problem after that. As last chance effort it's not bad and should work as long as none of the ECU 's componets have let their smoke out.
All the Best
Old Jul 15, 2002 | 10:17 PM
  #4  
davidmartin's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Jul 2002
Posts: 2
thanks nismo87se

Tomorrow I´m going to pick a ECU, it costs $ 100 against $800 at the dealer, then I´ll tell you what happened

thanks again, David
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Maxilano
7th Generation Maxima (2009-2015)
1
Aug 31, 2015 07:33 PM
Mrbizness1
6th Generation Maxima (2004-2008)
4
Aug 18, 2015 08:43 PM
YourLocalAsian
6th Generation Maxima (2004-2008)
3
Aug 17, 2015 02:33 PM
District
5th Generation Maxima (2000-2003)
8
Aug 15, 2015 08:23 PM
Tanvirkamal
7th Generation Maxima (2009-2015)
4
Aug 5, 2015 01:32 AM




All times are GMT -7. The time now is 11:15 PM.