y pipes for 95-98 fed $170 shipped
#46
Originally Posted by maximacruizer
is it easy to install?
#48
Originally Posted by Cdg2125
Not usually. Very tedious to break the rusted bolts. I had to have my b-pipe installed because of the bolts but a shop would do it for cheap if you need them to.
Didn't mean to hijack the thread, bump also for a great pipe on the cheap...
also I wanted to add that this fit my federal spec 97 w/o issue
-Matt
#53
Any available still? Can you email the PayPal invoice? Or is it easier for you to do direct? Email me at pdettore@comcast.net please if any still available
#55
got mine yesterday..was soo excited I installed it last night after work..i could tell me car was anxious for the upgrade cuz it was relatively easy to do..long story short..WOW..thanks taz for the great deal (sorry for jacking the thread) anyone in the market for one should jump on these
#58
im interested...one question though.
what is better, this y-pipe or budgets y-pipe? Is this one mandrel bent? budget told me they were using the best flex section out there.
sorry for high jacking this..
what is better, this y-pipe or budgets y-pipe? Is this one mandrel bent? budget told me they were using the best flex section out there.
sorry for high jacking this..
#62
Originally Posted by taz
pm replied
#66
Thread Starter
Supporting Maxima.org Member
iTrader: (20)
Joined: Oct 2004
Posts: 589
From: vancouver, BC
I do still have a couple of these y pipes. Onlt thinkg you will need to install is a set of gaskets from the dealer. You could reuse your old ones, but they are cheap and it's good insurance to use new gaskets. No point doing the install twice because you wanted to save $10
#69
Originally Posted by Neo Raven456
Just to let you guy's who don't know, know the parts you will need are:
Two Crush Rings (Part #20691-85EE00)
One Flat Gasket (Part #20692-65J00)
Two Crush Rings (Part #20691-85EE00)
One Flat Gasket (Part #20692-65J00)
#70
Originally Posted by Neo Raven456
Just to let you guy's who don't know, know the parts you will need are:
Two Crush Rings (Part #20691-85EE00)
One Flat Gasket (Part #20692-65J00)
Two Crush Rings (Part #20691-85EE00)
One Flat Gasket (Part #20692-65J00)
#72
Originally Posted by Neo Raven456
Yep they are the Nissan part numbers, and OEM gaskets will fit
#73
Originally Posted by cardana24
Have you already installed your y-pipe with these gaskets? The reason I ask is because the last y-pipe I got I was told that it came with nissan gaskets and they were defiently too small for the new Y-pipe.
#78
Originally Posted by cardana24
Have you already installed your y-pipe with these gaskets? The reason I ask is because the last y-pipe I got I was told that it came with nissan gaskets and they were defiently too small for the new Y-pipe.
-Matt
#80
sound
so there have been a couple of you to put this pipe in allready, what do you think of the sound and does it sound like the bees in a can or is the flex sectioned lined at all.
...Taz ill send you a pm with my info
...Taz ill send you a pm with my info