4th Generation Classifieds (1995-1999) The highly sought after variable intake may be a click away.

Tons of parts: Ignition Harness/Sensors/Coilpacks/Injectors/almost new starter, etc

Thread Tools
 
Search this Thread
 
Old Nov 14, 2009 | 07:20 AM
  #1  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
Tons of parts: Ignition Harness/Sensors/Coilpacks/Injectors/almost new starter, etc

9 Month old starter available. $80 shipped OBO.

Remanufactured Alternator good and less than year and a half old $90 shipped

One set of good working coilpacks
$70 shipped for set of 6



headlights (glass is good, but a couple of the mounting studs were corroded and broken off) $40shipped for set or $25 shipped each one

Taillights - $50 shipped for outers or $60 shipped for all 4


the huge dash harness and chassis harness with associated fuse box and relay boxes, all fuses and relays working - make offer on each harness

TWO ignition harnesses brand new one was used for about 6 months one was purchased for my other max and never even installed (discovered the problem I was having was something else) $25 shipped each one


crank ref and crank position sensors (CPS REF, CPS POS) I think I have multiples of these from various VQ30s I've had over the years. $20 shipped per sensor contact me so I can figure out how many i actually have, I have multiples

CAM position sensor $15 shipped

TWO throttle bodies each with TPS sensors $45 shipped or will sell TPS sensors separate for $20 shipped (specify if you need the single connector TPS or 2 connector TPS because I have one of each)


TWO upper intake manifolds (USIM) $45 shipped

TWO IACV valves $40 shipped

Lower Intake Manifold $30 shipped

one set of stock size Deatschwerks fuel injectors, fully cleaned flowed and balanced, never installed still sealed in bags $140 shipped


All 4 interior door pulls (the thing you pull on to close the door) $10 shipped each

arm rest top (not entire center console assembly, just the arm rest part). $20 shipped

manual climate control (I can't remember if the LEDs work or not since it's been like 6 months since I've really driven this max and I have 3 maxes so I can check and see if they work, otherwise you can replace them with custom colors easily, there is a writeup on the .org) $35 shipped

Single din change tray with flip lid $20 shipped


all window switches working $20 shipped

driver's door window/door lock switch panel $25 shipped

driver's side door harnesses (both front and rear) intact (passenger side not available I cut those ones before deciding to take the time to actually remove the driver's side harnesses intact). make offer

passenger side window switch harnesses (front and rear) snipped with plenty of wire length to splice in to yours if needed $10 shipped or will throw in with window switches

Last edited by Nealoc187; Mar 1, 2010 at 04:20 PM.
Old Nov 17, 2009 | 09:48 PM
  #2  
thegodson1's Avatar
Member
iTrader: (1)
 
Joined: Nov 2009
Posts: 174
From: Riverside, CA
dang neal nobody responded to this? hey do you got that stock rubber air duct piece that attaches to the throttle body, just that one part between the throttle body and the resonator?
Old Dec 21, 2009 | 07:03 AM
  #3  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
I don't think I saved any intake pieces but I will check.

Bump by the way. One set of coilpacks sold, one set of 6 still available.
Old Dec 30, 2009 | 06:15 AM
  #4  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
wtf, no one needs good used parts?
Old Jan 1, 2010 | 06:07 AM
  #5  
MaxxKid's Avatar
Senior Member
iTrader: (9)
 
Joined: Mar 2008
Posts: 386
From: Brooklyn NY
i need the ignation setup the switch and everything
Old Jan 2, 2010 | 08:51 PM
  #6  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
all i have for ignition stuff is the harness.
Old Feb 18, 2010 | 06:05 PM
  #7  
mejiseike's Avatar
Member
 
Joined: Feb 2010
Posts: 106
From: Colorado 80401
Hi i was wondering if you still had the starter?
Old Feb 18, 2010 | 06:56 PM
  #8  
adamsanders's Avatar
Senior Member
iTrader: (12)
 
Joined: Aug 2007
Posts: 469
From: Cleveland/Columbus, Ohio
Still have the ignition harness that has never been used?
Old Feb 18, 2010 | 07:18 PM
  #9  
L2theBR's Avatar
Member
iTrader: (3)
 
Joined: Dec 2009
Posts: 97
From: Massachusetts
PM sent
Old Feb 19, 2010 | 04:39 PM
  #10  
thegodson1's Avatar
Member
iTrader: (1)
 
