3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

any mods since my heads are off

Thread Tools
 
Search this Thread
 
Old 07-09-2002 | 02:20 PM
  #1  
whooptiewoop's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2002
Posts: 26
any mods since my heads are off

92 GXE. I have a broken exhaust manifold bolt broken into the head near the firewall. since I have to take my head off to get the bolt machined out, what mods could I do since the top half of my engine is apart.
Old 07-09-2002 | 02:22 PM
  #2  
DA-MAX's Avatar
Eat, sleep, and sh*t 2JZ
iTrader: (10)
 
Joined: Nov 2000
Posts: 13,979
Re: any mods since my heads are off

do a search on "cams"

Originally posted by whooptiewoop
92 GXE. I have a broken exhaust manifold bolt broken into the head near the firewall. since I have to take my head off to get the bolt machined out, what mods could I do since the top half of my engine is apart.
Old 07-09-2002 | 02:33 PM
  #3  
Matt93SE's Avatar
STFU n00b!
iTrader: (44)
 
Joined: Aug 2000
Posts: 18,095
From: Houston
hmmm aside from the fact that you don't have to pull the heads to do that bolt, there's tons of things you can do to it- just have to have some brains and knowledge of cars.
Old 07-09-2002 | 02:41 PM
  #4  
whooptiewoop's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2002
Posts: 26
There is no way to use easy-out because of the angle of the bolt. Please explain how to take out the bolt without taking out the head.
Old 07-09-2002 | 02:42 PM
  #5  
Jeff92se's Avatar
I'm needing a caw
iTrader: (82)
 
Joined: Aug 2000
Posts: 34,146
Front or back side? Front should be easy. Back might be hard. I didn't take my heads off, I just took out the motor
Old 07-09-2002 | 02:45 PM
  #6  
whooptiewoop's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2002
Posts: 26
The bolt is on the firewall side. If you were sitting in the driver seat, it would be on the top left corner of the head.
Old 07-09-2002 | 04:36 PM
  #7  
Michael's Avatar
Back in a 3rd Gen.
iTrader: (21)
 
Joined: Jan 2002
Posts: 4,944
Originally posted by whooptiewoop
The bolt is on the firewall side. If you were sitting in the driver seat, it would be on the top left corner of the head.
I used a special angled drill extension that was 90 deg.

It worked pretty good on my 90.
Old 07-09-2002 | 05:06 PM
  #8  
Taegost's Avatar
Senior Member
 
Joined: Feb 2002
Posts: 605
From: Tampa Bay, Fl
Re: any mods since my heads are off

Originally posted by whooptiewoop
92 GXE. I have a broken exhaust manifold bolt broken into the head near the firewall. since I have to take my head off to get the bolt machined out, what mods could I do since the top half of my engine is apart.
http://www.hekimianracing.com/nissan3lna.html
Old 07-09-2002 | 05:20 PM
  #9  
DA-MAX's Avatar
Eat, sleep, and sh*t 2JZ
iTrader: (10)
 
Joined: Nov 2000
Posts: 13,979
Re: Re: any mods since my heads are off

Originally posted by Taegost
http://www.hekimianracing.com/nissan3lna.html
you want him to put that on top of the block already in his car??? you'll need a lot of duct tape
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
knight_yyz
5th Generation Classifieds (2000-2003)
12
11-01-2015 02:34 PM
worldwiderecognized
6th Generation Maxima (2004-2008)
0
09-30-2015 02:16 PM
jaydot901
7th Generation Maxima (2009-2015)
9
09-29-2015 02:18 PM




All times are GMT -7. The time now is 10:27 AM.