FS:00VI COMPLETE KIT
FS:00VI COMPLETE KIT
ITS A COMPLETE KIT THROTTLE BODY AND ALL IM ASKIN FOR 325 Shipped OBO AND I'll Ship it same day. I really need this gone asap
Kit consist of:
UIM.....50
LIM.....50
FUEL RAIL......45
INJECTOR CLIPS.......50
INJECTORS........50
BLOCK OFF PLATE........35
REAR VALVE COVER.......45
REAR COIL PACKS........50
5TH GEN THROTTLE BODY(with tps and iacv)........65
And a manual vias switch
Kit consist of:
UIM.....50
LIM.....50
FUEL RAIL......45
INJECTOR CLIPS.......50
INJECTORS........50
BLOCK OFF PLATE........35
REAR VALVE COVER.......45
REAR COIL PACKS........50
5TH GEN THROTTLE BODY(with tps and iacv)........65
And a manual vias switch
Last edited by VQphantom; Dec 26, 2009 at 10:41 PM.
BUmp!!! Im up for trades to im looking for the rear stillen valences ,a mevi,in dash tv and/or some decent rims
PM me and letme kno what ya have
PM me and letme kno what ya have
Last edited by VQphantom; Dec 5, 2009 at 07:44 AM.
trade for a retrofit? link: http://forums.maxima.org/4th-generat...n-goodies.html
Junior Member
Joined: Apr 2009
Posts: 51
From: Salisbury,Maryland
dnt knw 2 much about this setup is this a 5th gen manifold and is it a direct bolt up system for my 99 and i wanted to get the nwp spacer kit would i still need the 4th gen spacer kit or would i have to get the 5th gen spacer kit
Its pretty much a direct bolt on. You'd have to use the 5th gen spacer kit.
Junior Member
Joined: Apr 2009
Posts: 51
From: Salisbury,Maryland
o.k sounds good i live in md could i get it for a cheaper price if i were to pick it up also do you happen to knw the hp gains with this kit and is everything in this kit that i need to hook it up to my 99 because im very interested in this kit
A oovi is a Variable intake from a 2000-01 max which is swapped over to a 4th gen .The way it work is u remove the 4th gen upper and lower and replace it with the 5th gen 00-01 Upper/lower intake manifold and what this manifold does is it allows more air to move in to the motor at a cooler temp. The oovi has a actuator on the inside that opens at any rpm u want with the help of a switch(or rpm switch).Its Gives u 20 peak hp at redline when with the stock manifolds the power drops off horribly at redline.Its also a fairly easy swap ive done 4 swaps myself and the gains u get from it is awesome. And with the 00vi tuned it is a beast.
A oovi is a Variable intake from a 2000-01 max which is swapped over to a 4th gen .The way it work is u remove the 4th gen upper and lower and replace it with the 5th gen 00-01 Upper/lower intake manifold and what this manifold does is it allows more air to move in to the motor at a cooler temp. The oovi has a actuator on the inside that opens at any rpm u want with the help of a switch(or rpm switch).Its Gives u 20 peak hp at redline when with the stock manifolds the power drops off horribly at redline.Its also a fairly easy swap ive done 4 swaps myself and the gains u get from it is awesome. And with the 00vi tuned it is a beast.
Member
Joined: Apr 2009
Posts: 64
From: plano
thanks for the info man, it was rly helpful...im trying to bring my max back to life, doing some replacments and routine maintenance stuff, then after that im gonna try and do simple mods, bolt ons and stuff to make a little quicker. so im just collecting info for now.
A oovi is a Variable intake from a 2000-01 max which is swapped over to a 4th gen .The way it work is u remove the 4th gen upper and lower and replace it with the 5th gen 00-01 Upper/lower intake manifold and what this manifold does is it allows more air to move in to the motor at a cooler temp. The oovi has a actuator on the inside that opens at any rpm u want with the help of a switch(or rpm switch).Its Gives u 20 peak hp at redline when with the stock manifolds the power drops off horribly at redline.Its also a fairly easy swap ive done 4 swaps myself and the gains u get from it is awesome. And with the 00vi tuned it is a beast.
Oh ok no prob
i have someone that might be inerested if you have the complete package
friend asks lol i have to type lol
"whats the manual switch to engage the vias dan has a summit. do you have the EGR tube for the setup or just the block off plate. and have you removed the VIAS and checked the VIAS Cup?"
lol he needs to make a ORG account But refuses to lol
friend asks lol i have to type lol
"whats the manual switch to engage the vias dan has a summit. do you have the EGR tube for the setup or just the block off plate. and have you removed the VIAS and checked the VIAS Cup?"
lol he needs to make a ORG account But refuses to lol