so i finally took apart teh entire console/dash just to get to the climate control...
so im driving the car around while it looks like it got broken into...
i have the climate control unit completely apart, just the boards and display plugged in and hanging there...
searching past posts people said to just poke around on the board till you find a bad connection then resolder it and you should be fine... well i cant find any one particular spot that is bad...can anyone give me tips? i really wanna get this fixed so i can put the car back together...
~andrew

 

What's happening again?

 

the display is not showing up all the time... =(

 

What do you mean display? Do you have digital?

 

yes i have a digital display that either fades or doesnt show anything about half the time

 

Sorry, can't help you out man. Mine isn't digital.

 

ok, on mine the display would come back when I flexed the board a bit, then the display would come back. Then I probed the board with a toothpick and found the faulty resistor. I believe it was only a single resistor that caused all the problems. Somewhere on the forum someone did a complete write-up on how to fix the board.