Maxima Reliability?
01-17-2005, 04:02 PM
#1
Newbie - Just Registered
Thread Starter
Join Date: Jan 2005
Posts: 6
Maxima Reliability?
Hey. I was wondering about the reliability of 3rd gen Maximas, specifically the 92-94 SE's w/ the ve's? How has your cars been treating you guys? I need to buy a car for my job this summer (starting co-op), and I want something that'll last me 2 years (preferably more) without having to spend a ton on fixing it when it breaks down. I used to have a 1st gen Altima, and it held up beautifully, I drove it for 60,000 km, and it had over 200,000 when I was done and not a single problem. Is the 92-94 Maxima SE's a good way to go or what?
01-17-2005, 04:37 PM
#2
Originally Posted by tix
Hey. I was wondering about the reliability of 3rd gen Maximas, specifically the 92-94 SE's w/ the ve's? How has your cars been treating you guys? I need to buy a car for my job this summer (starting co-op), and I want something that'll last me 2 years (preferably more) without having to spend a ton on fixing it when it breaks down. I used to have a 1st gen Altima, and it held up beautifully, I drove it for 60,000 km, and it had over 200,000 when I was done and not a single problem. Is the 92-94 Maxima SE's a good way to go or what?
01-17-2005, 05:59 PM
#4
Senior Member
Join Date: Dec 2004
Posts: 304
In my case that car I was given needs (possibly) head gasket,window regs(all 4) and I think that's it,untill the Z-tech tells me tomorow. But the car was from Califorinia as of I think 8 months ago and teh owners has FULL records of it's health.
Only has 144,XXX miles on it,so it's a good car !
Only has 144,XXX miles on it,so it's a good car !
01-17-2005, 06:33 PM
#5
Newbie - Just Registered
Thread Starter
Join Date: Jan 2005
Posts: 6
Thanks for the responses, it makes me feel better 
With the VTC, is the noise a problem, or just an inconvenience?
Any trouble spots on the body of the car itself, like places I should be looking for rust?
As long as the Window regulators, coils, and fuel injectors don't all go bad at once I should be good
With the VTC, is the noise a problem, or just an inconvenience? Any trouble spots on the body of the car itself, like places I should be looking for rust?
As long as the Window regulators, coils, and fuel injectors don't all go bad at once I should be good
01-17-2005, 09:13 PM
#8
At this point almost any car that's over 10 years old will depend on how the previous owner treated the car vs the make/model of the car. But in general, Japanese cars will have the best general reliability and cheapest repair costs. Honestly if you just need basic transportation, a Honda accord/civic etc... would probably be the best bet. Just won't have the power you might like.
01-17-2005, 09:31 PM
#10
Jeff is right. Another thing to consider is they don't get great gas mileage because they are a V6 and the owner's manual calls for premium fuel. The VE is a lot faster stock for stock than any of the Honda products from the same era, though. They are also more comfortable on long trips and come loaded with creature comforts. Power windows, mirrors, AC, CC are standard. A large percentage of them have leather and moonroof, too.
If you just want a solid work car, I would say buy a Civic, Accord or maybe a Sentra with air conditioning. One with service records would be preferred. They will run a long time, get 30+ mpg and if something goes wrong they will be cheaper to repair.
My first Maxima (Gold 1992 SE 5-speed) I absolutely babied. I bought it in 1995 with 50k? and drove it to 160k and you would have thought it just rolled off the showroom. My current Maxima (Red 1992 SE 5-speed) has been beat on pretty hard and the VTCs were knocking something fierce before I had Jeff install the JDM engine at about 149k miles. There were some other issues involved there, but all-in-all they are very solid cars.
If you just want a solid work car, I would say buy a Civic, Accord or maybe a Sentra with air conditioning. One with service records would be preferred. They will run a long time, get 30+ mpg and if something goes wrong they will be cheaper to repair.
