Those with aftermarket clutches! Enter.
#1
Those with aftermarket clutches! Enter.
Where is the best place for a deal on clutches?
I don't need a stage 3 or anything, just something that will hold up better than OEM.
Also, looking at part numbers.... I noticed that 84-01 are the same???
Looking in the GD section, Exedy any good for $270?
I don't need a stage 3 or anything, just something that will hold up better than OEM.
Also, looking at part numbers.... I noticed that 84-01 are the same???
Looking in the GD section, Exedy any good for $270?
#2
Clutch
I just put in a "proclutch" that I got off of ebay. It's supposed to be a stage one. It has an Exedy disk. Not a bad buy for the price I think it was about $160 shipped and I haven't had any problems with it. I was also just looking for something slightly better that OEM and I'm happy with it.
#4
Originally Posted by Pervis Anathema
Exedy + Fidanza > *
OEM pedal feel and effort, (slightly lighter IMO), no slip, fast revs.
OEM pedal feel and effort, (slightly lighter IMO), no slip, fast revs.
Think I found a good deal for an exedy, the pressure plate looks real beefy too.
#5
Originally Posted by therealgoon9
Where is the best place for a deal on clutches?
I don't need a stage 3 or anything, just something that will hold up better than OEM.
Also, looking at part numbers.... I noticed that 84-01 are the same???
Looking in the GD section, Exedy any good for $270?
I don't need a stage 3 or anything, just something that will hold up better than OEM.
Also, looking at part numbers.... I noticed that 84-01 are the same???
Looking in the GD section, Exedy any good for $270?
![wall](https://maxima.org/forums/images/smilies/peepwall.gif)
#6
www.nipponpower.com is where I got my SPEC. If you get the 84-86 300ZX clutch you can usually save a bit of money and they have higher capacity ratings. The throwout bearing that comes with it doesn't work with the Maxima but the disk and pressure plate bolt right up.
#9
Originally Posted by mtcookson
www.nipponpower.com is where I got my SPEC. If you get the 84-86 300ZX clutch you can usually save a bit of money and they have higher capacity ratings. The throwout bearing that comes with it doesn't work with the Maxima but the disk and pressure plate bolt right up.
NICE dude thanks A LOT that helps out with a lot of confusion... like not finding a lot of stuff for maximas
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![+1](https://maxima.org/forums/images/smilies/+1.gif)
#13
Originally Posted by maxmaxima91
i know i may get flamed for this but its no lie.. Fidanza and Centerforce + 40k miles and nearing 400 whp... with no problems.. so i cant complain
Ummmm....Proof of 400whp please..
![](http://i7.tinypic.com/219ys7a.gif)
#14
Originally Posted by internetautomar
Nice new website
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#16
Originally Posted by MyGreenMax94
Ummmm....Proof of 400whp please..![](http://i7.tinypic.com/219ys7a.gif)
![](http://i7.tinypic.com/219ys7a.gif)
#17
Originally Posted by maxmaxima91
Well.. dyno proof.. dont have any yet.. but.. heres my reasoning. I was at the track with I30tmikeD from here on the org. who had just dynoed at i belive about 380 whp.. and i was traping the same MPH as he was (111 mph). and my car weighs about 3-400 pounds more. That was a few months ago.. and ive done a few more things since. thats as much proof as i can come up with
Ok...good enough for me...
![Wavey](https://maxima.org/forums/images/smilies/wavey.gif)
#19
Senior Member
iTrader: (1)
Join Date: Jan 2002
Location: Miami, FL. / Indianapolis, IN.
Posts: 2,610
Originally Posted by internetautomar
Thanks. Now I just have to hope it ends up working the right way ![Oh noes](https://maxima.org/forums/images/smilies/ohnoes.gif)
![Oh noes](https://maxima.org/forums/images/smilies/ohnoes.gif)
i have an Exedy Stage 1 clutch kit that i got last year for $110. i have a stock flywheel for now but it works fine for me.
#20
Originally Posted by maxmaxima91
Well.. dyno proof.. dont have any yet.. but.. heres my reasoning. I was at the track with I30tmikeD from here on the org. who had just dynoed at i belive about 380 whp.. and i was traping the same MPH as he was (111 mph). and my car weighs about 3-400 pounds more. That was a few months ago.. and ive done a few more things since. thats as much proof as i can come up with
Nice pics..nice to see anothet VG turbo
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
btw, what kinda rear sway bar u have?? ive got the same one, and theres a little confusion in another thread...
#21
Originally Posted by aminus21
Nice pics..nice to see anothet VG turbo
Are the internals all stock??
btw, what kinda rear sway bar u have?? ive got the same one, and theres a little confusion in another thread...
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
btw, what kinda rear sway bar u have?? ive got the same one, and theres a little confusion in another thread...
Sorry therealgoon9 for highjacking your thread.. i didnt mean to.
Jeremy
#22
Senior Member
iTrader: (1)
Join Date: Jan 2002
Location: Miami, FL. / Indianapolis, IN.
Posts: 2,610
Originally Posted by maxmaxima91
thanks.. Stock internals stock heads+cams.. and i have a suspension techniques sway bar.
Sorry therealgoon9 for highjacking your thread.. i didnt mean to.
Jeremy
Sorry therealgoon9 for highjacking your thread.. i didnt mean to.
Jeremy
#30
Originally Posted by MyGreenMax94
I like the new format,things seem to be easier to find..![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![got me](https://maxima.org/forums/images/smilies/ne_nau.gif)
#31
I have an Exedy 3 puck mated to a fidanza. It has chatter when it engages(very rough) and it grips like a scorn monkey. It makes me afraid to slam through the gears though; Borg Warner can't handle it.
,
,
Thread
Thread Starter
Forum
Replies
Last Post