3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

my max is working on 5 cyl

Thread Tools
 
Search this Thread
 
Old 11-15-2005 | 12:42 PM
  #1  
red-line-racer's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2005
Posts: 214
my max is working on 5 cyl

i bought a 92 se (ve motor). today i started the car and right away the motor stumbles and squicked right away but it drives well i disconnected each plug to see what cyl was it and i found out is was the 3 cyl that was not working right my question is that could it be the coil pack??? and can you do damage to the cyl if you drive it like that??? thanks 4 the advice
Old 11-15-2005 | 02:54 PM
  #2  
Greeny's Avatar
¯\(°_o)/¯
iTrader: (43)
 
Joined: Sep 2003
Posts: 64,424
From: Tunasea
Originally Posted by red-line-racer
i bought a 92 se (ve motor). today i started the car and right away the motor stumbles and squicked right away but it drives well i disconnected each plug to see what cyl was it and i found out is was the 3 cyl that was not working right my question is that could it be the coil pack??? and can you do damage to the cyl if you drive it like that??? thanks 4 the advice

Could be coil pack..Switch it out with one of the other coil packs to see if the problem transfers to the other cylinder...If the same cylinder is still misfiring then you probably need to replace the injector on that cylinder....
Old 11-15-2005 | 04:37 PM
  #3  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
I replaced 7 injectors before the city got my VE, coils were still good. I actually have them in a box in my basement.
it's likely the injector though.
Don't forget to pull the plug to make sure that it's good


oh yeah, I sell injectors, plugs, coil etc...
Old 11-15-2005 | 08:07 PM
  #4  
Slamnasty's Avatar
Senior Member
 
Joined: Jun 2003
Posts: 439
#3 is under the intake manifold isn't it?
Old 11-15-2005 | 08:30 PM
  #5  
red-line-racer's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2005
Posts: 214
Originally Posted by MyGreenMax94
Could be coil pack..Switch it out with one of the other coil packs to see if the problem transfers to the other cylinder...If the same cylinder is still misfiring then you probably need to replace the injector on that cylinder....
i switched the coil and the spark plug and i still get the same thing i will check out the injector tomorrow
Old 11-15-2005 | 08:39 PM
  #6  
Wolf-Strong's Avatar
Senior Member
 
Joined: Nov 2005
Posts: 375
I feel your pain...
When I got my 1990 Max for my 18th bday my dad had to take it to the shop to get most of the fuel injectors replaced. I can't complain much because it does run fine, but skips a lot when idling. Stupid injectors cost like $200-400 a piece (I forgot off hand).

I did get my injectors cleaned out recently though and it helped a little so that might be a worthy choice of action.
Old 11-16-2005 | 06:30 AM
  #7  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
injectors run about $100 ea brand new, whatever you do don't get rebuilts, they don't last.

I sell injectors
Old 11-16-2005 | 08:15 AM
  #8  
maximagxe90's Avatar
Senior Member
 
Joined: Feb 2004
Posts: 535
listen to internetautomar,

he know his stuff,

i had the same experience before,

i had a shop put in a remanufacture injector, and that injector last only for a month, brought the car into another shop replaced with a brand new one,
the car runs alot better then before,
Old 11-16-2005 | 01:42 PM
  #9  
red-line-racer's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2005
Posts: 214
i bought Bosch brand injectors the place i bought them from doesnt say if it new or rebuilt
Old 11-16-2005 | 03:13 PM
  #10  
Alex_V
Guest
 
Posts: n/a
the price you paid would be a indicator. Over $90 or so would probably be new, or they are just ripping you off. I'd definitly find out...

~Alex
Old 11-16-2005 | 05:43 PM
  #11  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
Originally Posted by red-line-racer
i bought Bosch brand injectors the place i bought them from doesnt say if it new or rebuilt
Bosch should be new, but you didn't buy them from me
Old 11-17-2005 | 10:12 AM
  #12  
red-line-racer's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Aug 2005
Posts: 214
Originally Posted by internetautomar
Bosch should be new, but you didn't buy them from me
ha well it was too late i had already had ordered them when you posted that u sell them
Old 11-17-2005 | 05:28 PM
  #13  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
I sell just about anything for cars that I can lay my hands on
Old 11-17-2005 | 05:30 PM
  #14  
AGELG's Avatar
Newbie - Just Registered
 
Joined: Nov 2005
Posts: 3
fan

hey i need the fan asembly for my 91max
Old 11-17-2005 | 05:59 PM
  #15  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
Originally Posted by AGELG
hey i need the fan asembly for my 91max
Ok, so send me money
www.internetautomart.com is my site
Old 11-17-2005 | 08:34 PM
  #16  
Ford5.0forlife's Avatar
Member
 
Joined: Oct 2005
Posts: 55
hmm.. i got a #4 skipping injector same as wolf-strong though its only at idle has been tested to be bad, and skips a bit under heavy load motoring.. what should i do? buy 1 brand new, or 6 (i hear they go 1 after the other), i take it remanufactured from direct auto is out of the question... and no point in getting used injectors off junkyard....

whats the best bet.. even though it doesnt feel like its runs bad it could still probably hurt performance unoticably right?
Old 11-17-2005 | 08:44 PM
  #17  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
actually you'd have better luck with JY injectors than rebuilts.
Old 11-17-2005 | 08:51 PM
  #18  
Ford5.0forlife's Avatar
Member
 
Joined: Oct 2005
Posts: 55
ok, well in that case ill take my chances w/ 1 brand new injector..

p.s. youve got mail
Old 11-18-2005 | 07:51 AM
  #19  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
got it, you should have it on monday. I also tossed in the o'rings which aren't included normally.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Matt93SE
Maximas for Sale / Wanted
33
05-24-2019 03:58 PM
jerrod99_se-l
4th Generation Classifieds (1995-1999)
2
08-27-2015 09:27 PM
Supragte
5th Generation Maxima (2000-2003)
1
08-12-2015 11:00 PM
jholley
5th Generation Maxima (2000-2003)
2
08-11-2015 10:38 AM
kenc15
5th Generation Classifieds (2000-2003)
0
08-05-2015 09:29 AM



Quick Reply: my max is working on 5 cyl



All times are GMT -7. The time now is 12:00 PM.