My car's still on the lift!!

Reply Subscribe

Thread Tools

Search this Thread

10-20-2005, 07:00 AM

bhunter

Supporting Maxima.org Member

Thread Starter

iTrader: (3)

Join Date: Aug 2004

Posts: 1,036

My car's still on the lift!!

Had my job all planned out. Had my new axle and seal, new wheel bearing and two seals. Figured two hours would be a good goal. Took everything apart, pressed the old bearing out, new one in. Yanked out the old axle, pried out the old seal. Old axle and new axle match perfectly, what could go wrong? Opened the box for the new seal----WRONG FUCCING ONE!!! Had to leave the car on the lift at work all night and now waiting for the right seal.

Moral: Always check parts in boxes before starting.

10-20-2005, 07:07 AM

maximaboi

Senior Member

iTrader: (1)

Join Date: Sep 2004

Posts: 402

that sux. are they going to get mad at work for the car still being on the lift?

I always try to open the box on anything that I buy before I leave the store. I got a TV from best buy and when I got home and opened up the box it was the wrong TV!! I was soo mad and then on top of that they almost didnt give me my money back.

10-20-2005, 07:09 AM

Wiking

Senior Member

Join Date: Dec 2004

Location: EU Scandinavia

Posts: 4,323

Citroen ZX spent 5days in that game...

Cannot but correct as I was once: "elevator". Brits/Swedes use lifts. But somehow I feel am wrong again???

10-20-2005, 07:14 AM

Greeny

¯\(°_o)/¯

iTrader: (43)

Join Date: Sep 2003

Location: Tunasea

Posts: 64,424

When i did my tranny swap i had run all over middle TN. to find the correct seals for the shafts...Ended up at dealership....Every major parts store in town had the wrong part #'s for the seals.....

10-20-2005, 07:15 AM

GRNMAXDMON

Senior Member

iTrader: (1)

Join Date: Jan 2002

Location: Miami, FL. / Indianapolis, IN.

Posts: 2,614

**** happens but let me tell u everytime im at work and order parts for my car my boss always got on my case to always match the parts while the delivery guy is still there incase the parts r wrong. it has happened to me before and damn was i pissed. but that only happened to me when they kept sendin' me the wrong auto tranny seal when my car was an auto back in the day. they kept sendin' the wrong seal and caused me and my buddy to bring my tranny down a total of 8 times. i got so damn aggrivated that i just left early to go to my other job and then he calls me up to tell me that the right seal finally made it. the thing was that all the seals that we had gotten looked indentical to the original so i didn't understand y my tranny kept on leakin'??? well it got done and tranny only lasted about 6 months after that and finally gave out. what a POS!

10-20-2005, 07:50 AM

bhunter

Supporting Maxima.org Member

Thread Starter

iTrader: (3)

Join Date: Aug 2004

Posts: 1,036

[QUOTE=maximaboi]that sux. are they going to get mad at work for the car still being on the lift?
No it's just embarrassing. I'm the boss.

10-20-2005, 08:31 AM

Matt93SE

STFU n00b!

iTrader: (44)

Join Date: Aug 2000

Location: Houston

Posts: 18,095

repeat after me....
ALWAYS BUY ENGINE AND TRANSMISSION SEALS FROM THE DEALER!!
ALWAYS BUY ENGINE AND TRANSMISSION SEALS FROM THE DEALER!!
ALWAYS BUY ENGINE AND TRANSMISSION SEALS FROM THE DEALER!!
ALWAYS BUY ENGINE AND TRANSMISSION SEALS FROM THE DEALER!!

got it, kids?

10-20-2005, 01:59 PM

internetautomar

mod or sell?

iTrader: (30)

Join Date: Sep 2003

Location: Skokie (look it up)

Posts: 19,760

Quote:

Originally Posted by Matt93SE

Nope, I get aftermarket all the time with no problems.
but then again I don't go to places like autoblown or poop boyz

10-20-2005, 02:03 PM

Matt93SE

STFU n00b!

iTrader: (44)

Join Date: Aug 2000

Location: Houston

Posts: 18,095

yeah, try finding all the seals for a VE w/ LSD.. I've been to about 15 different parts stores and NEVER get the right one, even when giving them the number right off the seal. same thing w/ transmission bearings.
just go to the delaer and pay the extra few bucks.. and they generally have them in stock. no muss, no fuss.

10-20-2005, 02:05 PM

#10

Jeff92se

I'm needing a caw

iTrader: (82)

Join Date: Aug 2000

Posts: 34,147

Napa always gives the wrong seal for the tranny also. I think their data base is wrong for the VE front crank seal also.

10-20-2005, 02:09 PM

#11

internetautomar

mod or sell?

iTrader: (30)

Join Date: Sep 2003

Location: Skokie (look it up)

Posts: 19,760

99% of the stores out there use national/bca/timken part #s and cataloging which is wrong for the VE.
I use someone else's #s
like nissan

10-20-2005, 02:34 PM

#12

bhunter

Supporting Maxima.org Member

Thread Starter

iTrader: (3)

Join Date: Aug 2004

Posts: 1,036

Well, I got the right seal now and am going to finish it tonight. It took two wrong ones and then the right one from the dealer. It's funny the axle from Advance is exactly right but they couldn't even find the right seal.