Rebuilding rear calipers?
05-12-2004, 08:27 AM
#1
Rebuilding rear calipers?
My rear calipers have ripped piston boots. I was thinking of rebuilding them but I looked in the FSM and they are pretty complicated with the e-brake and all. Has anyone ever done this? I realize it is just a matter of taking things apart and then putting them back together, but there are a ton of tiny rings and pieces. Basically this boils down to economics vs ability: a rear rebuild kit is ~$35 per side from the dealer, while a rebuilt caliper is $75 from autozone. Adding to the problem is that the current calipers are painted with Folia-Tec paint, and I gave the extra away, so I'd need to buy another kit which is $35. Thanks for any advice.
05-12-2004, 08:34 AM
#2
I vote for rebuild.. If you've got the FSM, it's not bad.
yeah, it's a PITA due to the tiny parts, but it's nothing that's impossible to do.
the rebuild kit should be $35 per axle, not side... (you only need one kit for both calipers)
Might check with EvilBill and get his input on it. (I've sent him a PM to look at this thread)
yeah, it's a PITA due to the tiny parts, but it's nothing that's impossible to do.
the rebuild kit should be $35 per axle, not side... (you only need one kit for both calipers)
Might check with EvilBill and get his input on it. (I've sent him a PM to look at this thread)
I can get Caliper rebuild kits.
05-13-2004, 03:18 AM
#4
Originally Posted by Matt93SE
I vote for rebuild.. If you've got the FSM, it's not bad.
yeah, it's a PITA due to the tiny parts, but it's nothing that's impossible to do.
the rebuild kit should be $35 per axle, not side... (you only need one kit for both calipers)
Might check with EvilBill and get his input on it. (I've sent him a PM to look at this thread)
yeah, it's a PITA due to the tiny parts, but it's nothing that's impossible to do.
the rebuild kit should be $35 per axle, not side... (you only need one kit for both calipers)
Might check with EvilBill and get his input on it. (I've sent him a PM to look at this thread)
Yeah, the rebuild kit for the rears is about $40 and covers both caliper sides, not just one.
You have to be REAL patient on this endeavor. It's not for the ansy or easily frustrated. It can be a PITA to do. If have the time, get a rebuild kit. If you don't, then go get a reman. caliper.
05-13-2004, 03:29 AM
#5
stupid haynes manual just says it should be left to professional.....................however, the home mechanic can remove the caliper and bring it to a remanufacturer.
Mizeree_X , would you be able to scan the fsm picture. i have to rebuild one of mine before putting the rear discs on my car, so i have the time, but i didnt wanbt to spend the money at autozone. thanks
Mizeree_X , would you be able to scan the fsm picture. i have to rebuild one of mine before putting the rear discs on my car, so i have the time, but i didnt wanbt to spend the money at autozone. thanks
05-13-2004, 03:46 AM
#6
http://s92599732.onlinehome.us/image...perDiagram.JPG
Juan, PM me if you want the Brake section of the FSM
Juan, PM me if you want the Brake section of the FSM
Thread
Thread Starter
Forum
Replies
Last Post
6spd4dsc
5th Generation Classifieds (2000-2003)
4
03-04-2016 05:19 PM
bbsitum
4th Generation Maxima (1995-1999)
4
09-11-2015 04:55 PM