3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

Window Arm Gone

Thread Tools
 
Search this Thread
 
Old 12-02-2002 | 10:36 PM
  #1  
BC Maxima Man's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2002
Posts: 21
Window Arm Gone

o-tay well my left rear window arm has gone and i was wondering how much to replace it and were are some insructions on how to remove-install one?


ps im a canadian boy so i need canadain prices

thx
Old 12-02-2002 | 10:45 PM
  #2  
«§»Craig B«§»'s Avatar
Supporting Maxima.org Member
iTrader: (5)
 
Joined: Aug 2000
Posts: 3,786
sounds like you're talking about the regulator

very common problem

http://www.courtesyparts.com for the part
http://www.prism.gatech.edu/~gte671n/mymax.html for replacement instructions

this has been talked about many times before so search for more info if you need it

good luck
Old 12-04-2002 | 06:14 PM
  #3  
jonnymax3's Avatar
Junior Member
 
Joined: Oct 2002
Posts: 28
If you hit the switch and you hear the motor going and you don't hear a lot of grinding and hesitation in the motor it may be able to be fixed. I had my passanger side break. it went down but did not come back up. your symptoms may not be the same. take the regulator out and the window. Drill a hole in the metal bracket on the window near where the cable on the regulator is. take a small nut and bolt and put it through the hole so you can use it to clamp the cable to. if you have worked on bicycles you will recall the concept on the brake cable and the shifter. I am not saying that this is your problem. this only will help if the cable is slipping through the bracket on the window. The regulator also needs to be in working condition.

hope this helps.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RealityCheck
4th Generation Maxima (1995-1999)
7
10-02-2015 07:34 PM
DC_Juggernaut
7th Generation Maxima (2009-2015)
4
09-28-2015 05:07 PM
lrb6805
4th Generation Maxima (1995-1999)
0
09-24-2015 06:03 PM




All times are GMT -7. The time now is 01:07 PM.