My first Maxima (Gold 1992 SE 5-speed) I absolutely babied. I bought it in 1995 with 50k? and drove it to 160k and you would have thought it just rolled off the showroom. My current Maxima (Red 1992 SE 5-speed) has been beat on pretty hard and the VTCs were knocking something fierce before I had Jeff install the JDM engine at about 149k miles. There were some other issues involved there, but all-in-all they are very solid cars.
01-17-2005, 09:33 PM
#11
Might be easier getting into Area 51. 
Originally Posted by Slamnasty
If you can find one in decent in/out shape, with a recent injector job and strict proper-octane diet w/ regular oil/fluid changes, you are SET.
01-17-2005, 10:46 PM
#12
if you want a reliable beater to get around. you can pick up a perfectly good ford escort for a few hundred bucks. they have very tough engines. watch out for electrical problems though.
01-18-2005, 06:14 AM
#13
Originally Posted by Hectic
if you want a reliable beater to get around. you can pick up a perfectly good ford escort for a few hundred bucks. they have very tough engines. watch out for electrical problems though.
expensive ignition switches
usually not maintained because they were sold as disposable cars.
01-18-2005, 07:35 AM
#14
Member
Join Date: May 2002
Posts: 196
I would go with a '89-91 SE or any 3rd gen gxe. The VG engine is likely the best engine to ever be produced in Japan. As long as you change the timing belt the thing will run forever. I have looked at many '92-94 SE models and no matter the mileage, as low as 72,--- on one vehicle, the VTC's rattled. Unless you have a friend at nissan that is willing to loan you the special tool needed to replace this item, I would shy away from the '92-94 SE. You could always ground one of the VTC's and more or less reduce/eliminate the noise.
01-18-2005, 08:06 AM
#16
I'm at 166,XXX I think, no VTC noise to speak of. I would say mine has been reliable, aside from replacing the starter, but that was probably my own fault as this is my first manny tranny car and I basically taught myself on this car...lots of stalling...
Things I still need is a front passenger window regulator, but its winter so no worries right now for one. Its never left me stranded in the south dakota chilli winter this year yet.
Things I still need is a front passenger window regulator, but its winter so no worries right now for one. Its never left me stranded in the south dakota chilli winter this year yet.
01-18-2005, 08:34 AM
#17
Senior Member
Join Date: Dec 2004
Location: EU Scandinavia
Posts: 4,323
Reliability means different issues to different people.
If reliability is that whatever mileage between oilchange, not one drop has to be added, buy Maxima. If want to add oil every second tank, buy GM Opel, half gallon oil with 1000 miles is 'normal'...
Basic construction is good and component MTBF =meantimebetweenfailure is high. However, the ship is loaded. When u load u ship, its gonna have glitches more that a very basic mechanical diesel...
I would not buy ten yr old maxima for commuting although I very much like its handling; more practical rigs are available with nissan or whatever... But if u love luxury, and gas consumption does not bother: GO for Maxima!1
Think about THE loaded computronics center:
http://www.cardomain.com/memberpage/748507/14
If reliability is that whatever mileage between oilchange, not one drop has to be added, buy Maxima. If want to add oil every second tank, buy GM Opel, half gallon oil with 1000 miles is 'normal'...
Basic construction is good and component MTBF =meantimebetweenfailure is high. However, the ship is loaded. When u load u ship, its gonna have glitches more that a very basic mechanical diesel...
I would not buy ten yr old maxima for commuting although I very much like its handling; more practical rigs are available with nissan or whatever... But if u love luxury, and gas consumption does not bother: GO for Maxima!1
Think about THE loaded computronics center:
http://www.cardomain.com/memberpage/748507/14
01-18-2005, 11:30 AM
#18
Newbie - Just Registered
Thread Starter
Join Date: Jan 2005
Posts: 6
Wow, thanks for the advice guys. Gas mileage is not a HUGE problem for me, but I am not about to go out and buy a 5.0L mustang or anything (my buddy used to get 8mpg w/ his!).
