4th Generation Classifieds (1995-1999) The highly sought after variable intake may be a click away.

1999 Nissan Maxima GLE Parts out

Old Jun 27, 2007 | 03:59 PM
  #1  
a1c4nil's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2007
Posts: 175
From: Queens, NY 11435
F/S 99 Maxima GLE Parting out everything NYC

1999 Maxima GLE, Black Heated Leather w/ Side Impact Airbags Clean, Tan/ Gold Body Paint Code EVO-G. Engine Code: VQ30(DE) 2988. Let me know what you need. Trunk Lid is Black. shipping from: Queens NY 11435

PICS Now Available. http://home.earthlink.net/~fdm3

Parting out my 99 Maxima. Won't fix anymore. Have Everything.

See Pics Here...
http://home.earthlink.net/~fdm3/

Bose HU Connectors
Auto Climate Control: $40
TCS Traction Button $10
Dimmer Button $10
Heated Seats Buttons $15 Ea.
Tan Seatbelts: $35 each or $100 for the set
Driver Mirror Plastic: $10 Tan EVO Color
ECU 90
Alternator 60
Tail Light ON TRUNK 30 Ea or 50 set
Power Steering Pump 90
On Steering Cruise Ctrl Set Buttons 30
Signal/ Intermittent Wiper Thing 70 or 35 Ea.
Grille Emblem 5
Wipers Arms Both 20
Engine/ Motor Avail.
TRUNK LID IS BLACK COLOR
And lots of stuff like sensors etc.

AND THESE ARE ALSO STILL AVAIL:
Ecu
Pipe/ Muffler
Rear Struts with Coil/ Spring
Splash Shield
Front Calipers
AC/Heat Control Unit
Keyless Fobs
Evap Canister
Rear Brake Light
Dash Slide Out Drawer
Shift ****

And Whole Car with More Parts. Sorry about the delayed responses, very busy recently, but I do have a little extra time to part out the car now. Let me know what you're interested in, ALL MUST GO NOW.

Sold or NOT Avail: front PASSENGER Side RH headlight, RH corner, RH fender, FRONT strut, FRONT spring, FRONT axle(s), Transmission, Condenser, MAF, Radiator, Seats, Rear Bumper, Airbox, Pass. Mirror, Rotors, Speakers, Center Console, Corner Light. All else good.

Last edited by a1c4nil; Nov 30, 2007 at 03:00 PM. Reason: Update Availability & Price
Old Jun 27, 2007 | 04:12 PM
  #2  
wirelessdude04's Avatar
Senior Member
iTrader: (24)
 
Joined: Dec 2006
Posts: 4,870
From: Philadelphia, PA
pics please
Old Jun 27, 2007 | 04:16 PM
  #3  
Kevlo911's Avatar
Kevlo for President
iTrader: (36)
 
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
15shipped for the black trim around the guages, it holds the dimmer switch and stuff. I would also like that black plate next to the dimmer switch...
Old Jun 27, 2007 | 04:19 PM
  #4  
wirelessdude04's Avatar
Senior Member
iTrader: (24)
 
Joined: Dec 2006
Posts: 4,870
From: Philadelphia, PA
I need the clock and the mounting screws and groumets in the back off the center armrest there are two one on the left and one on the right
Old Jun 27, 2007 | 04:43 PM
  #5  
a1c4nil's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2007
Posts: 175
From: Queens, NY 11435
Black trim around guage

Originally Posted by Kevlo911
15shipped for the black trim around the guages, it holds the dimmer switch and stuff. I would also like that black plate next to the dimmer switch...
I'm not sure what it is, I'll take a look and let you know.
Old Jun 27, 2007 | 04:44 PM
  #6  
a1c4nil's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2007
Posts: 175
From: Queens, NY 11435
No pics as yet

Originally Posted by wirelessdude04
pics please

No pics as yet;
Old Jun 27, 2007 | 04:49 PM
  #7  
TurTLe*'s Avatar
Senior Member
iTrader: (11)
 
Joined: Feb 2005
Posts: 1,967
From: Chicago
10 shipped for the front lincese plate bracket?

i'll probaly have more but i cant think of anything right now.
Old Jun 27, 2007 | 05:40 PM
  #8  
supragt3297's Avatar
Senior Member
iTrader: (8)
 
Joined: Feb 2007
Posts: 154
rear trunk ? pics and price please.
Old Jun 27, 2007 | 05:58 PM
  #9  
bkmax96's Avatar
Senior Member
iTrader: (19)
 
Joined: Apr 2006
Posts: 541
From: poconos,pa+nyc
how much for the full leather
Old Jun 27, 2007 | 07:24 PM
  #10  
wetzelman1's Avatar
Senior Member
iTrader: (2)
 
