anyone interested?
If so I am able to have them made.
BUT, we need enough people to be interested.

 

I voted for 1 and 3

but I think something else will be coming along aswell, so lets wait and see. Price is a concern though, as I have no money

 

what about the big rear bushing? that's the one that needs the work. I've got a front one in the works.

 

U talking about the solid rubber one?
Cause this place will make practically anything out of urethane.
of course it's their own special urethane blends.

Matt- E-mail me to discuss particulars

 

YGM dude.
7890

 

you only needed the 90

 

hahahah

I want mail.

hey brian, what about just straight polyurethane, I'd rather buy it from you than MCMaster

 

crowd chants "engine mounts!!!"

 

haven't looked into it yet.

 

yeah, I was talking to a mount manufacturer this afternoon about the VE 5 spd mount

 

make a set for VGs and sign me up for #1

 

Jeff was kind enough to point out that my rear tranny mount only has 1 bolt holding it to the tranny when we were installing my tokico/eibachs.


Maybe I should find that other bolt and install it. Better yet, maybe I should find a non broken mount.

 

We'll see what these people can do and what the required quantities are, and I'll go from there

 

if you need a set of VG mounts let me know.

 

You mean samples?

 

yup...sample/test

 

I'll let you know.

 

Whiteline makes the front control arm bushing for the Nissan Pintara, which is the Stanza over here. It's the same bushing for the Maxima. They also have the rear bushing. They basically have alot of urethane bushings for the Pintara, if it's not listed on their site (www.whiteline.com.au) then write them and ask specifically for the J-30 or U-12 Pintara.

 

What motor is in the Pintara?

 

ok, I've been thinking about this for a while now, and what big rear bushing?????
the ones on the radius arms?
I almost think your talking about a 4th/5th gen

 

im in if somebody can get some uro CA bushings made i need to replace mine and my buddys this summer

 

he is talking about the big rear bushing on the back of the front control arm.

 

What Mike said...

the front lower control arm has two bushings- one on the front and rear of it.

The front bushing will be fairly easy to create, the rear one will be a PITA.

 

I don't see why would you want to bother fabricating it since there are a lot of Australian companies that are making them for our car. Noltec is one of them.

Well, if you do decided to fabricate them. Just make sure you could beat these whacky prices at:

http://www.oztek.us/noltec.php?mid=25

and still able to retain some profits for yourself.

 

The biggest issue on it is price. The website pricing shows $100 per side on the front bushings-- or is that per pair?

 

Matt it looks like it may be for the pair because it says 1 kit needed which to me would mean it is for both control arms but who knows for sure because it could mean 1 kit needed per side LOL.

I guess we need to email them and find out.

 

that's my whole point. I'm having an Aussie friend contact them and see what's up.

 

$100 for both sides, there were 4 bushings total but they're sold in two seperate kits, the front was $3x and back was $67. Each one of their kit contains bushings for both sides. However, you could always call them up and ask. Their telephone number is listed on that website also.

Here is some snap shot of my $100 order:
http://www.cis.syr.edu/~bvtran/car/controlArmBushings/

 

gimme gimme gimme

 

I need some samples to send these guys to see if they can produce it.
anything you want in poly I need sample of to have them estimate.
Can't be a used part though the tolerances may be off

 

fark!
i replaced the control arm bushings this past october! none of those bushings for me i guess.

automart,
within a few weeks i could possibly have some bushings for ya...it's not definate though.

i vote poly-u engine/tranny mounts.

matt,
does the st sway bar kit come with urethane bushings for both the front and rear bars?

 

I need the big bushing and the mounts.
I've got the little bushing already.

 

yep.

 

thanx man

 

Brian, the bushings are about $30/set from nissan. I think the front one is like $13 and the rear is $17 or so..
usually I buy two full sets (both sides, two cars worth) from courtesy for just a hair over $100....

anyway, they're not too pricey.. send 'em one and see what happens. I'd also like info on some others if these turn out well. (another similar application, but I'm not saying anything until we know the J30 will work. )

 

Me too, me too.

 

I need samples I need samples

 

Brian, fork out a couple bucks and buy some! If you want to make money on it, you gotta spend a little to develop the parts!

 

that's part of the problem.
I ain't got none

Maybe I need to raise some of my prices so I can make some money

 

well if you need stock VG mounts...let me know.
i'll send them over.