Reasons I was looking at the Maxima:
I like luxury (leather, 4 doors, etc..)
They look very nice and classy for their era
I also wanted a bit of base power (i.e. the VE).
I love Nissans
I love cars, and I would be modding the max, albeit very slowly. If I am going to buy a car though, I want something I can have a bit of fun with as well not just something for getting around (if I am going to be driving it for a few years). Thanks for all the responses
Edit: I don't need to worry about the sound system either, I have a HU, speakers, amp and sub waiting for a car to be put into.
Reasons I was looking at the Maxima:
I like luxury (leather, 4 doors, etc..)
They look very nice and classy for their era
I also wanted a bit of base power (i.e. the VE).
I love Nissans
I love cars, and I would be modding the max, albeit very slowly. If I am going to buy a car though, I want something I can have a bit of fun with as well not just something for getting around (if I am going to be driving it for a few years). Thanks for all the responses
Edit: I don't need to worry about the sound system either, I have a HU, speakers, amp and sub waiting for a car to be put into.
01-18-2005, 07:54 PM
#19
Senior Member
Join Date: Dec 2004
Posts: 304
Originally Posted by Jeff92se
At this point almost any car that's over 10 years old will depend on how the previous owner treated the car vs the make/model of the car. But in general, Japanese cars will have the best general reliability and cheapest repair costs. Honestly if you just need basic transportation, a Honda accord/civic etc... would probably be the best bet. Just won't have the power you might like.
01-18-2005, 10:10 PM
#22
Originally Posted by tix
Wow, thanks for the advice guys. Gas mileage is not a HUGE problem for me, but I am not about to go out and buy a 5.0L mustang or anything (my buddy used to get 8mpg w/ his!).
Just buy what you think suits you. Maximas are overall very reliable. It all comes down to what you want and what the car has been through. Buying any used car is a crapshoot, it's just your odds are better with something that has a proven record of reliability, like the Maxima, Camry, Civic, Accord or Celica. There are thousands and thousands of owners of these cars over 200k miles with the original drivetrains.
01-18-2005, 10:12 PM
#23
Originally Posted by Red92MaxSE
I got nearly 30 mpg in my 5.0 convertible (5-speed with stock 3.08 gears) on the freeway and about 20 or so in town, so your buddy must go through the rear tires, if you know what I mean.
Just buy what you think suits you. Maximas are overall very reliable. It all comes down to what you want and what the car has been through. Buying any used car is a crapshoot, it's just your odds are better with something that has a proven record of reliability, like the Maxima, Camry, Civic, Accord or Celica. There are thousands and thousands of owners of these cars over 200k miles with the original drivetrains.
Just buy what you think suits you. Maximas are overall very reliable. It all comes down to what you want and what the car has been through. Buying any used car is a crapshoot, it's just your odds are better with something that has a proven record of reliability, like the Maxima, Camry, Civic, Accord or Celica. There are thousands and thousands of owners of these cars over 200k miles with the original drivetrains.
I know a few modded ones that only get 10-12mpg.
01-19-2005, 07:36 AM
#25
Senior Member
iTrader: (1)
Join Date: Jan 2002
Location: Miami, FL. / Indianapolis, IN.
Posts: 2,614
Originally Posted by PulsarDriver
Everything internetautomar mentioned
plus all 3rd gen Maxes seem to have rather weak trannies.
plus all 3rd gen Maxes seem to have rather weak trannies.
01-19-2005, 05:30 PM
#26
Newbie - Just Registered
Thread Starter
Join Date: Jan 2005
Posts: 6
Originally Posted by Red92MaxSE
I got nearly 30 mpg in my 5.0 convertible (5-speed with stock 3.08 gears) on the freeway and about 20 or so in town, so your buddy must go through the rear tires, if you know what I mean.
...
...
