Garage cleanup: Trim parts, engine, and performance parts
#1
Garage cleanup: Trim parts, engine, and performance parts
Hello everyone,
As some of you know, i had a turboed 98 Maxima which was vandalized while i was on deployment. It was totaled 2 years ago but i never had the time to dig in my Military shipment which contained everything i had at the time. Now i'm bored and i wanted to clean up, here are some of the parts i dug up so far with many more to come later:
1) Orange sticker MAF from the TT >>>>>>>>> 100 bucks
2) Crank pulley, with less than 5000 miles on it, bought it for $320, 75 bucks
3)New tie rod still wrapped 10 bucks SOLD
4)High HP axles/ driveshafts, many boosted members used them with success, rated at 500+ hp , those are LSD 100
5)Steering rack and pinion, used 50
More to come in the following posts. All prices are plus shipping and paypal fees. Pm me if interested in a part and i'll pm you my paypal address... thnx everyone......
As some of you know, i had a turboed 98 Maxima which was vandalized while i was on deployment. It was totaled 2 years ago but i never had the time to dig in my Military shipment which contained everything i had at the time. Now i'm bored and i wanted to clean up, here are some of the parts i dug up so far with many more to come later:
1) Orange sticker MAF from the TT >>>>>>>>> 100 bucks
2) Crank pulley, with less than 5000 miles on it, bought it for $320, 75 bucks
3)New tie rod still wrapped 10 bucks SOLD
4)High HP axles/ driveshafts, many boosted members used them with success, rated at 500+ hp , those are LSD 100
5)Steering rack and pinion, used 50
More to come in the following posts. All prices are plus shipping and paypal fees. Pm me if interested in a part and i'll pm you my paypal address... thnx everyone......
Last edited by mad-max98; 02-18-2009 at 09:45 PM.
#2
6) Lower intake manifold, bought it for a porting project 25
7) Upper manifold with the IACV 40 bucks and 2 bare manifolds 20 each
8)Brake master cylinder 20 bucks
9)Euro clear lights, as you can see still new in wraps 20 bucks SOLD
10) black center console, got it when i did the black interior conversion, very good condition, small scratch a head of the cup holder, small cut where the handbrake goes is invisible when installed, comes with the lid which goes for a $100 by itself 75 bucks
7) Upper manifold with the IACV 40 bucks and 2 bare manifolds 20 each
8)Brake master cylinder 20 bucks
9)Euro clear lights, as you can see still new in wraps 20 bucks SOLD
10) black center console, got it when i did the black interior conversion, very good condition, small scratch a head of the cup holder, small cut where the handbrake goes is invisible when installed, comes with the lid which goes for a $100 by itself 75 bucks
Last edited by mad-max98; 02-18-2009 at 09:45 PM.
#3
11) black trim, all door sills with less than 5000 miles on them, 50 bucks
12) A pillars, black, new in wraps as you can see in the pic 50 bucks
13) Radio trim in good condition, needs cleaning or wet sanding 10 bucks
14) AC trim including controls, needs cleaning 20 bucks
15) Roof lamp thing 10 bucks
16) 2 Kickdown panels, excellent condition 25 bucks
17) 2 C pillar panels, good condition 30 bucks
12) A pillars, black, new in wraps as you can see in the pic 50 bucks
13) Radio trim in good condition, needs cleaning or wet sanding 10 bucks
14) AC trim including controls, needs cleaning 20 bucks
15) Roof lamp thing 10 bucks
16) 2 Kickdown panels, excellent condition 25 bucks
17) 2 C pillar panels, good condition 30 bucks
#7
All prices are plus shipping and paypal fees.
The tie rod is Nissan tie rod.
I will ship too if needed, pickups get a discount, I'm in la county city of hawthorne.
I have more parts to come; 300zx calipers, front wheel bearing, another complete rack and pinion and brand new E manage blue with all accessories, I just didn't have time to take pics.
If you need full quotes, send me your zip and I'll check for ya as soon as I go home. <phone is a little painful to browse with>
Thnx everyone...
The tie rod is Nissan tie rod.
I will ship too if needed, pickups get a discount, I'm in la county city of hawthorne.
I have more parts to come; 300zx calipers, front wheel bearing, another complete rack and pinion and brand new E manage blue with all accessories, I just didn't have time to take pics.
If you need full quotes, send me your zip and I'll check for ya as soon as I go home. <phone is a little painful to browse with>
Thnx everyone...
#8
Btw left the car at off base housing in a town that didn't like the military so much, and hell no I ain't in the air force lol u got a corpsman here bro, so call me doc like u always do hahahahaha
#9
ooh your such a squid! lol
sorrry to hear about your misfortune but i got a question for u. my max doesnt have lsd but it is the open box tranny and have that old lsd that stillen used to sell. im going to intall it soon, but after install will i be able to use your axles?
sorrry to hear about your misfortune but i got a question for u. my max doesnt have lsd but it is the open box tranny and have that old lsd that stillen used to sell. im going to intall it soon, but after install will i be able to use your axles?
#10
Hmmmm, don't know much about stillen's box. My guess is if it's a bolt on on I30's or 2000 maxima's then they should work with these axles. I gotta actually confirm that they're Raxles, it's been a while since I bought most of my stuff, so I'll look into it some more
#12
tie rod end and clears though shipped to 53944 Lyndon Station, WI
#13
do you still have the axels? and tie rod? if you do email me madracer152@hotmail.com ill be able to contact you quicker i need em asap
#16
do you still have the axels? and tie rod? if you do email me madracer152@hotmail.com ill be able to contact you quicker i need em asap
#19
#22
#24
Thread
Thread Starter
Forum
Replies
Last Post
Roman777NYC
5th Generation Classifieds (2000-2003)
5
11-07-2015 10:13 PM
Greenmaxspeed
4th Generation Classifieds (1995-1999)
6
08-31-2015 09:06 PM