Joined: May 2005
Posts: 555
From: Reading, MA
price shipped to 01867 for y pipe, b pipe and muffler.
Old Jun 27, 2007 | 07:32 PM
  #11  
brandnew's Avatar
Senior Member
iTrader: (5)
 
Joined: Nov 2006
Posts: 581
Aftermarket struts if so pm price 2 06106
Old Jun 27, 2007 | 07:45 PM
  #12  
RIPTIDER's Avatar
Supporting Maxima.org Member
iTrader: (9)
 
Joined: May 2004
Posts: 437
From: Lorton, Virginia
how much for the rear bumper to 22079?
Old Jun 27, 2007 | 08:40 PM
  #13  
WielkiWaac's Avatar
MaximaDriver
iTrader: (8)
 
Joined: Jan 2005
Posts: 1,696
do you have driver side splash shield?
Old Jun 27, 2007 | 08:52 PM
  #14  
maximariceboi's Avatar
Supporting Maxima.org Member
iTrader: (32)
 
Joined: Jun 2004
Posts: 2,354
PM you for the antenna
Old Jun 27, 2007 | 09:09 PM
  #15  
Tver_Chupra06's Avatar
Member
iTrader: (1)
 
Joined: May 2006
Posts: 70
hood picked up. im in the city too. but first: will a 99 hood fit directly onto a 95 max?
thanks
Old Jun 27, 2007 | 09:10 PM
  #16  
99SEmatic's Avatar
Member
iTrader: (4)
 
Joined: Sep 2005
Posts: 96
From: Plano, Tx
PM sent about driver side fender..
Old Jun 27, 2007 | 09:18 PM
  #17  
2AZN2DMAX's Avatar
Supporting Maxima.org Member
iTrader: (28)
 
Joined: Jun 2003
Posts: 574
From: Louisiana
$20 shipped for the center a/c vents if they are completely black.
Old Jun 27, 2007 | 09:24 PM
  #18  
vuiskool's Avatar
Senior Member
iTrader: (1)
 
Joined: May 2007
Posts: 260
do you have key fobs? keyless remotes. DIBS!
Old Jun 27, 2007 | 09:51 PM
  #19  
bklynzsleepy's Avatar
Supporting Maxima.org Member
iTrader: (20)
 
Joined: Jan 2004
Posts: 555
From: New York City, NY
fed spec or cali spec? interested in the y-pipe.
Old Jun 28, 2007 | 11:05 AM
  #20  
jojo98maxima
Guest
 
Posts: n/a
post the items u have for sale
Old Jun 28, 2007 | 12:00 PM
  #21  
a1c4nil's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2007
Posts: 175
From: Queens, NY 11435
Originally Posted by jojo98maxima
post the items u have for sale
See original post, I listed what I don't have, everything else I do have with a few missing stuff here and there. The list would be too long. I hope that's ok.
Old Jun 28, 2007 | 12:14 PM
  #22  
2AZN2DMAX's Avatar
Supporting Maxima.org Member
iTrader: (28)
 
Joined: Jun 2003
Posts: 574
From: Louisiana
So do you accept the offer or not?
Old Jun 28, 2007 | 12:35 PM
  #23  
a1c4nil's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2007
Posts: 175
From: Queens, NY 11435
Heater/ AC control Unit

Originally Posted by 2AZN2DMAX
So do you accept the offer or not?
Sorry about that, you're referring to the vent not the control unit, correct? If so, $25 is fine you pay s/h but... THIS I WOULD LIKE TO DONATE TO MAXIMA.ORG This seem like a site that's very supportive to the Maxima Community.
Old Jun 28, 2007 | 12:47 PM
  #24  
vuiskool's Avatar
Senior Member
iTrader: (1)
 
Joined: May 2007
Posts: 260
Originally Posted by a1c4nil
See original post, I listed what I don't have, everything else I do have with a few missing stuff here and there. The list would be too long. I hope that's ok.
do you have keyless fobs? it would be great if u answered our post.
Old Jun 28, 2007 | 01:00 PM
  #25  
a1c4nil's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2007
Posts: 175
From: Queens, NY 11435
Keyless Fobs

Originally Posted by vuiskool
do you have keyless fobs? it would be great if u answered our post.
Sorry about that. I don't know what you mean fobs, I do have the keyless entry remote. I'm trying to learn the terms as best as I can. I ask other people about the names but I have other stuff to do too.

I know a lot of the names but I'm still learning the terms.

