Maxima Tail Lights
#1
Maxima Tail Lights
I saw a 91 maxima on cardomain.com with some skyline tail light covers does anyone know where I can get some?
And does anyone know how to change the freakin stock foglight bulb on a 92 Maxima? I've tried but I can't seem to find a good tool to get the lense off? Can anyone help?
And does anyone know how to change the freakin stock foglight bulb on a 92 Maxima? I've tried but I can't seem to find a good tool to get the lense off? Can anyone help?
#2
skyline lights come from skylines. Buy them from Japan. Then buy some fiberglass. Buy a hack saw. Buy some beer. Buy some paint. Buy a camera and let us see how they turned out.
Oh, and if i recall you have to take the foglamp off the car to get the bulb out.
Oh, and if i recall you have to take the foglamp off the car to get the bulb out.
#3
For skyline taillights, you can probably get them on Ebay. But you need to do an insane amount of fabrication to get them to look good.
The foglight bulb is easy to replace. Just remove the two philips screws holding the lens.
The foglight bulb is easy to replace. Just remove the two philips screws holding the lens.
#4
Do you ever read any of the other threads you post on? I answered both of these questions in response to you where you posted in other threads. Not being rude but if you ask a question go back and see if it was answered before starting new threads since you basically ignored me or anyone else that replied to you.
Anyway I will answer again lol...
No one makes a skyline light kit for our car. You can buy skyline lights (buy mine I am selling them cheap) and fab them in.
To get the fogs out you first pull the fog assy down by taking the 2 10mm bolts taht hold it on to the bumper (look straight up and you will see them). Then you take the two philips screws off the back to take the lens off.
Anyway I will answer again lol...
No one makes a skyline light kit for our car. You can buy skyline lights (buy mine I am selling them cheap) and fab them in.
To get the fogs out you first pull the fog assy down by taking the 2 10mm bolts taht hold it on to the bumper (look straight up and you will see them). Then you take the two philips screws off the back to take the lens off.
#7
http://www.cardomain.com/ride/530912
This is the car that I was talking about. They are not actual skyline tail lights, they are more like tail light covers. I was asking where can I find something like this.
This is the car that I was talking about. They are not actual skyline tail lights, they are more like tail light covers. I was asking where can I find something like this.
#9
Originally Posted by chay2263
http://www.cardomain.com/ride/530912
This is the car that I was talking about. They are not actual skyline tail lights, they are more like tail light covers. I was asking where can I find something like this.
This is the car that I was talking about. They are not actual skyline tail lights, they are more like tail light covers. I was asking where can I find something like this.
Oh I gotcha...no they put circles on the tail light with tape and the painted the rest of the tail light. They arent covers but just paint.
#10
Originally Posted by chay2263
http://www.cardomain.com/ride/530912
This is the car that I was talking about. They are not actual skyline tail lights, they are more like tail light covers. I was asking where can I find something like this.
This is the car that I was talking about. They are not actual skyline tail lights, they are more like tail light covers. I was asking where can I find something like this.
#12
Originally Posted by MrGone
someone should inform him his nitrous bottle is not installed properly
i wonder how many times he's gonna try filling it before he figures it out.
#13
put coffee cans to get a shape of the red cirlces, tape around the cans , now you have 2 circles masked , spray the rest of the lens with a black paint , there is probally a special kind for the automotive styling, anyway yea remove cans and theres your 2 circles in red .. PM swowlinc , he has done this mod , very similar to the one you see in the pic, and they came out good.
#14
Originally Posted by chay2263
http://www.cardomain.com/ride/530912
This is the car that I was talking about. They are not actual skyline tail lights, they are more like tail light covers. I was asking where can I find something like this.
This is the car that I was talking about. They are not actual skyline tail lights, they are more like tail light covers. I was asking where can I find something like this.
IMO that is one of the cheeziest 3rd Gens I have ever seen. The tails are just what others have said -- spray, and not even good at that. think about the way the light output is compromised with the kit.
#15
Originally Posted by CyMax
IMO that is one of the cheeziest 3rd Gens I have ever seen. The tails are just what others have said -- spray, and not even good at that. think about the way the light output is compromised with the kit.
When I had stock tails I always tapped my brakes a few times to make sure the driver behind me KNEW i was braking. I still got hit in the back once.
In the past 2 years I've seen 3 maxis that rear ended in GA. I wonder what would happen in a case where the lights where painted like that. Insurance wise.
#16
Originally Posted by CyMax
IMO that is one of the cheeziest 3rd Gens I have ever seen. The tails are just what others have said -- spray, and not even good at that. think about the way the light output is compromised with the kit.
#17
Originally Posted by therealgoon9
Stock tails already have pretty poor light output, esp. when their filthy.
When I had stock tails I always tapped my brakes a few times to make sure the driver behind me KNEW i was braking. I still got hit in the back once.
In the past 2 years I've seen 3 maxis that rear ended in GA. I wonder what would happen in a case where the lights where painted like that. Insurance wise.
When I had stock tails I always tapped my brakes a few times to make sure the driver behind me KNEW i was braking. I still got hit in the back once.
In the past 2 years I've seen 3 maxis that rear ended in GA. I wonder what would happen in a case where the lights where painted like that. Insurance wise.
so smooth
#19
Originally Posted by internetautomar
try using better bulbs
I think the VE tails look perfect.
I do need to fix my 3rd brake light though
I think the VE tails look perfect.
I do need to fix my 3rd brake light though
#21
Supporting Maxima.org Member
iTrader: (21)
Join Date: May 2001
Location: Toronto, Canada
Posts: 1,179
Originally Posted by CyMax
IMO that is one of the cheeziest 3rd Gens I have ever seen. The tails are just what others have said -- spray, and not even good at that. think about the way the light output is compromised with the kit.
#24
Originally Posted by koolme88
Can you make Maxima tail lights clear? On beretas youcan take apart the taillights an take out the red an put red bulbs in i was wondering if you can do this on a maxima
The outside lenses are RED plastic. You plan on bleaching the red out?
#25
Originally Posted by koolme88
Can you make Maxima tail lights clear? On beretas youcan take apart the taillights an take out the red an put red bulbs in i was wondering if you can do this on a maxima
The inside of a Beretta taillight has a red lense that is removeable, but it is not legal. To answer your question, no the Maxima does not have that removeable lense on the inside of the taillight. Its 2 pieces, the housing and the outter lense.
#26
well you guys forget about the early SEs. Some have taken the red out of the 89-91 SEs for clear lenses. It looks really bad imo though. First of all you can see the entire assy that holds the bulbs and secondly the corners of the lens is still red because you cant take that part out.
#27
Originally Posted by internetautomar
try using better bulbs
I think the VE tails look perfect.
I do need to fix my 3rd brake light though
I think the VE tails look perfect.
I do need to fix my 3rd brake light though
Thread
Thread Starter
Forum
Replies
Last Post
MikesChevelle
5th Generation Maxima (2000-2003)
4
08-06-2015 11:36 AM
yat70458
5th Generation Maxima (2000-2003)
2
08-03-2015 01:16 PM