XeroX

iTrader: (13)

I have a friend making cusom eyelids for the 4th gens, There are two types.

These fit on 97-99 housings AS WELL as the new one peice headlights that they are selling on ebay (r34 type headlights).

These are VERY good quality and made of fiberglass, they are very thin and flexible and attach using double sided tape like most eyelids.

In order to install these you will need to shave off the top "nipple" on the headlight housing as the eyelid must go over this part of the housing, there are are total of 3 (2 on the bottom and 1 on the top) you will need to shave off the ONE AT THE TOP ONLY. This was done on my max with some simple masking tape and a grinder....with the eyelid off, you cant even tell that the "nipple" was grinded off...very un-noticeable...

Now for PICS!

Small (thin) ones:
http://i3.photobucket.com/albums/y72...mallbetter.jpg
http://i3.photobucket.com/albums/y72...lesmallids.jpg
Close-up:
http://i3.photobucket.com/albums/y72...oseupsmall.jpg

Big (Thicker) ones:
http://i3.photobucket.com/albums/y72...ontbiglids.jpg
http://i3.photobucket.com/albums/y72...glebiglids.jpg
Close-up:
http://i3.photobucket.com/albums/y72...closeupbig.jpg

Comparison between the two:
http://i3.photobucket.com/albums/y72...resmallbig.jpg

Insallation process (shaving off the TOP nipple, this is after we shaved them) Its so small its hard to see after its shaved off. And you don't have to shave it completely flush.. just don't leave it taller then the double stick tape and it should be fine:
http://i3.photobucket.com/albums/y72...pleshaved2.jpg
http://i3.photobucket.com/albums/y72...pleshaved1.jpg

For non-org. members these normally go for 45 shipped

For org. members he is willing to let them go for 35 shipped.

Add 8$ if shipping to Canada

Paypal is cenvalref@aol.com

supazn

put me down for a set, I got a question though...is it just one big piece or 2 separate pieces (one for headlight, one for corner)?

XeroX

iTrader: (13)

They are a one peice design, the eyelids even cover the weather stripping on the corner lights completely. The eyelids sit flush to the fender on the top and the side of the corner light...VERY NICE....

If you want some closer pics ill c if i can take some closer pics...

VQA32SE_L

iTrader: (6)

Sweet....I will be getting a pair soon...I've been looking for ones that sit flush w/ the headlights, and corner llights....quick question... does shaving off the nipple on the headlight make a hole in the headlight? And did u shave it completly smooth or just enough for the eylid to fit??

Nice Eylids!!!

jattdemax

iTrader: (10)

nice...will be picking up a set next week

EpzMaxima96

iTrader: (1)

I want a pair of these! Definally umm when can I send the money and when can they be shipped? and what material and color do they come in?

AllMaxxedOut

iTrader: (15)

Being that they fit on the R34 headlights, could they also be used on cefiros?

TurTLe*

iTrader: (11)

cefiros are diffrent right off the bat. the shape and design.

r34 is just a one peice unit but it was design of a maxima headlight. cefiro is designed off the i30 headlights. hence the reason why i30's cant use r34. So i would say no to that unless he makes a custom one for u

4x4Max

iTrader: (12)

Where exactly do i send payment to, and details on which one i want?

The Law

iTrader: (39)

Hey guys, the guy that made the eyelids for xerox's car also did the 5 and 5.5gen eyelids. The material used is fiber glass. Also they come ready for paint.

aznthundrhed

iTrader: (2)

I want a pair of the thinner ones, pm me please!

XeroX

iTrader: (13)

1.aznthundrhed
2.4x4Max
3.EpzMaxima96
4.supazn

Figured i would get a list started.

Paypal is cenvalref@aol.com

When you send payment please specify if you want the small or larger ones.

XeroX

iTrader: (13)

You just shave them smooth...these eyelids sit flush to the housing...so you have to shave off as much as possible to get it to sit flush to the headlight...

NO there is no hole

EpzMaxima96

iTrader: (1)

ok Im at work I'll definally send you the money tonight...$35 correct and I want the thin ones

XeroX

iTrader: (13)

Sure i will let you know when they get shipped out, a friend of mine is making these, im just setting up the deal for him on here...He is making them for all sorts of cars (camry, altimas....etc...)

4x4Max

iTrader: (12)

If i send the money, will they get shipped out immediatly or do they need to still be made?

The Law

iTrader: (39)

He makes them on payment. After you send payment he will make it, takes a couple days then he will ship them and give you a tracking number.

XeroX

iTrader: (13)

Yea, he had 3 pairs when i stopped by 2 big and 1 small...and i picked up a pair of both...so he should have a set of the big ones laying around...but yes, he is making these on order...

4x4Max

iTrader: (12)

Ok sounds good to me. I want the SMALL ones!


Payment sent!

The Law

iTrader: (39)

Please remember to put which size eyelids you want.

XeroX

iTrader: (13)

Updated the pics of the nipple shaved off...look on 1st post...

EpzMaxima96

iTrader: (1)

I already paid and I asked for small :-)

The Law

iTrader: (39)

Please be patient with him since he makes them on order.

4x4Max

iTrader: (12)

When would you estimate i'll get mine?

XeroX

iTrader: (13)

I will try to get ahold of him tomarow and get a time estimate for you.

aznthundrhed

iTrader: (2)

sorry about this, take me off the list

i'm not gonna get this nemore

4x4Max

iTrader: (12)

did you get a hold of him?

XeroX

iTrader: (13)

I asked and it usually take about 2-4 days to make. Usually on average about 2 days...Then they get shipped out ASAP....

XeroX

iTrader: (13)

He makes them once payment is sent. So its kewl

EpzMaxima96

iTrader: (1)

I already sent my payment on 3/29 when will I be recieving mine?

supazn

money sent for the thick ones...let me know when i will be receiving them

XeroX

iTrader: (13)

Give it about a week or so, takes aboud 2-4 days to make them....And Im assuming it takes a few days to a week to get shipped to your door depending on where you live...

These are custom hand made each set.....Like Law said, please be patient.

ray_289

iTrader: (8)

you can add me to the list also, but i wont be able to pay until tues-weds of next week because im away untill then.

ray_289

iTrader: (8)

Do the bigger ones sit as flush as the thin ones? And is there a difference in the light output between the the small and bigger ones?

Thanks

4x4Max

iTrader: (12)

Just got mine on. I'll take some pics tomorrow and post em up.

Quality is good, they fit well and are smooth.

98whitemax

iTrader: (15)

are they still available

XeroX

iTrader: (13)

Yes the Big ones sit just as flush as the smaller ones...and to be honest light output was one of the biggest things i was concerned about when installing these...and to this day, i have not been able to notice any difference in light output...I have stock headlights in as well...no hyperwhite PIAA's or anything, just whatever the 97-99 headlights i bought came with...visibility is great even with the big ones...

XeroX

iTrader: (13)

There is really no list as of now...pretty much if you want em send the money and he will make you a set and ship em out...there is no real inventory of these...they are hand made upon recieving payment..

tonyrunna

iTrader: (9)

are these still for sale?

XeroX

iTrader: (13)

They are hand made by order like stated earlier in the thread.

As long as money is being sent these will be made untill he just decides to stop making them...