Before you change the temp, make sure you....
Thread Starter
Member
Joined: Sep 2002
Posts: 140
Before you change the temp, make sure you....
....turn the fan off. I just changed out my heat and a/c controls on the dash (PITA), because the hot cold slider had broken. MyGreenMax94 has a good photo here:http://forums.maxima.org/showthread.php?t=491440
After I installed the new controller, I found out why the old one failed. If you have the fan at a high setting and try to move the temp from hot to cold,there was a lot of stress on the slider, making it difficult to move. Once I turned off the fan it moved normally. If you follow this advice, you could possibly save yourself several hours of work ripping out the dash.
After I installed the new controller, I found out why the old one failed. If you have the fan at a high setting and try to move the temp from hot to cold,there was a lot of stress on the slider, making it difficult to move. Once I turned off the fan it moved normally. If you follow this advice, you could possibly save yourself several hours of work ripping out the dash.
Thread
Thread Starter
Forum
Replies
Last Post
lux97Max
4th Generation Classifieds (1995-1999)
1
Sep 4, 2015 05:42 PM
sdotcarter
6th Generation Maxima (2004-2008)
2
Sep 2, 2015 09:53 PM