Cam
#1
Cam
hey all does anyone know if anyone makes a bigger cam for our cars? if so than who? is there any type of an engine swap that can be performed on our cars? maybe like an SR20 or RB30?
#3
yea there is an RB30 it is a skyline engine but i dont think that it is possible because my max is frontwheel drive and the sky is rear. So what do you mean for me yes and for you no ? do they make a cam for my car or yes there is an engine swap?
#5
Originally Posted by DopeAZmaxima
hey all does anyone know if anyone makes a bigger cam for our cars? if so than who? is there any type of an engine swap that can be performed on our cars? maybe like an SR20 or RB30?
#6
#7
Originally Posted by Pervis Anathema
First of all, welcome to Maxima.org. Thanks for reading all of the stickies, we appreciate it. Secondly, all you need to know about an engine swap is in my sig. Have fun and let us know how it turns out!
#9
#10
Yes you did:
1) He said "our" cars. He's talking about his VG.
2) VE there ARE bigger cams available.
Long ride in the short bus Shawn boy?
1) He said "our" cars. He's talking about his VG.
2) VE there ARE bigger cams available.
Long ride in the short bus Shawn boy?
Originally Posted by MrGone
no I didn't, I'm a VE, so me = no
he's a VG so he = yes
Long day at work Mr. Jeffy?
he's a VG so he = yes
Long day at work Mr. Jeffy?
#11
#12
Originally Posted by Jeff92se
Yes you did:
1) He said "our" cars. He's talking about his VG.
1) He said "our" cars. He's talking about his VG.
Originally Posted by Jeff92se
2) VE there ARE bigger cams available.
Originally Posted by Jeff92se
long ride in the short bus Shawn boy?
#20
http://www.z31.com/cams.shtml Any one of those cams will fit ur motor, i suggest the MotorSport Non turbo cam if u do not have a turbo it work well for me, i may be selling it in the near future for a bigger one once i get my turbo on!!
#23
http://www.z31.com/cams.shtml Any one of those cams will fit ur motor, i suggest the MotorSport Non turbo cam if u do not have a turbo it work well for me, i may be selling it in the near future for a bigger one once i get my turbo on!!
__________________
so what type of gains did you get from the cam?
__________________
so what type of gains did you get from the cam?
#24
European Z31 Cams 264/262 Turbo and non .392" Unknown
NISMO Z31 Cams 264/262 Turbo and non .392" About $400
Motorsport Auto VG30ET 262/256 Turbo car only .420" $169.95 Exchange only
Motorsport Auto VG30ET 270/262 Turbo car only .420" $169.95 Exchange only
Motorsport Auto VG30E 260/260 N/A car only .420" $169.95 Exchange only
Motorsport Auto VG30E 270/270 N/A car only .427" $169.95 Exchange only
Motorsport Auto VG30E 280/280 N/A car only .435" $169.95 Exchange only
ISKY (Iskendarian Cams) 262/258 Turbo and non .450" About $200 Exchange only
PAECO DSV-5800 Street 280/280 Ideal Turbo .328" $230 Each - $250/Core
PAECO DSV-6200 Strt/Strp 288/288 Turbo and non .360" $230 Each - $250/Core
PAECO DSV-6800 RACE 302/302 Turbo and non .373" $230 Each - $250/Core
Jim Wolf Technology (Turbo) Specs Proprietary Specs Proprietary About $450
Web Cams anything anything $100-400 depending
you can also swap in a vg30et like i did. overall it cost me a bit less than 2000 dollars to do the swap but i did most of the work myself. it all depends on what you're capable of.
(guess i was a bit slow on my reply)
NISMO Z31 Cams 264/262 Turbo and non .392" About $400
Motorsport Auto VG30ET 262/256 Turbo car only .420" $169.95 Exchange only
Motorsport Auto VG30ET 270/262 Turbo car only .420" $169.95 Exchange only
Motorsport Auto VG30E 260/260 N/A car only .420" $169.95 Exchange only
Motorsport Auto VG30E 270/270 N/A car only .427" $169.95 Exchange only
Motorsport Auto VG30E 280/280 N/A car only .435" $169.95 Exchange only
ISKY (Iskendarian Cams) 262/258 Turbo and non .450" About $200 Exchange only
PAECO DSV-5800 Street 280/280 Ideal Turbo .328" $230 Each - $250/Core
PAECO DSV-6200 Strt/Strp 288/288 Turbo and non .360" $230 Each - $250/Core
PAECO DSV-6800 RACE 302/302 Turbo and non .373" $230 Each - $250/Core
Jim Wolf Technology (Turbo) Specs Proprietary Specs Proprietary About $450
Web Cams anything anything $100-400 depending
you can also swap in a vg30et like i did. overall it cost me a bit less than 2000 dollars to do the swap but i did most of the work myself. it all depends on what you're capable of.
(guess i was a bit slow on my reply)
#25
#26
Now thats odd i postd "ttp://www.z31.com/cams.shtml Any one of those cams will fit ur motor, i suggest the MotorSport Non turbo cam if u do not have a turbo it work well for me, i may be selling it in the near future for a bigger one once i get my turbo on!!" and it showed up that DopeHEAD posted it.