Car was one of the fastest I've been in, it pinned you to the back of your seat.
01-19-2005, 05:59 PM
#27
Senior Member
Join Date: Dec 2004
Posts: 304
What's the tranny upgrade for our cars called and what was it good for power wise ? I remember looking in the photo gallery on turbomaximas.com and this guy had something called the level 10. Can anyone tell me what the hell this is and where I can get it ?
01-19-2005, 06:33 PM
#28
Senior Member
iTrader: (1)
Join Date: Jan 2002
Location: Miami, FL. / Indianapolis, IN.
Posts: 2,614
Originally Posted by Blackbob
What's the tranny upgrade for our cars called and what was it good for power wise ? I remember looking in the photo gallery on turbomaximas.com and this guy had something called the level 10. Can anyone tell me what the hell this is and where I can get it ?
01-19-2005, 07:46 PM
#30
Newbie - Just Registered
Thread Starter
Join Date: Jan 2005
Posts: 6
Valve bodies are an INTRICATE network of channels (holes) with little ball bearring and **** in it, partly controlled by solenoids that shift the transmission into different gears. I imagine a valve body upgrade would probably result in different shift times at different loads.
I think anyways... lol, I worked for a summer rebuilding automatic Subaru transmissions and I still don't know
Upon looking at turbomaxima.com, that level 10 thing looks like a gear set. Those suckers are a ***** to pt back in, especially those clips that hold em in place
I think anyways... lol, I worked for a summer rebuilding automatic Subaru transmissions and I still don't know
Upon looking at turbomaxima.com, that level 10 thing looks like a gear set. Those suckers are a ***** to pt back in, especially those clips that hold em in place
01-20-2005, 04:56 AM
#32
valvebodies are normally "reprogrammed" by enlarging holes and changing the springs within the valvebody. sometimes they will reroute or even block off fluid passages.
I sold trans parts for 8 months and I actually learned a thing or 3.
I sold trans parts for 8 months and I actually learned a thing or 3.
01-20-2005, 04:50 PM
#33
Senior Member
iTrader: (1)
Join Date: Jan 2002
Location: Miami, FL. / Indianapolis, IN.
Posts: 2,614
Originally Posted by tix
Valve bodies are an INTRICATE network of channels (holes) with little ball bearring and **** in it, partly controlled by solenoids that shift the transmission into different gears. I imagine a valve body upgrade would probably result in different shift times at different loads.
I think anyways... lol, I worked for a summer rebuilding automatic Subaru transmissions and I still don't know
Upon looking at turbomaxima.com, that level 10 thing looks like a gear set. Those suckers are a ***** to pt back in, especially those clips that hold em in place
I think anyways... lol, I worked for a summer rebuilding automatic Subaru transmissions and I still don't know
Upon looking at turbomaxima.com, that level 10 thing looks like a gear set. Those suckers are a ***** to pt back in, especially those clips that hold em in place
01-20-2005, 05:50 PM
#34
Originally Posted by tix
Hey. I was wondering about the reliability of 3rd gen Maximas, specifically the 92-94 SE's w/ the ve's? How has your cars been treating you guys? I need to buy a car for my job this summer (starting co-op), and I want something that'll last me 2 years (preferably more) without having to spend a ton on fixing it when it breaks down. I used to have a 1st gen Altima, and it held up beautifully, I drove it for 60,000 km, and it had over 200,000 when I was done and not a single problem. Is the 92-94 Maxima SE's a good way to go or what?
01-21-2005, 06:14 AM
#37
Originally Posted by maximaboi
214,000 miles engine still runs great. all that has been done was replace the timing belt, water pump and tensioner pulley.
its still a max 
so was my L24
01-21-2005, 08:20 AM
#40
Newbie - Just Registered
Thread Starter
Join Date: Jan 2005
Posts: 6
Originally Posted by GRNMAXDMON
i hope ur referring to the valve body cuz they r not a b!tch to put back in.