I30 interior in a 3rd gen
#8
#9
He's not really considering it, it's just that his purpose in life is to comment on JDM cars whenever possible.
#10
#11
alright folks im gonna start off buy saying that the front seat rails had to be modified to fit im gonna ask him how and what he did.the back seat (the part you rest you back on not the seat ) does'nt sit as flush like the standard 3rd gen seat might have to take a cookie and take some of the foam off.We had to use two small bracket to mount the back part on.witch will be covered by my and rack.The front seats sit up a tad bit higher than the standard 3rd gen seat (even with seat seat lowered).I didnt get the center console but it still is a thought. another thing to get used to is seeing the rear headrest in the rearview mirror a couple of times i had to do a double take.The set up make's the car pop being that my car is black with tan leather and no tints
#12
#13
ok here's some interior shots keep in mind that this not the fully finished product my bodyman and i still have some tweaking to do, plus i had new carpet put in so we also have to tweak that as well also keep in mind that the passenger seat is not installed yet. i had to pull the car from the shop cause i sold my J30 and we were down to one car but heres some pics sorry in advance for multi posting and the crappy cel pics if you notice the driver seat is a lil crooked but again i aint finish yet lol
#14
ok folks i have the front passenger seat mounted. they are slightly crooked a couple of washer will straighten that out. again as state before the brackets were modified. I.i.n.m the i30's floor is flat the 3rd gen isn't. you could also still use the original 3rd power seat buttons to move the seat fore and aft but i cannot recline it though (minor fix) Im also planning on mounting the auto dimming rearview mirror. after this setup is complete i planning finding the first gen M45 mirrors either those or the i think the 3rd gen? Q45 mirrors. while i had the interior apart i ran all of my mood lighting after that finish powdercoat key elements under the hood
#16
#17
another A31 question, anyone have any clue if A31 Cefiro chassis parts like the fender bars will work on a 3rd gen?
http://cgi.ebay.com/ULTRA-RACING-3-P...item230e387b9d
http://cgi.ebay.com/ULTRA-RACING-3-P...item230e387b9d
#18
another A31 question, anyone have any clue if A31 Cefiro chassis parts like the fender bars will work on a 3rd gen?
http://cgi.ebay.com/ULTRA-RACING-3-P...item230e387b9d
http://cgi.ebay.com/ULTRA-RACING-3-P...item230e387b9d
Last edited by Kountz430; 02-21-2011 at 11:57 AM.
#20
lol noooowhere close. a) wrong side. b) RWD car with big tunnel vs FWD car with small tunnel. c) different platform.
making an interior fit a car it doesn't belong in isn't as simple as wishing and hoping the parts into place... if the holes aren't in the same place then you'll be spending all month fabricating arms and hangers and tabs and whatnot to give yourself the right hardpoints IF the shape even physically fits.
making an interior fit a car it doesn't belong in isn't as simple as wishing and hoping the parts into place... if the holes aren't in the same place then you'll be spending all month fabricating arms and hangers and tabs and whatnot to give yourself the right hardpoints IF the shape even physically fits.
#21
another A31 question, anyone have any clue if A31 Cefiro chassis parts like the fender bars will work on a 3rd gen?
http://cgi.ebay.com/ULTRA-RACING-3-P...item230e387b9d
http://cgi.ebay.com/ULTRA-RACING-3-P...item230e387b9d
#22
Are you attempting to somehow put the I30 dashboard and door panels into the 3rd gen?
If not, and not to take away from what you've done, I don't really see how this is an interior "conversion"
If not, and not to take away from what you've done, I don't really see how this is an interior "conversion"
#23
nah im not putting the dash board or door panels in just a seating "upgrade" if you will my old seats were just beat the back seat had the usual sun fade and ripps i wanted more of a luxury feel. are your fenders rolled pulled james?
#24
The rear seat fits surprisingly well.. Got any better (brighter) pics of it? Particularly the sides where it meets the doors etc? Might be a viable option for 3rd gen torn up leather rears like you said
My rears are rolled and pulled just a bit and the front isn't rolled per se but I did use a rubber mallet and hit that inner lip up just a bit
My rears are rolled and pulled just a bit and the front isn't rolled per se but I did use a rubber mallet and hit that inner lip up just a bit
#25
The rear seat fits surprisingly well.. Got any better (brighter) pics of it? Particularly the sides where it meets the doors etc? Might be a viable option for 3rd gen torn up leather rears like you said
My rears are rolled and pulled just a bit and the front isn't rolled per se but I did use a rubber mallet and hit that inner lip up just a bit
My rears are rolled and pulled just a bit and the front isn't rolled per se but I did use a rubber mallet and hit that inner lip up just a bit
#29
Wow that is surprising. Good find!
Is that the i30 lower seat too?
I like that it's got headrests. I've always liked full headrests on rear seats. Is there a gap between the back of the seat and the package tray?
Is that the i30 lower seat too?
I like that it's got headrests. I've always liked full headrests on rear seats. Is there a gap between the back of the seat and the package tray?
#30
yup thats the lower seat as well.actually a slight gap when its in the closed position, i still have to finish tuckin the amp and speaker wires then i'll tighten everything down and give you guys the finished product
Last edited by Kountz430; 03-04-2011 at 12:52 PM.
#33
#34
"Rear deck" is a relatively modern term but they are essentially interchangeable
#35
alright folks im gonna start off buy saying that the front seat rails had to be modified to fit im gonna ask him how and what he did.the back seat (the part you rest you back on not the seat ) does'nt sit as flush like the standard 3rd gen seat might have to take a cookie and take some of the foam off.We had to use two small bracket to mount the back part on.witch will be covered by my and rack.The front seats sit up a tad bit higher than the standard 3rd gen seat (even with seat seat lowered).I didnt get the center console but it still is a thought. another thing to get used to is seeing the rear headrest in the rearview mirror a couple of times i had to do a double take.The set up make's the car pop being that my car is black with tan leather and no tints
#37
Kountz, I hope your feeling better. I think I"m going to through caution to the wind this weekend and go back and pick up the front seats and try to figure out how to the rails will need to be modified...
#38
the seat mounts( for lack of a better term) are different from the i30 to the max the i30's floor ifs flat do the test fit while your at the junkyard to see what im talking about i'll be doing my weekly junkyard tour and i'll post picks to show the comparison
#39
Okay, please post pics when you can... I ended up not throwing caution to the wind, because I ended up buying another VE, but this one is a 92 VE5! So I still have to get the front seats! I may go to the local pull a part tomorrow, I know they had a an I30 the last week when I was there, but I probably need to go back to the junkyard I got the rear seats from, because they were from and I30 Limited, so the center part of the leather is preforated.
Thread
Thread Starter
Forum
Replies
Last Post
sdotcarter
6th Generation Maxima (2004-2008)
2
09-02-2015 09:53 PM