i need a EVAP canister control valve, and if you have any QNO white grilles lying around, id be interested. PM me.

 

stock midpipe (wedge-shaped box with accordion hose attached)

dunno if all years are the same, but i have a 98

 

Hey Id like the radio. Should I send the payment to the same paypal as last time? I purchased a clock from you not too long ago.

I was wondering how much it would be if you could throw in a rear caliper bolt as well.

And clear out some PM's so I can send you my address again.

 

Black 5 Speed shifter bezel. in Decent condition...

thanks

 

looking for 2 hood struts

 

I have the climate control i will check on the vents.

 

Cleared the pm's. You need just the bolt or the pin as well.Paypal is the same josephcook@cableone.net

 

I will have to check on this one. I know i have one from a 95 but it has an addational hose and resonator box.

 

Sorry i don't

 

Let me check i may.

 

Might you have a brake master cylinder with abs 95-99? Abs are the ones with the black fluid cap and only two connections (1 front, 1 rear), as opposed to the yellow capped one with 2 fronts and 2 rears. Shipping to 05360. Thanks!

 

Do you have a starter left on one of ur 98's??

 

95-96. Front Left Fender, Deep Evergreen or Black Emerald preferred

 

I need a passenger side rear caliper for a 97. Price and shipping to 68137, thanks!

 

passenger fog light
drivers side headlight

 

do you have any of these for a 97 max? po 325 Knock senor, po 600 tcm, po400 EGR valve?? shipped to va 22980..

 

u also have any front speakers and a back spoiler for 97 nissan?

 

u have the full wheel bearing for front passenger side for a 97?

 

I do have one. Do you need the booster as well or just the master cylinder?

 

Yes i do $70 shipped to canada

 

Let me check i may. If i do $50 shipped

 

No foglights. I will check on the headlight.

 

I have a knock sensor $40,tcm $30 and egr valve $20.
No spoiler.
I do have a pair of 6 1/2 alpine speakers and a set of four 6 1/2 rockford fosgate speakers.$50 for each pair

I do have the spindle/wheel bearing $100

 

Do you have an EVAP vent control valve (the one on the canister, not the intake manifold) for a 97 SE? I can't quite PM yet, so my email is bigjay0213@hotmail.com

I can check the build date on the car tonight and make sure it's compatible with whatever parts car you pull it off of

Please let me know. Thanks!

 

Ok check PM

 

Do you have any good front passenger side fenders? What about a front bumper cover?

 

do you have a pebble beige 4th gen maxima that you are still parting out?

 

how much for both rear shocks shipped to 30005?

 

I Need 95 Maxima
Both Fog Lights
Antenna And Motor
Hood Struts

Can You Give Me A Price On It . Thanks

 

whats up man,
I wanted to know how much you wanted for the bumper wire harness w/ light socket for the small light that clips on the bumper. I also need the little screw on the light that clips on the bumper and the little plastic that it clips to.
thanks.
shipping to zip 91744

 

i need an ecu for a 99 max se

 

how about a white driver side front fender, ac condensor and dryer?

also the urethane bumper cover thing if you got it.....

 

Sorry i have neither

 

I need a proportioning valve off of a Nabco master cylinder. If you have one, how much shipped to 02149?

Thanks,
- Matt

 

So you need a master cylinder form a car without abs?

 

Hey man, you happen to have some sunroof shims you'd be willing to sell and ship? Shoot me a price, I'm looking for like 6 or so. Thanks!

 

The only shims i remember are for the glass. Are these the ones you need? If so for 6 of them $5 shipped. Or if you need any other items i could throw them in for free.

 

Hello again. Thanks for those two parts (evap parts)

What I need now is the front bumper cover (se model - with foglights) 96.
Preferably beige.

Thanks

 

Your welcome,No bumper. I actually need a beige one myself.

 

All 4 exterior BLACK door handles. How much shipped to 33410?