3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

Bushings, alighnment or what??

Thread Tools
 
Search this Thread
 
Old 04-24-2003, 11:31 AM
  #1  
Senior Member
Thread Starter
iTrader: (1)
 
Gjohnson's Avatar
 
Join Date: Dec 2002
Location: Broken Arrow, OK
Posts: 1,544
Bushings, alighnment or what??

Ok, here's the new problem. I had my car aligned in December, but it still pulls to the right. And lately when ever I've been driving down the road the car will pull to the right, but if I get on it or put the torque to work the car will start to pull to the left. This is really annoying and slightly dangerous. And you can actually feel the steering wheel tighten and loosen, which makes me adjust how I am steering. I hate this crap and if I'm not carefull I'll be swerving in and out of my lane. Does anyone have any ideas what this could be? I know the guy that had the car before me ran over something on the passenger's side to the car, because it broke the foglight and jacked up the strut tower. That's another thing, when ever I bought the car the first thing I did was have the struts replaced. The car drives a million times better, but when ever I hit a series of bumps I can still hear the notorious front passenger wheel somewhat dribble. Any ideas?
Gjohnson is offline  
Old 04-24-2003, 11:53 AM
  #2  
Ad·min·is·tra·tor
iTrader: (14)
 
DanNY's Avatar
 
Join Date: Aug 2000
Posts: 17,725
control arm bushings?
tie rods?
ball joints?
DanNY is offline  
Old 04-24-2003, 12:40 PM
  #3  
Senior Member
Thread Starter
iTrader: (1)
 
Gjohnson's Avatar
 
Join Date: Dec 2002
Location: Broken Arrow, OK
Posts: 1,544
Originally posted by DanNY
control arm bushings?
tie rods?
ball joints?
So basiclly I need to take it to the shop and have it checked out? Does anyone know how much these repairs usually cost? So, I will not get screwed.

Matt93SE, Know any good places here in town, to take it.
Gjohnson is offline  
Old 04-24-2003, 09:26 PM
  #4  
STFU n00b!
iTrader: (44)
 
Matt93SE's Avatar
 
Join Date: Aug 2000
Location: Houston
Posts: 18,095
bring it by the Blehmco garage. It'll be open all day Saturday. stop by anytime between 10am and 7pm and I'll have the owner take a look.

otherwise, take it by the Sears on 21st and Yale or Dino's tire on admiral. they're the ones I deal with most of the time and even Sears is good about finding weird stuff that I miss.
Matt93SE is offline  
Old 04-24-2003, 09:31 PM
  #5  
Senior Member
Thread Starter
iTrader: (1)
 
Gjohnson's Avatar
 
Join Date: Dec 2002
Location: Broken Arrow, OK
Posts: 1,544
Matt,
Where is the Blehmco garage? Are they open in the morning? I don't have to be to work until noon and was thinking or taking it somewhere before work. If not I can still run by there on Saturday.
Gjohnson is offline  
Old 04-24-2003, 09:54 PM
  #6  
STFU n00b!
iTrader: (44)
 
Matt93SE's Avatar
 
Join Date: Aug 2000
Location: Houston
Posts: 18,095
I'll be at school/work all day friday. saturday is the only day the garage is open. they're closed on Sunday to go autocrossing in Stroud.

I'll PM you directions to the "shop"...
Matt93SE is offline  
Old 04-24-2003, 11:08 PM
  #7  
Senior Member
iTrader: (3)
 
lophix's Avatar
 
Join Date: Apr 2002
Posts: 1,716
Originally posted by Matt93SE
bring it by the Blehmco garage. It'll be open all day Saturday. stop by anytime between 10am and 7pm and I'll have the owner take a look.

otherwise, take it by the Sears on 21st and Yale or Dino's tire on admiral. they're the ones I deal with most of the time and even Sears is good about finding weird stuff that I miss.

lol
lophix is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Starrider
3rd Generation Maxima (1989-1994)
9
12-18-2015 04:43 AM
knight_yyz
5th Generation Classifieds (2000-2003)
12
11-01-2015 01:34 PM
JakeOfAllTrades
7th Generation Maxima (2009-2015)
6
10-05-2015 10:40 AM
ColdCananda
6th Generation Maxima (2004-2008)
3
09-20-2015 10:45 PM



Quick Reply: Bushings, alighnment or what??



All times are GMT -7. The time now is 11:01 AM.