3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

Quick question

Thread Tools
 
Search this Thread
 
Old 05-12-2013 | 10:49 AM
  #1  
Maxtastic GXE's Avatar
Thread Starter
Member
 
Joined: Sep 2009
Posts: 121
Quick question

I am in the process of ohm testing my injectors and according to the FSM there is an injector harness plug to test front injectors. I cannot find it,the FSM shows just a plug but not the location. anyone got a pic of it or where its at? I need only to test #2 injector. T.I.A
Old 05-12-2013 | 01:49 PM
  #2  
Laevateinn's Avatar
Senior Member
iTrader: (3)
 
Joined: Apr 2011
Posts: 349
From: Riverside, CA
If you want to test the injector alone, just disconnect the connector on top of it and put the leads across the terminals. If you want to test for operation, fire up the engine and disconnect the injector connector, and the engine should bog down if that cylinder is contributing. OR stick a metal screwdriver on top of the injector and use it as a stethoscope.
Old 05-12-2013 | 05:29 PM
  #3  
Maxtastic GXE's Avatar
Thread Starter
Member
 
Joined: Sep 2009
Posts: 121
Originally Posted by Laevateinn
If you want to test the injector alone, just disconnect the connector on top of it and put the leads across the terminals. If you want to test for operation, fire up the engine and disconnect the injector connector, and the engine should bog down if that cylinder is contributing. OR stick a metal screwdriver on top of the injector and use it as a stethoscope.
#2 is under the intake you cant reach it that way,Ive tested all other's already...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hez8813
5th Generation Maxima (2000-2003)
11
03-12-2020 12:06 AM
pears
5th Generation Maxima (2000-2003)
15
09-18-2015 05:25 AM
ef9
Buyer/Seller Feedback
0
09-10-2015 10:13 PM
Johnny9595
4th Generation Maxima (1995-1999)
5
09-03-2015 05:18 AM



Quick Reply: Quick question



All times are GMT -7. The time now is 11:20 AM.