Anyway ull get diff gains with each cam cuz there all diff, it all depends on how u have everything else set up , i suggest that u read up on how cams work and what kinda gains u will get with each grind cuz depending on ur motor specs and setup ull need deiff things and will see diff gains Me an Mark (MtCookson) have a turbo and iv noticed huge gains as im sure hell say the same but a n/a with 200,000 miles might just mess stuff up and notice no giains, these aint plug and play either expect to spend housr putting them in if its in the car and ur gunna need ur lifters re ground or new ones all together cuz if u dont in about 2 months ull be srry
Anyway ull get diff gains with each cam cuz there all diff, it all depends on how u have everything else set up , i suggest that u read up on how cams work and what kinda gains u will get with each grind cuz depending on ur motor specs and setup ull need deiff things and will see diff gains Me an Mark (MtCookson) have a turbo and iv noticed huge gains as im sure hell say the same but a n/a with 200,000 miles might just mess stuff up and notice no giains, these aint plug and play either expect to spend housr putting them in if its in the car and ur gunna need ur lifters re ground or new ones all together cuz if u dont in about 2 months ull be srry
#27
Jeff i see where ur going with this it may be hopeless! But hey we can atleast give out our knowledge with a disclaimer
WE ARE NOT RESPONSIBLE FOR UR MAX BEING IN PIECES
Anyway Jeff can u get me the specs on that Cobra Brake Adapter Plate i just need to know how far apart the holes are from each other on the short way i have the length the long way.
Jon
WE ARE NOT RESPONSIBLE FOR UR MAX BEING IN PIECES
Anyway Jeff can u get me the specs on that Cobra Brake Adapter Plate i just need to know how far apart the holes are from each other on the short way i have the length the long way.
Jon
#28
A little less than 1.5". Why do you need that?
Originally Posted by 90SEBlack
Anyway Jeff can u get me the specs on that Cobra Brake Adapter Plate i just need to know how far apart the holes are from each other on the short way i have the length the long way.
Jon
Jon
#29
Im crafting me a set and another guy on org , 1/4 Aluminum is thick enough right wont hit anyting under there will it.
#30
Originally Posted by DopeAZmaxima
only one I have a SOHC
You need to learn about your car before you ever mod it.
#31
Hmmm, some thoughts from me.
1) Aluminum is nice. I think you won't be able to make your own set cheaper than I sell them. Strength? No idea.
2) 1/4". Be vary careful about how thick you make them.
If you are going to just copy my design, at least have the decency to to buy a set first.
1) Aluminum is nice. I think you won't be able to make your own set cheaper than I sell them. Strength? No idea.
2) 1/4". Be vary careful about how thick you make them.
If you are going to just copy my design, at least have the decency to to buy a set first.
Originally Posted by 90SEBlack
Im crafting me a set and another guy on org , 1/4 Aluminum is thick enough right wont hit anyting under there will it.
#32
wouldnt that defeat the purpose of me making them. It will cost me about $1.12 and about 1 - 2 hr of time on the Bridgeport. So if u can be $1.12 shipped then ill buy them from u!!
Thnks for moving the Intake thread 2. There was no need for that.
Thnks for moving the Intake thread 2. There was no need for that.
#33
1) Have fun with your brackets.
2) OF course there was a need. It's very clearly explained. If there was no need, you wouldn't have posted the same for sale thread 3-4 times in the wrong section.
2) OF course there was a need. It's very clearly explained. If there was no need, you wouldn't have posted the same for sale thread 3-4 times in the wrong section.
Originally Posted by 90SEBlack
wouldnt that defeat the purpose of me making them. It will cost me about $1.12 and about 1 - 2 hr of time on the Bridgeport. So if u can be $1.12 shipped then ill buy them from u!!
Thnks for moving the Intake thread 2. There was no need for that.
Thnks for moving the Intake thread 2. There was no need for that.
#34
Ur so ana l , Just because some one else can do the same thing that u can do or has something that is nice 2 u have to act like a dik about it. And I will ill have a ball with my brackets and ill even take pics when im done and post them just like u did on thise 3 rd gen forum and not the for sale section and if recall they were for sale also but there must have been a need for it cuz ur a moderator and u can do what ever u dam well pleaz
#35
I have no idea what you just wrote. Contact Matt93se, maybe he will give you the bracket specifications to his kit.
Originally Posted by 90SEBlack
Ur so ana l , Just because some one else can do the same thing that u can do or has something that is nice 2 u have to act like a dik about it. And I will ill have a ball with my brackets and ill even take pics when im done and post them just like u did on thise 3 rd gen forum and not the for sale section and if recall they were for sale also but there must have been a need for it cuz ur a moderator and u can do what ever u dam well pleaz
#36
Jeff92se
Moderator... do you fish?
Joined: Aug 2000
Location: yo mama's city!, 12
Report Post | IP: Logged Funny you ask if I make them but you know the price? I have them mass made for $40+shipping.