Joined: Nov 2009
Posts: 174
From: Riverside, CA
any o2 sensor for the y?
Old Feb 20, 2010 | 10:06 PM
  #11  
AustinTylerDean's Avatar
Junior Member
iTrader: (1)
 
Joined: Apr 2006
Posts: 87
PM sent about the injectors. Also would like the two connection TPS.
Old Feb 21, 2010 | 06:10 PM
  #12  
AustinTylerDean's Avatar
Junior Member
iTrader: (1)
 
Joined: Apr 2006
Posts: 87
NealOC, where are joooosss?
Old Feb 22, 2010 | 10:54 AM
  #13  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
Originally Posted by thegodson1
any o2 sensor for the y?
nope those are gone.
Old Feb 22, 2010 | 10:55 AM
  #14  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
Originally Posted by adamsanders
Still have the ignition harness that has never been used?
Yes
Old Feb 22, 2010 | 10:57 AM
  #15  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
Originally Posted by mejiseike
Hi i was wondering if you still had the starter?
Yes, I still have it.


Originally Posted by adamsanders
Still have the ignition harness that has never been used?
Yes, I do.

Originally Posted by L2theBR
PM sent
Responded to your PM.
Old Feb 23, 2010 | 10:57 AM
  #16  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
Here's a pic of the ignition harnesses (both). They just happened to be easy to grab when I had my camera in my pocket while looking for something else.

Old Feb 23, 2010 | 12:13 PM
  #17  
ajm8127's Avatar
Senior Member
iTrader: (8)
 
Joined: Feb 2009
Posts: 1,065
From: Pittsburgh
I want a LIM. PM me your email and we'll do a paypal transaction. I trust it's in good working order.
Old Mar 1, 2010 | 04:21 PM
  #18  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
One LIM sold, one still available.
Old Mar 4, 2010 | 09:46 PM
  #19  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
bump
Old Mar 7, 2010 | 02:03 PM
  #20  
deezo's Avatar
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Apr 2001
Posts: 14,285
From: FV, NC
Neal, did the other guy take the starter off your hands? Also, which color is the armrest?

Too lazy to re-grease my starter and my armrest is dry-rotted.

Hit me.

Last edited by deezo; Mar 7, 2010 at 02:06 PM.
Old Mar 7, 2010 | 07:32 PM
  #21  
Steve31's Avatar
Member
iTrader: (5)
 
Joined: Sep 2008
Posts: 155
From: Mississippi
PM sent
Old Mar 21, 2010 | 09:25 AM
  #22  
akoi's Avatar
Newbie - Just Registered
 
Joined: Mar 2010
Posts: 2
still got starter?
Old Mar 21, 2010 | 01:21 PM
  #23  
defiance's Avatar
Senior Member
iTrader: (1)
 
Joined: Apr 2009
Posts: 649
From: USA - New Joisey
Still have the set of ignition coils ?
Old Mar 21, 2010 | 04:46 PM
  #24  
gustav's Avatar
Newbie - Just Registered
 
Joined: Aug 2009
Posts: 10
From: San Diego
5MT flywheel?
Old Mar 24, 2010 | 11:02 AM
  #25  
Nealoc187's Avatar
Thread Starter
SLOW
iTrader: (23)
 
Joined: Mar 2001
Posts: 14,617
From: West burbs, Chicago
Originally Posted by gustav
5MT flywheel?
yes I do have a 5MT flywheel for sale.

still have ignition coils

still have starter
Old Apr 16, 2010 | 04:29 AM
  #26  
kingrukus's Avatar
no more maxima...
iTrader: (41)
 
Joined: Oct 2001
Posts: 4,294
From: Toronto, ON
Park/Neutral position switch on MT?
Old Apr 20, 2010 | 05:55 PM
  #27  
rdw72777's Avatar
Member
 
Joined: Apr 2009
Posts: 138
Still got the 2 connector TPS?

Might need it, gotta test it tomorrow.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
Oct 2, 2022 02:13 PM
user 11122324
5th Generation Maxima (2000-2003)
42
Jul 18, 2022 03:35 PM
AaronL
5th Generation Maxima (2000-2003)
15
Aug 8, 2020 10:31 AM
maxima297
4th Generation Maxima (1995-1999)
4
Sep 30, 2015 03:32 PM
msellas
4th Generation Maxima (1995-1999)
2
Sep 23, 2015 09:16 PM




All times are GMT -7. The time now is 09:11 AM.