Thanks for your understanding.
Old Jun 28, 2007 | 01:09 PM
  #26  
vuiskool's Avatar
Senior Member
iTrader: (1)
 
Joined: May 2007
Posts: 260
Originally Posted by a1c4nil
Sorry about that. I don't know what you mean fobs, I do have the keyless entry remote. I'm trying to learn the terms as best as I can. I ask other people about the names but I have other stuff to do too.

I know a lot of the names but I'm still learning the terms.

Thanks for your understanding.
Yes thats what i meant, i PMd u
Old Jun 28, 2007 | 01:17 PM
  #27  
Kevlo911's Avatar
Kevlo for President
iTrader: (36)
 
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
Any update on the gauge trim?
Old Jun 28, 2007 | 06:50 PM
  #28  
maximariceboi's Avatar
Supporting Maxima.org Member
iTrader: (32)
 
Joined: Jun 2004
Posts: 2,354
hey i sent a pm back to you last night. wondering if you are taking my offer and if not i can get one else where in 2 days. let me know.
Old Jun 28, 2007 | 08:26 PM
  #29  
a1c4nil's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2007
Posts: 175
From: Queens, NY 11435
Regarding the antenna

Antenna 40 + shipping but I can't do it til next week anyways, bussy...
Old Jun 28, 2007 | 08:31 PM
  #30  
a1c4nil's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2007
Posts: 175
From: Queens, NY 11435
Guage Trim

Originally Posted by Kevlo911
Any update on the gauge trim?
If you're talking about the Black piece around the Instrument Cluster. That thing is not even going to be shipped for 15.
Old Jun 28, 2007 | 08:39 PM
  #31  
Kevlo911's Avatar
Kevlo for President
iTrader: (36)
 
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
Originally Posted by a1c4nil
If you're talking about the Black piece around the Instrument Cluster. That thing is not even going to be shipped for 15.

never mind then
Old Jun 28, 2007 | 09:22 PM
  #32  
99SEmatic's Avatar
Member
iTrader: (4)
 
Joined: Sep 2005
Posts: 96
From: Plano, Tx
Any idea on the fender yet?
Old Jun 28, 2007 | 09:31 PM
  #33  
Ruartur's Avatar
Senior Member
 
Joined: Sep 2005
Posts: 128
From: NYC
I need the driver side headlight. I am in Queens, let me know.
Old Jun 28, 2007 | 11:25 PM
  #34  
a1c4nil's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2007
Posts: 175
From: Queens, NY 11435
Fender

Originally Posted by 99SEmatic
Any idea on the fender yet?
I told you it's too big to ship without damaging. Aren't you able to get it locally? I will call some carriers to find out but I'll be busy til next week. So I can't guarantee you anything. I'll try.
Old Jun 28, 2007 | 11:26 PM
  #35  
a1c4nil's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2007
Posts: 175
From: Queens, NY 11435
Driver Headlight

Originally Posted by Ruartur
I need the driver side headlight. I am in Queens, let me know.
PM'd about headlight
Old Jun 28, 2007 | 11:34 PM
  #36  
96blkonblkse's Avatar
Senior Member
iTrader: (18)
 
Joined: Jul 2003
Posts: 2,862
From: Vancouver
evap canister control purge valve. Black valve with 3 rubber lines going into it. Its right beside the throttle body.

How much shipped to 98281.

thanks
chris
Old Jun 29, 2007 | 06:21 AM
  #37  
ay5800's Avatar
Senior Member
iTrader: (2)
 
Joined: Jan 2001
Posts: 324
passenger side air bag?
Old Jun 29, 2007 | 07:25 AM
  #38  
hiren_patel_83's Avatar
Supporting Maxima.org Member
iTrader: (2)
 
Joined: Jun 2006
Posts: 689
From: Lawrenceville, GA
Originally Posted by a1c4nil
Parting out my 99 Maxima, I decided not to fix as of today. Have everything except front passenger side headlight, corner, fender, strut, spring etc. All else good.

1999 Nissan Maxima GLE, Black Leather Clean, Tan/ Gold Body. Let me know what you need, you can PM also.

I need the clock and the air vents (the whole piece). Let me know hos wmuch shipped to GA 30024
Old Jun 29, 2007 | 07:46 PM
  #39  
Kevlo911's Avatar
Kevlo for President
iTrader: (36)
 
Joined: Dec 2000
Posts: 35,755
From: Lake Orion, MI
How is 30shipped for the maf sensor? You can put it in one of those prepaid bubble wrapped bags at usps/fedex to save on shipping
Old Jun 29, 2007 | 07:53 PM
  #40  
gautam's Avatar
Newbie - Just Registered
 
Joined: Jun 2007
Posts: 10
DO you go the driver and passenger headlights?

Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:01 AM.