Quote:
--------------------------------------------------------------------------------
Originally Posted by Julio
Are you selling the brackets to others by any chance? I would be willing to buy them for 40 bucks. Did you make them, or did you have a machine shop do it up?
--------------------------------------------------
Looks like a post that u made in this forum about selling the brackets that u are making. How is this any diff. than me showing off my manifolds and saying that i can make them for other people??????
Moderator... do you fish?
Joined: Aug 2000
Location: yo mama's city!, 12
Report Post | IP: Logged Funny you ask if I make them but you know the price? I have them mass made for $40+shipping.
Quote:
--------------------------------------------------------------------------------
Originally Posted by Julio
Are you selling the brackets to others by any chance? I would be willing to buy them for 40 bucks. Did you make them, or did you have a machine shop do it up?
--------------------------------------------------
Looks like a post that u made in this forum about selling the brackets that u are making. How is this any diff. than me showing off my manifolds and saying that i can make them for other people??????
#37
hahahaha
dude, Jeff isnt even making money on his stuff, or if he is, its only like a buck or two. Atleast he is making the brackets avaliable to the community, and he has taken a larger hit (money wise) on the actual R&D part. Before you go and call him **** and say he's being a **** about it, think about the time, effort and money he's put into it. Nealoc didn't give any measurements or any design info out when he made his brackets.
Jeeze, He's only saying buy the bracket because it's the right thing to do. I think he's laughing at the thought of actually making money off the brackets.
Also Both Matt and Jeff used steel, so I don't think I would be use aluminum if I were in your shoes. And it's funny that you bring up the fact that he is a moderator, because he has done absolutely nothing to even justify you bringing that into it.
Dont take this stuff personally, He's not acting "ana l" or "like a dik" because he has moderator status, he's doing it because of how you are treating him.
dude, Jeff isnt even making money on his stuff, or if he is, its only like a buck or two. Atleast he is making the brackets avaliable to the community, and he has taken a larger hit (money wise) on the actual R&D part. Before you go and call him **** and say he's being a **** about it, think about the time, effort and money he's put into it. Nealoc didn't give any measurements or any design info out when he made his brackets.
Jeeze, He's only saying buy the bracket because it's the right thing to do. I think he's laughing at the thought of actually making money off the brackets.
Also Both Matt and Jeff used steel, so I don't think I would be use aluminum if I were in your shoes. And it's funny that you bring up the fact that he is a moderator, because he has done absolutely nothing to even justify you bringing that into it.
Dont take this stuff personally, He's not acting "ana l" or "like a dik" because he has moderator status, he's doing it because of how you are treating him.
#38
Because someone ASKED me. What do you want me to do????
That is a little different than just plastering your huge ad for OEM stock manifolds that EVERYONE already knows what they are. They are just oem VG manifolds.
Just so it's clear, MY POST REFERENCE WAS AN ANSWER TO A QUESTION, NOT JUST A POST TO SELL OEM NISSAN PARTS.
This discussion is over. Test me if you want. You don't.
That is a little different than just plastering your huge ad for OEM stock manifolds that EVERYONE already knows what they are. They are just oem VG manifolds.
Just so it's clear, MY POST REFERENCE WAS AN ANSWER TO A QUESTION, NOT JUST A POST TO SELL OEM NISSAN PARTS.
This discussion is over. Test me if you want. You don't.
#39
There is a difference between mentioning that your selling something in a thread vs. creating a thread to try to sell something.
IE, a thread pops up about suspension, we all mention that Matt has custom products out, or matt mentions it. Its fine and dandy. Same thing with brakes, someone mentions brakes and Matt and Jeff will present the things they can offer.
And to prevent you from saying they can get away with it, take Internetautomar for example, we are always saying buy parts from him, and he says he sells parts too, but there is a clear difference between mentioning it in a thread to help someone out/etc than posting a "Forsale: blah blah blah" thread in the 3rd gen discussion. There is a reason for the classifieds, if people want them they will look.
If you are worried that not enough people check the classifieds make a line in your signature and link it.
IE, a thread pops up about suspension, we all mention that Matt has custom products out, or matt mentions it. Its fine and dandy. Same thing with brakes, someone mentions brakes and Matt and Jeff will present the things they can offer.
And to prevent you from saying they can get away with it, take Internetautomar for example, we are always saying buy parts from him, and he says he sells parts too, but there is a clear difference between mentioning it in a thread to help someone out/etc than posting a "Forsale: blah blah blah" thread in the 3rd gen discussion. There is a reason for the classifieds, if people want them they will look.
If you are worried that not enough people check the classifieds make a line in your signature and link it.
#40
He keeps deleting my POST's about my VG intakes hes del 2 of them. And it was no diff. than his on the brake setup , so what is the justified reason for him to be able to have it in the forum but me having to have it in the for sale forum, I could care less if hes makin money or not i have the resources to make them cheaper so ill make them my self justwanted the specs on the other 2 holes, ur tellin me if u could make something much cheaper than some one else was selling it that u would bye it from them because its the right things to do, Why is it the right thing to do.